Mechanical Face Seals Dealers

• Material Grade: SS 316, SS 304
• Working Temperature: -20 to 150 degree celsius
• Working Pressure: Up to 10 bars
• Brand Name: SENAA SEALS
• Brand Name: SENAA SEALS
• Temperature Range: Up to -20 to 150 degree celsius
• Speed: Up to 4000 Rpm

• Type: Industrial Seals
• Shape: Round
• Finishing: Polished
• Automation Grade: Automatic
• Temperatures ranges: 538° C (1000° F)
• Pressure ranges: 1206 KPa (175 psid)

It is vital part of Mechanical Seal remain static in housing. It is non-moving part hence gives good life once fix properly. Stationary faces are available in different shapes like D, L, T, H, Du eTungsten Carbide. Stationary face fits in housing with Elastomer in various shapes to stop leakage. It can be designed in any other shape also suiting to application. 

All type of mechanical faces SiC,Carbon,TC

Mico seals specialise in manufacturing genuine Replacement Mechanical Seals for all major Pump manufacturer. we have well over 10 years of experience in the provision of Pump Mechanical seals for all applications. Our experience and Technical ability allow us to offer our customers original Replacement Mechanical Seals for Pumps at a significantly lower price than that of the pump maker. Advantages of dealing with Micro Seals: Best single source for all makes of mechanical seals. In-depth knowledge of mechanical seals for all pumps. Stock of all Major brand mechanical seals for immediate dispatch. We maintain the integrity of pumps through supply of genuine equipment. Available Range: Kirloskar Pump Mechanical Seals. Ksb Pump Mechanical Seals. Flowserve Pump Mechanical Seals. Grundfos Pump Mechanical Seals. Johnson Pump Mechanical Seals. Alfa Laval Pump Mechanical Seals.  

Mechanical seal fundamentals A mechanical seal must contain four functional components: 1) Primary sealing surfaces, 2) Secondary sealing surfaces, 3) a means of actuation and 4) a means of drive. 1) The primary sealing surfaces are the heart of the device. A common combination consists of a hard material, such as silicon carbide or tungsten carbide, embedded in the pump casing and a softer material, such as carbon in the rotating seal assembly. Many other materials can be used depending on the liquid's chemical properties, pressure, and temperature. These two rings are in intimate contact, one ring rotates with the shaft, the other ring is stationary. These two rings are machined using a machining process called lapping in order to obtain the necessary degree of flatness. 2) The secondary sealing surfaces (there may be a number of them) are those other points in the seal that require a fluid barrier but are not rotating relative to one another. 3) In order to keep the two primary sealing surfaces in intimate contact, a means of actuation must be provided. This is commonly provided by a spring. In conjunction with the spring, it may also be provided by the pressure of the sealed fluid. 4) The primary sealing surfaces must be the only parts of the seal that are permitted to rotate relative to one another, they must not rotate relative to the parts of the seal that hold them in place. To maintain this non-rotation a method of drive must be provided. With the growth of process industry the appropriate measured and the SEALING TECHNOLOGY adopted itself to meet the requirements.

M.K. Ceramics offers mechanical seal faces, which are designed to prevent leakage between a rotating shaft and its housing under conditions of extreme pressure, high shaft speed and temperature. Combination of ceramic/carbon-graphite seal faces are ideal choice for leak proof, maintenance free applications.   They provide longer life and greater operating safety. At M.K. Ceramics we manufacture mechanical seal faces in various sizes and compositions like Ravituff 99, Ravituff 95, Eco Alumina, Steatite and SAZ. Hi Alumina Ceramic Seal Faces (Ravituff 99 / Ravituff 95) : Alumina is commonly used as a mating ring together with carbon-graphite opposing seal face. Alumina exhibits high hardness, good abrasion resistance, high strength and stability. This makes them suitable for high load, varying shaft speed and high temperature applications. Also provides longer service life and operating safety. They are lapped within 20 micron and polished within 2 light bands and diameter is ground +/- 0.05 mm, for precise fitting in mechanical seal kits.The uniform micro structure also helps the retention of a fluid film at the interface of sliding components. Eco Alumina : With a very innovative idea, we have introduced High-Alumna seal faces with slightly low Alumina content for cost effective mechanical seal faces. Steatite / SAZ Ceramics : Have comparatively less hardness than Alumina. They are suitable for low load and low speed applications.  

Mechanical Face Seals are a special form of mechanical seals. They are also known under other designations, such as lifetime seals, floating seals, duo cone seals, toric seals and heavy duty seals. There are two different types of Mechanical Face Seals: Type DO is the most common form that uses an O-Ring as a secondary sealing element. Type DF has an elastomer with a diamond-shaped cross section as a secondary sealing element instead of the O-Ring. To search for available articles, please use the Electronic Catalog.  

Mechanical face seals or heavy duty seals are specifically engineered for rotating applications in extremely arduous environments where they withstand severe wear and prevent ingress of harsh and abrasive external media.

mechanical face seals, lapping tools, Double Mechanical Seals

mechanical face seals, Gasket Material, flotech siphon elbow, chemical seal

mechanical face seals

Toric Seals, duo cone seals, floating seals, Metal Face Seals

mechanical face seals, Oil seal kit, Ceramic Seals, nbr seals

mechanical face seals, Industrial Chiller, Evaporator Coil Cooler

4 Wheeler Mechanical Face Seals

Mechanical Face Seal

mechanical face seals, static seals

mechanical seal faces, Water Pump Seals, Metal Bellow Seals, Gaskets

mechanical face seals, Heavy Duty Seals, duo cone seals, Bushings