Metal Cutting Fluids Dealers

• Colour After Emulsification: Milky White
• Kinematic Viscosity @ 40 °C, Min, cSt: 20
• Flash Point, COC °C, Min: 150
• Copper Corrosion @100 °C, Min: 1
• Cast Iron Corrosion Test, 20:1 Emulsion with 400 PPM Hard Water Max: 0/1-1
• Emulsion Test: 400 Ppm Hard Water 5:1 and 20:1 Ratio: Pass

Application areas : Suitable for all metals for machining operations where emulsifiable oil are normally used. The recommended concentration is between 5 to 10 % depending on the severity of machining. Sometimes used successfully for even grinding operations.Performance benefits : Good surface finish Built in protection against bacterial growth Excellent emulsion stability Good heat removal properties

Z Premium Metal Cutting Fluid,The two main tasks of cutting fluid are cooling and lubricating. ... As well as cooling machinery, cutting fluids also help metalworking processes by lubricating the area between the cutting edge of a tool and the chip

BECHEM’s range of metal cutting fluid range are fortified with advanced additives the Avantin series of metal cutting fluids are equipped to contend harsh external impurities such as hydraulic oil, swarf and grinding dust whilst delivering unmatched performance.

General Qualities & Characteristics Mex solube cut is a specially compounded emulsifying cutting oil composed of a petroleum oil and special emulsifiers. It mixes readily with hot or cold water. It forms homogenous and exceptionally stable emulsions, which show no apparent separation after long periods of usage or storage. It also incorporates special biocides to increase coolant life and prevent unpleasant odors experienced as a result to bacterial infection. Meets the specification requirements of IS 1115-1986 and DEF STAN 91323/1(Grade ZX - 1)   Application Requirements : Metal cutting and grinding operations generate heat. The prime requirement, therefore, is to select a fluid, which will reduce generation and increase dissipation of heat. The effectiveness with which this is accomplished has a direct bearing on increasing feed, speed, tool life, and improving surface finish. An efficient and economical way to control heat is to use the excellent cooling properties of water, combined with the lubricating properties of oil. Additionally, an effective cutting and grinding fluid must contain anticorrosion properties to protect the work piece during the manufacturing process. Another characteristic which enhances it usefulness is stability, whether in use or in storage. Recommendations Mex soluble cut is preferred choice for grinding and for machining operations where is of utmost importance. It meets the basic application requirements described above in highly satisfactory and economical manner. Mex soluble cut is usually diluted to oil/water ratios ranging from 1:10 to 1:60. because there are so many variables to be considered from job-to-job, it is impractial to make a specific recommendation of optimum oil to water ratios. However, in general, the richer emulsions are used for the more difficult jobs, the intermediate for the free-machining metals and the lean mixtures when preparing emulsions of Mex soluble cut, always add oil to water. Stability of the emulsions is enhanced when it is put through a homogenzation processes.   Available Packaging: 26Ltr, 50Ltr and 210Ltr.

• Application: Metal Working Fluid
• Appearance: White Transparent Color
• Emulsion: Stable Milky White
• Pack Size: 26Ltr and 210Ltr
• Pack Type: PP Container
• Shelf Life: 2 Year

• Country of Origin: India
• Brand Name: Gold
• Packaging Type: Drum
• Grade: Cut S01, Performance Super Drill 100, Performance Gear Cut 32
• Normal Machining Operation: 4% to 5%
• Difficult Machining Operation: 10%
• Grinding Operation: 2% to 4%
• Packaging Size: 210 Liter
• Appearance: Bright & Clear
• Packaging Size: 20 Ltr and also Available 26,50 & 210 Liter.

These cutting oils are more commonly referred to as soluble oils. This however, is a misnomer because they are not really soluble in water but form an emulsion when added to water. These emulsifiable oils are mineral oil based concentrates, which contain emulsifiers that allow them to mix with water and form a milky white emulsion. They also contain additives to improve their lubricating properties, rust and corrosion inhibitors and a biocide to help control foul smell.

• Usage/Application: Industrial
• Brand: SPEL
• Packaging Type: Bottle, Bucket, Drum etc.
• Packaging Size: 1- 210 L
• Form: Liquid

Sited in Udaipur(India), we guarantee safe side deliveries of consignments in a time limited period. As a trusted name, we always make sure that our products are properly packed and remain free from damage during transit. For this, we have hired an adroit team of experts having immense experience in packaging.

Our valued customers can avail high quality Cutting Oil that is immiscible with water and does not contain any free sulphur. Have outstanding detergency and wetting properties, the offered oil is ideal for removal and grinding applications. These oils are widely used for various metal and machinery operations. The offered oil is processed with a mixture of refined mineral oil base stocks and selective non-corrosive & non-active sulphurised fatty oils.

We share glorious credentials in the list of top Manufacturers, Exporters and Suppliers of Metal Cutting Fluid from Delhi, India. The formulation of our Metal Cutting Fluid is based on a blend of paraffinic mineral base oils plus suitable additives. When it comes to delivering Metal Cutting Fluid, we use fast shipment modes so as to ensure its prompt and timely delivery at the customers’ end.   Applications : As an emulsion lubricant and coolant suitable for application in most type of machining and metal working operations.   Advantages : Mixed readily with water to form stable emulsions Good rust preventive and anti-foam properties Formulated to effectively remove heat from metalworking operation Emulsion resistant to freezing and additive separation Protection against bacterial growth and deterioration Low- staining characteristics   Preparation : Soluble oils are prepared for use by mixing them with relatively large portions of water. The oils must always be added to the water. Never add the water to the oil. Usually one part oil is stirred into four parts water. Adding water to this mixture then makes the desired dilution. Oil should never be added directly to the existing emulsion. For best emulsion stability, rust and bacterial growth protection, low hardness water should be used to prepare emulsions. It is important that the correct oil-water proportions be maintained in service.Evaporation in the water, which is espacially rapid inmachining operations that developed high temperatures, may enrich the emulsion excessively. Conversely, finely divided prticles carried away by the emulsion may, when filtered out, remove more oil form the emulsion than water and thus make the emulsion leaner. Oil concentration should be checked at any time. With the oil separated from the water, its concentration can easily be observed and corrected as necessary by adding an emulsion with definite concentration. Avoid strong suitable oils below freezing temperatures. If freezing should occur, re-warm to room temperature and mix product well before using.

We are offering metal cutting fluids. spel cut so 30 soluble cutting oil bis 115 : 1991.

Metal Cutting Fluids, conveyor chain lubricants, Machinery Oil

Metal Cutting Fluids, Lubricating Oils, hydraulic fluids

Metal Cutting Fluids, Hydraulic Oils, silicone oils, Gear Oils

Powerzone MF Oil, manufactured based on a blend of paraffinic mineral base oils plus suitable additives to provide reliable properties for the recommended applications. Applications: As an emulsion lubricant and coolant suitable for application in most type of machining and metal working operations.

Metal Cutting Fluids, Grease, Speciality Oil, Industrial Lubricants

Metal Cutting Fluids, industrial coolant, Metalworking Fluid, cutting fluid

neat metal cutting fluids, Die Casting Machines, Rust Remover

Metal Cutting Lubricant Fluid, Power Milling Chuck, ACME Taps

CUT-Setral-SSZ 221, Silicone Grease, Coratex Purging Emulsion