Metal Gathering Machine Dealers

• Application: Engine Valves , Hand tools, Fasteners, Pushrods, Bolts, timer pins, torsion spring rods, spline shafts etc.
• Type: Horizontal, hydraulically operated.
• Range: 20-500kVA
• Advantage: Saving on material and machining cost.
• Benefit: Saves on multiple upsetting strokes otherwise required.
• Features: Smooth and Precise Hydraulic control.
• Performance: Continuous, scale free upsetting.

• Country of Origin: India
• Color: Green
• Driven Type: Electric
• Country of Origin: Made in India
• Power: 150 Kva
• Body Material: Mild Steel
• Finishing Type: Polished
• Usage/Application: Industrial

We are offering metal gathering machine

• MODEL: Heat Rating of Machine , Bar range optimum from to
• TMG/V-25: 25 , 18
• TMG/H-100: 100 . 20-40

Kejetherm Metal Gathering Machine is fully hydraulically operated with Resistance Heater. Principle of Operation Metal Gathering operation consists of heating the part of the job and pushing the remaining cold material of the job into hot zone till the required metal gathering takes place. Advantages By employing Metal gathering many of the well known technical limitations and disadvantages of mechnical upsetting can be overcomed. Simultaneous heating and forming in one machine. Almost unlimited gather in one operation. The mechanical upsetting limitation of about 3 x dia. no longer applies. The modern engine valve has an upset length of up to 20 x dia. and lengths of upto 40 x dia. are commonly electro-upset. No longitudinal flash is formed such as is unavoidable in a split-die mechanical upsettler. No waste of heating energy or material. Outside of the upset volume can be precisely controlled to allow subsequent, "flashless" forging in closed dies. Always ready for instant use, no warm up period. Energy efficient, about 0.35 - 0.40 kwh kg. Minimal scaling because of simultaneous heating and gathering. Improved die life in subsequent forging operations. No environmental pollution by emission of heat, fume or exhaust gas. Free upsets can be finished forged without re-heating and so save time and energy. Consistant heating temperature through the use of thyristor control. Optimal grainflow and fault free surface. The unheated bar length remains unchanged.

Our range of Metal Gathering Machine is user friendly and can be operated with ease. Our Metal Gathering Machine requires low maintenance and works consistently in any kind of environment. They are heavy duty and customers can choose from the Metal Gathering Machine range as per their work requirements. The Metal Gathering Machine is designed to operate smoothly and its sturdy construction ensures its durability. We believe in customer satisfaction and the Metal Gathering Machine is appreciated by the clients everywhere.

• Voltage: 440 V
• Weight: 700 Kg
• Power: 25 KVA
• Feature: Noise free and environmentally friendly against oil furnace and up-setter.
• Brand Name: Paras
• Height: 58 inch
• Model No: PMGM-25
• Length: 40 inch
• Width: 32 inch

Product Specification Item Unit Rated Supply V 400 ± 10% Phase Ph. 2 Frequency Hz. 50 Load KVA 30 Max. Diameter of Rod mm 16 Max. Dia. of Gathered Head mm 50 Max. Gathered Force Kgf. 50670 Max. Lenght of Gathered head mm 75 Clamping Force Kgf. 85

we are metal gathering machine specialists with more than 28 years of experience in this field, vast experienced staffs are working for the design and manufacturing of quality metal gathering machine. This machine is well developed and standardized products and their robust design gives an edge over competitors. The company's success is based on the close co-operation with our trend-setting customers. As a result, perfect achieves a high innovation rate. Our good position in design and production technology provides our customers with first class solutions. 'perfect' machines set new standards by innovations, quality and customer's satisfaction.  

Resistance Heating and Upsetting Machines are designed for use in drop forging and valve industry. Generally upsetting can be applied to almost any application calling for the gathering of stock material to enable a component to be produced with the minimum of press works. The perfect “grain-flow” obtained, together with extremely short heating times the upsetting machine is ideal for a variety of jobs and almost in all cases no external or additional heat is required for the subsequent forging operations. These machines are employed for the production of a wide range of shapes and sizes such as formation of beads, bulbs, collars, stops and flanges on rods as well as tube stock as required in the manufacture of parts like valve heads, bolt heads, control rods, bobbins etc.   A typical application of this machine is to produce upset blanks for the subsequent manufacture of engine valves.   Specifications: Type(Vertical or Horizontal):Actuated by pneumatic hydraulic or fully hydraulic system. Standard Rating:Pneumo Hydraulic:15,30.45 KVA Hydraulic: 15,30,45,75,100,150,200 and 300 KVA.  Workable Materials:Low, medium and high carbon steels, special alloy, stainless steel, non-ferrous material such as copper, brass, bronz etc. Upsetting Forces:The work piece is firmly gripped in pneumatically/hydraulically operated sliding contact dies. one end of the rod rests on the upset slide operated from pneumatic/hydraulic cylinder; the top end of the rod which is to be upset rests against the anvil whose movement is controlled by an adjustable hydraulic flow control valve. The transformer output is connected between the clampingdies and the anvil. On application of the ram pressure and high amperage current, the length of the work piece between the clamping dies and anvil heats up and gather. Simultaneously, the rod is slowly pushed through the clamping dies and the anvil is retracted gradually until the required shape of bulb is formed. Semi-automatic Operation:Apart from the material loading and unloading of the work pieces, all machine operations are carried out automatically. Construction: The main frame of this machine is of heavy, rigidly reinforced welded steel plate construction. It combine a compact, streamlined appearance and maximum resistance to mechanical deflection. the frame will support the transformer, gathering cylinder with adjustable ram, hydraulically controlled retracting anvil assembly and contact clamps, all these features being generally as detailed below.   Gathering Cylinders:Upsetting pressure will be provided from a double acting Air/ Hydraulic cylinder, mounted on the machine and coupled to a slide mounted on the machine and coupled to a slide mounted on which will be provided a replaceable cup locator to locate and support the free end of the stock prior to and during the up-setting sequence.   Screw adjustment will be provided on the coupling between the operating piston and the saddle unit to cover for a wide range of component lengths. Upset pressure will be applied automatically at the correct point in the operating sequence, and will be removed when an adjustable dog operates a limit switch. The length loss can be adjusted by adjusting the position of the limit switch dog. Contact Clamps:These clamps are arranged to engage on the diameter of the bar to complete the heating current circuit and will be an air/hydraulically operated assembly fitted with one set of replaceable clamp inserts. The clamp assembly provides initial support to the incoming bar blank and thereafter retracts to free the heated blank for transfer away from the machine.   Anvil Assembly:The unit comprises of a slide mounted in line with the contact clamps, and supporting a water cooled electrode holder which will be lifted with the replaceable anvil pad. The complete sub-assembly is arranged to retract along sideway during the upsetting sequences at a retraction rate controlled by a closed circuit hydraulic system incorporating a variable orifice flow control valve. On completion of the upsetting sequence the heat will be returned to its start position by pressing the reset push button.   Air/Hydraulic Control:The machine will be supplied complete with all the necessary air/hydraulic control equipment, including air line filter, lubricator, gauges, pressure regulator, heat exchanger, pump motor, control valves etc.   Water flow Switch: Can be supplied as optional for machine and thyrister control.

Metal Gathering, metal gathering machine, multi process welding machine

metal gathering machine, Welding Torch, Welding Transformer

metal gathering machines, Arc Welding Machine, electro plating rectifiers

metal gathering machine, Apfc Panels, Electrostatic Oil Cleaner

metal gathering machine, dc tig welding machine, pneumatic welding machine

metal gathering machine, Flash Butt Welder, portable spot welder

metal gathering machines, Friction Welding Machines, Friction Welding Machine

metal gathering machines, Spot Welding Machines, arc furnace

metal gathering machine

metal gathering machines, flash butt welders

Metal Gathering, Window Section Flash Butt Welding Machine