Metal Sleeve Dealers

As per DIN 2187 Standards. Manufactured from case hardened steel. Used for extending the taper shanks tools. Precision ground from both inside and outside in A grade goods.

• Country of Origin: India
• Diameter: 10-15mm
• Certification: ISI Certified
• Application: Fitting Use
• Color: Grey

• Country of Origin: India
• Size: 13
• Type: Laptop Sleeve
• Material: Polyester, Rexine
• Application: To Carry Laptop
• Color: Multicolor
• Feature: Attractive Designs, Easy To Carry, Good Quality, Nice Look
• Brand Name: Digiscape
• Brand Name: Digiscape
• Weight: 200gms

We manufacture non-standard machined components based on drawing supplied.

• Material: Metal
• Diameter: 15-20mm
• Certification: ISI Certified
• Application: Fitting Use
• Color: Grey
• Feature: Corrosion Resistant, Fastener

A shaft sleeve is a cylindrical hollow metal tube placed over the shaft to protect as it passes through the packing. Pump shafts are often protected from erosion, corrosion, and wear at leakage joints, seal chambers, internal bearings and in the waterways by renewable sleeves. The most common shaft sleeve function is that of protecting the shaft from packing wear at the stuffing box. A shaft sleeve used between two multistage pump impellers in conjunction with the inter-stage bushing to form an inter-stage leakage joint is called an inter-stage or distance sleeve.

• Material: Cast Iron
• Brand Name: Royal
• Condition: New
• Part Type: Sleeve
• Shape: Round
• Thickness: 12mm

• Type: Roller Sleeve
• Thickness: 2-3inch
• Application: Interior
• Color: SILVER
• Feature: Exceilent Strength, Excellent Design, Smooth Finish
• Condition: New
• Finishing: Plain
• Packaging Type: Corrugated Box

We are the main supplier of this product.

• Morse Taper Hole (IN): 1
• Morse Taper Shank (OUT): 1

Extension Sleeves Jump Sleeves Used For Extending The Taper Shank Tools. Precision Ground From Both Inside & Outside In "A" Grade.

• Price: Rs 12,000 / Piece

We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution network, our warehouse enables us to maintain year round availability of products.We have a modern warehouse equipped to store a variety of products in bulk amount. Besides our wide distribution. We are immensely accredited for delivering the orders within the stipulated time frame as we have the latest transportation facilities.Features : Durable nature Good quality

Pre Stressed Metallic Sleeve » General The pre-stressed metallic sleeves supplied are used for pipeline defects repair by the shielded metal arc welding process (SMAW). The pipelines repaired are manufactured by the Electric Resistance Welding (ERW) technique. The specification of material of construction is API 5L Gr B, X42, X46, X52, X56, X 60, X 65, X70 - PSL 1 - PSL2 (minimum yield 245000 / 52000 / 60000 / 65000 / 70000), ASTM A36 (structural; minimum yield 36,000 psi), ASTM A572 GR42, GR50, GR55, GR60, GR65 (structural; minimum yield 29,000 psi), ASTM A516 GR55, GR60, GR65, GR70 (pressure vessel; minimum yield 38,000 psi), ASTM A537 Class I, Class 2, Class 3 (pressure vessel; minimum yield 50,000 psi), EN 10025 - S235, S275, S355, S450 The pipelines nominal size is 2" NB to 60" OD and Thickness 4 mm to 100 mm. » Design & Construction The pre-stressed sleeves are of full encirclement split type and are manufactured by a production process, that minimizes occurance mill defects. Axial edges of the sleeves are bevelled to form 60° weld angle on assembly for the horizontal butt joint. A recess on the inner side of each pair of half sleeves is machined (cut out) to accommodate a 3 mm thick by 18 mm wide backing strip along the horizontal joint. The backing strips are manufactured from the same material as the sleeves and supplied. Circumferential edges of the sleeves is pre-fabricated to form 90° lap joint with the pipe.The internal diameter of the sleeves is designed and constructed so as to fit on the pipe withour leaving a gap between the inner surface of the sleeve and outer surface of the pipe all around.On assembly prior to welding, the maximum root gap shall be 3.0 mm on both horizontal joints. A 1.5 mm root face shall be allowed on both edges.Both the horizontal and circumferential edges shall have a smooth finish.The sleeve surfaces shall be protected from corrosion by a suitable method such as coating with corrosion resistant paint or other acceptable methods. » Feature Lightweight for easy handling and installation.Eliminates costly downtime.Minimizes repair costs. » Dimensions The Sleeves shall be manufactured to the standard lengths of 1.0 m and 3.0 m for any diameter of pipe.The backing strips shall be manufactured in standard lengths of 3m. » Material Material used are structural quality carbon steel or pressure vessel quality carbon steel plates, which are to ASTM specifications, and in the following grades:API 5L Gr B, X42, X46, X52, X56, X 60, X 65, X70 - PSL 1 - PSL2 (minimum yield 245000 / 52000 / 60000 / 65000 / 70000)ASTM A36 (structural; minimum yield 36,000 psi)ASTM A572 GR42, GR50, GR55, GR60, GR65 (structural; minimum yield 29,000 psi)ASTM A516 GR55, GR60, GR65, GR70 (pressure vessel; minimum yield 38,000 psi)ASTM A537 Class I, Class 2, Class 3 (pressure vessel; minimum yield 50,000 psi) EN 10025 - S235, S275, S355, S450The chemical composition does not exceed the percentages specified for the ASTM material ordered. Repair sleeves are fabricated from plate with low carbon equivalency for good weld ability.The maximum allowable carbon equivalency (CE) quality carbon steel plates will be based on the heat analysis.The maximum allowable carbon equivalency (CE) pressure vessel quality carbon steel plates will be based on the heat analysis, in most cases. Note : The sleeve can be manufactured in any grade as per the application & client requirements. » Mill Test Certificate Mill test certificate will be provided for the whole batch supplied, accordingly. » Packing The Sleeves shall be packed in wooden boxes suitable for outdoor storage. These boxes will be constructed so as to allow handling with either overhead crane or fork lift or mobile Crane.The 2 pieces comprising a pair of sleeves will be clearly marked for ease of identifaction of matching parts.Each box will be clearly marked to indicate size, length and number of complete pair of sleeves packed therein. These markings will be made by indelible ink that can withstand adverse outdoor weather effects.The sleeves will be packed seperately according to their length.An appropriate packing material shall be used to separate individual pieces so as to avoid damaging the corrosion resistant paint coating.The backing strips will be packed in fully enclosed wooden boxes. This boxes shall be constructed so as to allow opening and closing of the top side to ease the removal of strips. » Size We can manufacture Pre-stressed Metallic Sleeve for any size depending on the client's requirement.

• Specifications: Dimensions DIN 46228, Part 4 Surface: Tin Plated Insulated: Free of halide Synthetic Material: Polypropylene Etc.

We bring forth for our clients an extensive range of End Sleeves With Insulating Sleeve that can be custom-built as per the client's specifications. Our production experts make use of quality assured copper to manufacture these end sleeves. Furthermore, the use of advanced machines and latest technologies has made these products durable & capable of withstanding extreme temperature conditions.

MASTA Adapter and withdrawal BEARING SLEEVES are available in mm and inch size complete with lock nuts and looking washers. The SLEEVES are slotted and heaving external taper of 1:12 to suit corresponding bearing inside shaft hole taper. Adapter sleeves are available in H 200, H 300, H 2300, H 3000, H 3100 Series for millimeter and HE SERIES for inch size.  

• Material: Titanium
• Type: DLV-TS-MU
• Color: Silver Black
• Use: Dental
• Shape: Round
• Quality: Optimum

We are a leading Manufacturer and Suppliers of Metal Sleeves based in India. Designed to precision, the Metal Sleeves that we offer are widely used in a number of industrial applications. These Metal Sleeves are specially manufactured using quality checked metals. Thus, our Metal Sleeves are rust free and durable as compared to others available in the markets. Moreover, the clients can obtain these qualitative Metal Sleeves, at market leading prices from us. Specialty Excellent qualityDesigned by expertsFine finishingDimensional accuracy Used At Power industryCement industrySteel industry