TTA-10 Torsion Testing Machine
Get Price Quote
1 Piece (MOQ)
Digital Torsion Testing Machine
300,000 - 1,200,000 Per Set
1 Set(s) (MOQ)
We are the prominent Manufacturer & Supplier of high performance Digital Torsion Testing Machine. Fabricated using high-grade parts and components, our Digital Torsion Testing Machine is acknowledged for excellent performance, high strength, accurate results and longer service life. Our machine is thoroughly inspected by our quality analysts and complies with the set standards. We make available our Digital Torsion Testing Machine at market leading rates. Features : 5 Digit 7 Segment ½ inch Red LED Display for LOAD Indication 4 Digit 7 Segment ½ inch Red LED Display for Angle of Rotation 2 Digit 7 Segment ½ inch Red LED Display for Number of Rotation Selection of Units Kgm or Nm for load Selection of Units Deg or Rad for Angle of Rotation Real Time Clock for report generation Password to safeguard unauthorized access for calibration and other important settings Multifunction Keyboard to select the parameters Data storage of last 25 Test Reports. The data of all the settings and reports is in memory even if power is absent. Report Printing facility on DOT MATRIX 80 column printer Rs232 communication facility(optional) Potential free NO contact(rated 2A @ 230Vac) to START/STOP TEST cycle. Safety Fuse Link(20mm) rated 230V,1A provided inside the controller NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Best Deals from Metal Testing Equipment
Erichsen Testing Machine
Get Price Quote
1 Piece (MOQ)
We are prominent names in the industry in offering a wide range of Erichsen Testing Machine. Our precision engineered erichsen testing machines facilitates faster and trouble free operation. The Erichsen deep drawing test has a deep rooted hold on modern industry. Deep drawing is the conversion of a plain sheet blank, into a hollow body by drawing the material into the female die with a punch. A pressure plate is employed to prevent the formation of wrinkles in the bank; this holds the bank against the female die which, in some cases is called the furrow holder.Technical data:Width of Ample: 70-90 mmThickness of sample: 0.1-2 mmLeast count: 0.01 mm Additional Information: Item Code: RET-20 Production Capacity: UP TO 2MM / 5MM Delivery Time: 4 Packaging Details: WOODEN
Fischerscope Gold Purity Analyzer
Get Price Quote
Gold testing machine in assaying centres: XAN220 is available in various technical specifications these are widely used for fast and non-destructive analysis and coating thickness measurement of gold and silver alloys. These are optimized X-ray fluorescence measuring instruments, acclaimed for compact size and consistent performance.These are widely used for the analysis of precious metals and their alloys in composition and coating thickness and used for the measurement of up to 24 elements in the range of chlorine (17) to uranium (92). Our products are extensively acclaimed for its excellent accuracy and long term stability.These are admired for high functional efficiency, time saving quality and effective usage. Owing to its good detection sensitivity and high accuracy, these are widely recommended by large numbers of clients.Design These are user-friendly bench-top instruments available in various housing size and support stage. These are extensively recommended by clients owing to its quick and easy sample positioning. These are available in different range including XAN 220 and XAN 222, which are fitted with small parts and for quick and easy sample positioning. The X-ray source and semiconductor detector assembly is located in the instruments lower chamber. These are straightened with the integrated video microscope with zoom and crosshairs simplifies sample placement and allows precise measuring spot adjustment. These are operated through the powerful and user-friendly WinFTM® software. The FISCHERSCOPE X-RAY XAN 220 is designed as per DIN ISO 3497 and XAN 222 fulfill ASTM B 568 standard. Typical fields of applications Jewellery, precious metals and dental alloys Yellow and white gold Platinum and silver Rhodium Alloys and coatings Multi layer coatings
Computerized Torsion Spring Testing Machine
Get Price Quote
XGM-550 Gold Testing Machine
1,800,000 Per Piece
1 Piece (MOQ)
Analog Torsion Testing Machine
Get Price Quote
1 Piece (MOQ)
Shri ram industries offer torsion testing machine (sri tt 10), which are designed to check torsional property of various metal wires, tubes and bars. Further, we also calibrate these machines as per the latest and relevant industry standards.
Digital Torsion Testing Machine
Get Price Quote
1 Piece (MOQ)
FEATURES Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by torque transducer system. Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque and angle of twist. The accuracy of torque indication is + 1% of the true torque. The electronic control panel is built using 8085 microprocessor which incorporates state of the art technology with following features – Front panel membrane type key board for test setup. 7 seg digital display of load displacement/extension. Printer port interface. Serial port for communication with PC. Storage of important parameters such as peak load & maximum displacement after test. Preload selection to take care of initial slippage. Optional real time graph & PC software.
Torsion Testing Machine
50,000 Per Piece
Torsion Testing Machine
Get Price Quote
1 Piece (MOQ)
Mechanical Torsion Testing Machine
250,000 - 700,000 Per Piece
1 Piece (MOQ)
Torsion Testing Machine
Get Price Quote
1 Piece (MOQ)
Features Suitable for Torsion and Twist test on various metal rods and flats. Torque Measurement by pendulum dynamometer system. Auto torque selector to adjust torque ranges. Geared motor to apply torque to the specimen through the gearbox. For Analog Model Autographic recorder for the relation between torque and angle of twist For Digital Model Digital Display for Torque & Angle Accuracy + 1 % of the true torque
Cast Iron T Slot Bed Plate
Get Price Quote
Broadway foundry and engg works manufactures cast iron floor plate,cast iron bed plates,cast iron foundation plates,t slot surface plates,cast iron marking plate,cast iron lineation plate,cast iron inspection plate,t slotted floor plates,t slotted bed plates,cast iron angle plate,cast iron l plate.
LADA 100 Si Pin Gold Purity Testing Machine
Get Price Quote
1 Piece (MOQ)
EDS 8800 SDD Gold Testing Machine
1,650,000 - 1,875,000 Per
1 Piece (MOQ)
Industrial Endoscope
Get Price Quote
Industrial Endoscope Boroscope Pipeline is used for rapid diagnosis of corrosion, cracks, welding quality, surface smoothness, blockage and collapse. Suitable for searching subjects under deep sea, this industrial endoscope and borescope is also used for sewage pipes, industrial pressure pipes, under snubbing unit, water pipe etc. These pipeline detector are user friendly and high performer for remote visual inspection. This products are design to provide optimal solutions for applications.
Digital Torsion Testing Machine
200,000 Per Piece
1 Unit (MOQ)
torsion tester
Get Price Quote
Digital Flexural Strength Testing Machine
Get Price Quote
1 Piece (MOQ)
Compliance with following International Standards: As per IS: 516, IS: 9399, BS: 1881, ASTM C78 100 kN Capacity flexural machine with Digital Load Indicator cum controller.
Torsion Testing Machine
Get Price Quote
Torsion Testing Machine we offer is used on diverse metal wires, tubes and steel materials. We are recognized as one of the dependable Torsion Testing Machine Manufacturers and Suppliers in India. The Torsion Testing Machine offered by us is made up of excellent quality materials that ensure notable features like high durability, effective performance and low maintenance. We supply Torsion Testing Machines at market leading rates. Detail Fixed with auto torque selector to regulate torque ranges Contains geared motor to apply torque to specimen through gearbox Attached with autographic recorder for relation between torque and angle of twist Accuracy + 1 % of the true torque Suitable For Torsion and Twist test on diverse metal rods and flats Torque Measurement by pendulum dynamometer system
Conical Mandrel Bend Tester
11,000 - 14,000 Per Piece
1 Piece(s) (MOQ)
The conical mandrel bend tester is used to determine properties of a coating. Resistance to cracking detachment from its substrate and its elongation during the test. Conical mandrel test is also known as standard method for assessing the flexibility and the adhesion properties of coatings when these are subjected to bending stresses This is accomplished by bending the test material around a conically shaped metal bar. The conical mandrel bending test is a commonly used for testing for painted or coated panels.
Gold Testing Machine
6 Per piece
1 piece (MOQ)
Torsion Testing Machine
Get Price Quote
1 Piece (MOQ)
Torsion Testing Machine is designed for conducting Torsion and twist tests on various metal wires, tubes, sheet materials. Torque measurement is by Pendulam. We are a unique entity in the industry, actively committed towards providing an optimum quality range of Torsion Testing Machine.
Cast Iron Test Bed Plate
7,500 Per Piece
100 Piece (MOQ)
Torsion Testing Machine
Get Price Quote
WS-K Series Industrial Endoscope
Get Price Quote
Metal Fire Safety Equipment
1,190 Per Piece
5 Piece (MOQ)
Gold Silver Refiner, Metal Refining Equipment
Get Price Quote
We Offer Gold Silver Refiner - Metal Refining Equipment. Our latest refining equipment suitable for Gold and Silver is based on the internationally adopted method of refining precious metals and has incorporated further improvements. Our indigenous development and manufacturing facility has helped us produce excellent quality refiner with advanced features such as: a. Complete unit with Fume Cabinet and S.S. Stand b. Efficient Fume Scrubber with motorized blower c. Tank with motorized pump for re-circulation of water d. Hazardous fumes and odours neutralized through gas treatment system e. Improved filter barrel design for quick and efficient filteration f. Refines Carat gold scrap, filling, polishing, workshop sweeping dust etc g. Suitable for both gold and silver refining. Precious metal is recovered fully in powder form ready to melt. The equipment is designed to work on 440 volts three phase AC electric power. It consumes very less power. It is available in different models in capacities of 1kg to 6kg per charge. Training in operation of the equipment and refining is provided. We have detailed step by step instruction manual to help understand and operate the equipment in addition to video showing the operation of precious metal refining process. The photo shows the highest model Refiner capable to refine 6kg per charge. Overall space required for this highest capacity model is about 75” Length x 75” Width x 95” in height. Kindly ask for more details.
0.0
View Profile
Spring Load Testing Machine
45,000 Per Piece
1 Piece (MOQ)
0.0
View Profile
Nuclear Test Cast Iron Bed Plate
160,000 Per Piece
1 Piece (MOQ)
Post Free Ad
