Micro Plasma Welding Machine Dealers

• Dimension: 490 x 660 x 670 mm (W*L*H)
• Features: High performance, Minimum maintenance, Flawless design.
• Model Number: MP-50
• Power Source: Air Cooled
• Display: Digital
• Input supply: 220 VAC/50-60Hz/ 1 ph
• Duty cycle: 100 %

• Voltage: 220 V
• Weight: 33.6 kg
• Dimension: 625 x 377 x 531
• Max Output Pressure: 3.5 Bar
• Model Name/Number: Microplasma 55
• Flow Rate: 5 l/min
• Tank Capacity: 5 L
• Frequency: 50 Hz / 60 Hz
• EMC Class: A
• Insulation Class: H
• Protection Class: IP23

Micro Plasma Welding Machine has the capability to weld metal sheets of as thin as 100 microns to 3 mm. Special Features of Micro Plasma Welding Machine: IGBT inverter based with integrated HF start system Automatic Operation –  PLC Sequencer for automatic operation and integration with welding lathe / positioner / turntable / linear welding fixture etc Wide Range of Welding Thickness– The machine is capable of welding metal sheet of 100 microns to 3mm thickness Specialized Torch– A manual torch and a machine torch available for manual or mechanized operation Fully Programmable– The machine is fully programmable (with built in welding cycle timer) in the auto mode Pilot Arcing– With built-in Pilot arcing system Stable Arc– PLL based closed loop system for highly stable arc Pulsing Facility– Fully fledged pulsing facility Wave Correction Technique – Milli second square wave correction technique for fast correction of welding current irrespective of arc length or input voltage variation Digital Version – Digital version available on demand with computer interface for automatic welding with turntable / welding lathe / linear welding automation as required  

• Features: Less power consumption, Optimum performance, Reliable.

In Micro Plasma Welding, a second nozzle is used in addition to shielding gas nozzle. Through this second nozzle, plasma flows, surrounding and constricting the arc, which leads to a high power density and stability. The surrounding gas protects the melt bath of oxidation. The advantages of plasma arc welding are: - higher welding speed and less distortion as well as a higher insensitivity regarding changes in distance. Due to the stabilizing effect of the plasma it is possible to work even with low currents. This makes micro plasma welding suitable for joining very thin metal sheets.

The microplasma weld process is suitable for sheet thicknesses of above 0.1 mm (0.004"). Every TransTig 800 can be retrofitted with the PlasmaModule 10 and a PTW 500 plasma welding torch. The system configuration delivers a microplasma solution to fulfill the most stringent quality specifications on welding tasks in the 0.5 A to 80 A range. Both manual and mechanized utilization is possible.

• Country of Origin: Made in India
• Usage/Application: Industrial
• Frequency: 50 Hz
• Automation Grade: Manual
• Phases: 3 Phase
• Material: Stainless Steel
• Voltage(V): 420 V
• Cutting Thickness: 25 mm
• Working Pressure: 3.5 Bar

• Voltage: 220 Volts
• Pilot Gas Supply: Argon, 25 Psi at 0.1 to 1.0 lit/minc
• Cooling: Forced Air Cooled With Fod System
• Frequency: 50 Hz
• Class of Insulation: H Class
• Model: Klein Schweisser
• ARC Starter: Electronic High Frequency
• Phase: 3 Phase
• Power Source: IGBT Based Inverter Supply 1 phase 50 Hz
• Main ARC Open Circuit Voltage: 100 VDC. Max
• Main ARC Current: 0.5 Amp to 50 Amps. DC
• Pilot ARC Open Circuit Voltage: Less Than 100 Volts DC
• Pilot ARC Current: 1 Amp to 5 Amps. DC

Plasma Welding Machine is IGBT based inverter power supply which saves power consumption. Manufactured in advanced inverter design system which delivers continuously adjustable constant current output. provides you stable arc at as low as 0.5 Amps. High open circuit voltage for best arc striking and for best quality welding. Electronic pilot arc system gives soft start and reliable arc striking. Power consumption is very low below 0.1 V & no load. Stepless setting for pilot arc & main arc current. current setting features available for Local or remote arc . Front panel digital display show the actual welding current as well as pilot arc current.

• Voltage: 220-240V
• Automation Grade: Semi-Automatic
• Phase: Three Phase
• Frequency: 50-60Hz
• Material: Mild Steel
• Output Current: 0-100 A
• Features: High performance, Robust construction, Easy to operate.

We have hired a team of professionals who hold immense knowledge of packaging. They make use of premium packaging material so as to make damage free deliveries. We have massive and well-organized warehouse, divided into specific areas in order to automate inbound, outbound and in-stock operations, due to which we are capable of making quick deliveries in the less time.

micro plasma welding machine, cnc cutting machines, Welding Accessories

micro plasma welding machines, air plasma welding machine, air plasma torch

micro plasma welding machines, Air Plasma Cutting Machines

micro plasma welding machine, Arc Welding Table With Positioner

micro plasma welding machines, Automatic Spm Welding Machine

micro plasma welding machines

micro plasma welding machine, drawn arc weld studs

micro plasma welding machine, Welding Machine, Ferrous Metal

micro plasma welding machine