Microcontroller Boards Dealers

• Processor: EEPROM
• Brand Name: 8051 MICROCONTROLLER
• Memory: 11MHz
• No. Of Cores: 1
• USB 2.0 Ports: 2
• Bluetooth: 4
• Model Name: 8051
• Minimum Line Spacing: 1

• Power Source: Electric
• Application: Electronic, Electrical Use
• Type: Microcontroller Boards
• Packaging Type: Box

• Country of Origin: India
• Warranty: 1 Year
• Thickness: 1.6mm

• Current: 2 Amp.
• Min. Line Spacing: 0.1mm
• Min. Hole Size: 1mm
• Board Type: Single Sided

• Size: 10x5inch, 13x6inch
• Thickness: 0-50mm, 100-150Gmm
• Feature: Anti-Curl, Antistatic, Moisture Proof
• Coating: Coated
• Coating Side: Double Sided, Single Sided
• Country of Origin: India
• Brand Name: MSLR GLOBAL EXPORTS

• Brand Name: Eaton
• Material: Ceramic, Plastic
• Color: Green
• Application: Industrial
• Warranty: 1 Year
• Country of Origin: India
• Phase Type: Single Phase

• Size: 7x5x1.5
• Brand Name: LBD Robotics Pvt. Ltd.
• Color: Blue
• Voltage: 5V

It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.Digital I/O Pins 14 (of which 6 provide PWM output).Analog Input Pins 6.DC Current per I/O Pin 40 mA.DC Current for 3.3V Pin 50 mA.Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader.SRAM 2 KB (ATmega328).EEPROM 1 KB (ATmega328).Clock Speed 16 MHz.

we have provided solutions using rpi ,arduino,bb and custom embedded boards like avr,microchip etc.we can provide solution using verious wireless technologies like lora,bluetooth,xbeee,wifi ,rf etc.   would like hear from you the requirement and we will provide you a solution..

• Brand Name: VSOFT
• Packaging Type: Wooden Box
• Weight: 1 Kg
• Surface Finishing: Wooden
• Phase: Single

• Brand Name: INSIGNIA LABS
• Voltage: 12V
• Color: Green
• Model Number: IL101
• Design: Standard
• Dimensions: 10cm x 8cm
• Microcontroller: AT89S52
• Frequency: 11.0592MHz
• Minimum Order Quantity: 10 Piece

• Operating Temperature: - 40 Degree C
• Height: 1.25 mm (Min)
• Length: 4.9 mm
• Width: 3.9 mm
• Memory Size: 2 kbit
• Interface Type: Serial, 2-Wire, I2C
• Access Time: 900 ns
• Maximum Clock Frequency: 400 kHz
• Supply Maximum Current: 5 mA
• Supply Minimum Voltage: 2.5 V
• Supply Maximum Voltage: 5.5 V
• Unit Weight: 540 mg

• FEATURES: RS232 Tx, Rx interface with MAX232 IC on socket DIL40 ZIF Socket ( Zero Insertion Force) microcontroller socket - To Reduce Microcontroller Damages ULN 2803 To Drive Stepper Motor&Relays Quartz crystall 11.0592Mhz Reset button Etc.

With this board you can develop and prototype with any of 8051 40 pin microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware. The board have User buttons and status LEDs. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.

We are offering mini (arduino) microcontroller board. With the 328.(datasheet), intended for use on breadboards and when space is at a premium. It has 14 digital inputoutput pins (of which 6 can be used as pwm outputs), 8 analog inputs, and a 16 mhz crystal oscillator. It can be programmed with the usb serial adapter or other usb or rs232 to ttl serial adapter. The new mini (revision 05) has a new package for the atmega328, which enables all components to be on the top of the board. It also has an onboard reset button. The new version has the same pin configuration as revision 04. Warning: don't power the arduino mini with more than 9 volts, or plug the power in backwards: you'll probably kill it.

• Feature: Orignal and Brand new product Especially designed for Arduino beginners

The Arduino Uno is a microcontroller board based on the ATmega328 ."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. It has 14 digital inputoutput pins , 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2Atmega8U2 up to version R2) programmed as a USB-to-serial converter. This is your first step towards interfacing the lcd and keypad with your arduino

Arduino Uno is a microcontroller board based on the ATmega328P (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button.

• Type: Microcontroller
• Application: Electrical Devices
• Color: Black, Green
• Power Source: Electric
• Warranty: 1yr, 2yrs
• Data RAM Size: 128 GB
• Interface Type: I2C,SPI,SSP
• Maximum Clock Frequency: 20 MHz

The LilyPad Iduino can be programmed with the Arduino software . *Note*, the LilyPad Arduino should only be programmed with software versions 0010 or higher. You can program it with earlier versions, but all of the time related functions will be off (twice as slow as they should be). The ATmega168V or ATmega328V on the LilyPad comes preburned with that allows you to upload new code to it with the Arduino software. You can also bypass the bootloader and program the ATmega through the ICSP (In-Circuit Serial Programming) header. FEATURE Microcontroller ATmega328V Operating Voltage 2.7-5.5 V Input Voltage 2.7-5.5 V Digital IO Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per IO Pin 40 mA Flash Memory 16 KB (of which 2 KB used by boot loader) SRAM 1 KB EEPROM 512 bytes Clock Speed 8 MHz

• Brand Name: SWA
• Power Supply: 12 VDC
• Packaging Type: Box
• RAM: 512 MB
• DC Current per IO Pin: 40 mA
• Analog Input Pins: 16
•  :  

• DC Current per I/O Pin: 40 mA
• Analog Input Pins: 8
• Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader
• SRAM: 1 KB (ATmega168) or 2 KB (ATmega328)
• EEPROM: 512 bytes (ATmega168) or 1 KB (ATmega328)
• Clock Speed: 16 MHz
• Dimensions: 0.73" x 1.70" inch
• Operating Voltage (logic level): 5 V
• Input Voltage (recommended): 7-12 V
• Digital I/O Pins: 14 (of which 6 provide PWM output)

• Product Code: 10401
• Product Name: MCS51 PROGRAMMER

ILPMCSPRO is a Device Programmer Board for Programming the flash memory of major Atmel 89 Series Microcontrollers, Ideally suited for Project Deployment .Simple to use & low cost, yet powerful flash microcontroller programmer for the Atmel 89 series. It will Program, Read and Verify Code Data, Write Lock Bits, Erase and Blank Check. All fuse and lock bits are programmable. This programmer has intelligent onboard firmware and connects to the serial port. It can be used with any type of computer and requires no special hardware. All that is needed is a serial communication port which all computers have. The programmer connects to a host computer using a standard RS232 serial port. All the programming 'intelligence' is built into the programmer so you do not need any special hardware to run it. Programmer comes with window based software for easy programming of the devices Features• Supports major Atmel 89 series devices • Auto Identify connected hardware and devices • Built -  in Error checking , verification and Lock facilities• 20 and 40 pin ZIF socket on-board • Programming in auto mode.• On-Board RS232 Port for direct connection to PC's Serial Port• Hex file can be downloaded easily with the help of a user-friendly JetFlashex  Software List of Supported Microcontrollers • AT89C51, AT89LV51, AT89C52, AT89LV52, AT89C55• AT89LV55,  AT89S51,  AT89LS51,  AT89S52,  AT89LS52 • AT89S53,  AT89LS53,  AT89S8252,  AT89LS8252,  AT89C1051 • AT89C2051,  AT89C4051JetFlasheX• Programs Intel Hex files. • Straightforward and intuitive user interface • Requires RS-232 port of PC for operation• Three simple steps to program the flash device.  System Requirements• Windows 95/98/ME/NT/2000/XP • RS-232 Port • 16MB RAM • 3MB Disk Space

• Material: Aluminium
• Power Source: Electric
• Voltage: 110 V, 220V, 280V, 380V
• Color: Green , Yellow , Blue
• Condition: New , Old
• Thickness: 0-1 Mm , 1-2 mm

8051 CPU operating @ 10/12 MHz. 8K user RAM with Battery Backup, 16K bytes monitor EPROM Peripherals like 2x 8255 brought, 8253,8251, RS-232 interface 25 Keys Hexadecimal Keyboard and 6 digit 7-segment display using 8279 In-Built Power Supply of +5V/1.5A, ±12V/250mA

• Analog Input Pins: 12
• Clock Speed: 16 MHz
• Microcontroller: ATmega32u4 (SMD)
• Operating Voltage: 5V
• Input Voltage (recommended): 7-12V
• Input Voltage (limit): 6-20V
• Digital I/O Pins: 20
• PWM Digital I/O Pins: 7
• DC Current per I/O Pin: 40mA
• DC Current for 3.3V Pin: 50mA
• Flash Memory: 32KB (ATmega32u4) of which 4KB used by bootloader
• SRAM: 2.5KB (ATmega32u4)
• EEPROM: 1KB (ATmega32u4)
• Length: 68.6 mm
• Width: 53.3 mm
• Weight: 20 g

• Operating Voltage: 5v
• Input Voltage: 7v -12v.
• Color: Green
• Microcontroller: atmega328
• Digital io pins: 14 (of which 6 provide pwm output)
• Analog input pin: 6

we are offering areduino usb + atmega 328. areduino usb + atmega 328 board is a microcontroller board based on the atmega328. it connects to the computer with a standard usb cable and contains everything else you need to program and use the board. areduino usb + atmega 328  has 14 digital inputoutput pins (of which 6 can be used as pwm outputs), 6 analog inputs, a 16 mhz crystal oscillator, a usb connection, a power jack, an icsp header, and a reset button. areduino usb + atmega 328  contains everything needed to support the microcontroller; simply connect it to a computer with a usb cable or power it with a ac to dc adapter or battery to get started.Detail : comes with an atmega328 with a pre loaded arduino boot loader auto reset feature. pin13 onboard led, with current limiter resistor tx and rx onboard led serial pins : pin 0 and pin 1 can be used to receive (rx) and transmit (tx) ttl serial data pwm output : pins 3, 5, 6, 9, 10, and 11 can provide 8-bit pwm output external interrupts : pins 2 and 3 can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value 32 kbytes flash program memory 1 kbytes eeprom

• Features: Low-cost Linux computer with tremendous expansibility,Opportunity to learn many programming aspects from educators on-line,Openness and flexibility tear-down limits on your imagination

• Features: High performance, Need no maintenance , Excellent design , Easy to install.
• Pay Mode Terms: L/C (Letter of Credit)

• Brand Name: CoiNel
• Board Dimensions: 220 x 154 mm
• Item Code: A7-2148ART
• Model: LPC2147 ARTIST
• Sand Desk: Green
• Clock Frequency: 12 MHz

The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole Arduino family.   Arduino/Genuino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your UNO without worring too much about doing something wrong, worst case scenario you can replace the chip easily at a reasonable price and start over again.