Microcontroller Development Board Dealers

• Brand Name: INSIGNIA LABS
• Voltage: 12V
• Color: Green
• Model Number: IL101
• Design: Standard
• Dimensions: 10cm x 8cm
• Microcontroller: AT89S52
• Frequency: 11.0592MHz
• Minimum Order Quantity: 10 Piece

• Brand Name: VSOFT
• Packaging Type: Wooden Box
• Weight: 1 Kg
• Surface Finishing: Wooden
• Phase: Single

This is basic 40 pin AVR development board with ZIF(Zero Insertion Force) socket for easy inserting and removing microcontroller from board. If you are starting with AVR microcontroller than this board is perfect for programming AVR microcontroller as well as for designing and testing AVR based projects.The board has onboard ATmega32 MCU(32K Flash Memory).The board is compatible with the ATmega16,ATmega32 and 40 Pin AVR microcontrollers.

• Current: 2 Amp.
• Min. Line Spacing: 0.1mm
• Min. Hole Size: 1mm
• Board Type: Single Sided

This is the new 28PIN AVR's ATMEGA328P Development Board . In addition to all the features of the previous board, the AVR Development Board now uses an ATmega328 (32 KFlash Memory) which can be programmed through any AVR programming software

Avr development board v1.0 integrates atmega32a microcontroller which uses risc core. Atmega32a is low-power cmos 8-bit microcontroller based on avr family of microcontroller. This board specially designed for beginners by keeping hardware complexity as minimum as possible and its a real value for money.

We are offering avr development board.best suited for the avr based robotics project features: high power avr atmega 16 development board. can be used with atmega 16 microcontroller. on board voltage regulator with filters and operating voltage from 6v - 12v. 16mhz crystal oscillator for maximum speed. interfaced leds. red led as a power indicator. 4 switches including reset. power on/off push button switch. in built motor driving circuitry (4 dc / 2 stepper motor). motor on/off push button switch. on board lcd connector. lcd brightness control variable resistor all pins accessible through male header pins. 5v dc power output male header pins for circuit enhancement.

• Weight: 1Kg

The AVR ATmega32 Development Board can be used to evaluate and demonstrate the capabilities of AVR ATmega32 microcontroller. The MCU socket on board provides support for 40 pin DIP package of AVR ATmega32 controller. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. It is a fantastic tool for code debugging, development and prototyping. The all new board design have made it much more user-friendly than its predecessors, ideally suitable for training and development purposes. The components used in this board are of high quality and the PCB is high quality two layer PTH PCB, which makes this board especially durable. When you start using the AVR ATmega32 Development Board you will find it to be one of the best development tool available for AVR ATmega32 controller. Here below you will find the key features of this product.

• FEATURES: RS232 Tx, Rx interface with MAX232 IC on socket DIL40 ZIF Socket ( Zero Insertion Force) microcontroller socket - To Reduce Microcontroller Damages ULN 2803 To Drive Stepper Motor&Relays Quartz crystall 11.0592Mhz Reset button Etc.

With this board you can develop and prototype with any of 8051 40 pin microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware. The board have User buttons and status LEDs. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.

• Dimensions: 35 x 26 x 8 (LxWxH) mm.
• Weight: 10 gm.
• Features: 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0),1 analog
• Board Color: Blue

ARM 2129 Development Board ARM 2148 Development Board PIC16F877A Development Board PIC16F628A Development Board PIC16F628A Development Board

The Avr Development Board Has Everything One Needs to Get Started with the Atmel Avr Microcontrollers. the Avr Development Board Has a Rich Set of Hardware and Software Applications Making It Easy for Anyone to Develop Embedded Systems. the Handy Manual Provided Offers a Complete Set of Schematics and Software for the Avr Development Board. Many Real World Applications Can Be Tested On the Board. available in Size 802*604 details atmeg8535 technical Specifications 40-pin Socket (mcu), 4x3 Matrix Keypad, Serial Eeprom (spi, I2c), 2x16 Character Lcd, Ds1307 Rtc with Battery Backup, Uart(rs232, Serial Communication), Pwm Output, 3 Nos. Interrupts, Reset Button, 8kflash – Program Memory, 1mhz Inbuilt Crystal, 32.768 Khz for Timers uses automotive/industrial Application, Any Electronic Companies

Nvis 5003 AVR Microcontroller Development Platform is a full featured development system for AVR ATMEGA8515 microcontroller. It is an ideal platform to implement and test the designs both for the beginners and the experts. The Nvis 5003 is a convenient way to teach the principles of the family of microcontrollers through to programming and interfacing on the ATMEGA8515 device.

• Multiplexed Display: 7Seg

A general purpose 40 pin avr development board with on board power supply circuit, RS232 port for serial interface with computer and other serial devices, reset switch, power status LED and a general purpose switch and LED.The bridge rectifier allows this board to be powered with both AC and DC power supply adapters.

Embedded Systems Programming can be learnt by doing hands on programming. For this you will need a board. KSET Embedded Systems Development Board has been designed with this goal in mind. Using this board you can learn Embedded Systems and RTOS concepts through actual programs. Many useful programs have been included with the tools CDROM. All programs can be developed in "C" language (or assembly language).

Package Includes·         Fully Assembled and Tested Development Board with LPC1114 Microcontroller·         Serial Port Cable for PC interfacing and programming·          CDROM containing Flash Magic – Programming Software and User ManualIntroductionInterLogicx ILXLPC1114 is a development board for NXP LPC1114 microcontroller. The ILXLPC1114 board supports on board ISP Circuit for programming Flash memory via the board’s RS232 port eliminating the need for separate device programmer. On-board switch toggles between programming and code execution modes. All the microcontroller’s I/O ports are accessible via standard external headers for easy interfacing of external devices.Features·          Easy programming of the flash memory with a serial port of a computer. ·         Toggling between programming/execution modes with a single switch eliminating the need for any complex changes in the hardware. ·         Output Headers provide access to all port pins for easy interfacing to external devices ·         Target embedded microcontroller LPC1114 is supplied with kit.·          On-Board RS232 Port for direct connection to PC’s Serial Port·          Hex file can be downloaded easily with the help of a user-friendly Flash Magic SoftwareSpecifications·         ARM Cortex-M0 processor, running at frequencies of up to 50 MHz·         32KByte on-chip Flash ROM with In-System Programming (ISP) and ·         In-Application Programming (IAP) via 12KByte On-Chip Boot loader, 4KByte SRAM,·         Nested Vectored Interrupt Controller,  1 SSP controller·         UART with full Modem Interface and RS485 Support·         Fast Mode I2C-Bus, 4 Timers with 4 capture channels and 13 output channels·         Watchdog (WDT), System tick timer, 10-bit ADC with 8 channels, 42 GPIO, Serial Wire Debug/Trace port.        Applications •   Access control•   Point-of-sale•   Communication gateway•   Embedded soft modem•   General purpose applicationsPrograms Intel Hex files •   Straightforward and intuitive user interface •   Requires RS-232 port of PC for operation•   Five simple steps to program the flash deviceSystem Requirements•   Windows XP /7•   RS-232 Port •   16MB RAM •   3MB Disk Space

AVR 40 Pin development Board is ideal for for learning AVR microcontrollers. This board contains requirements like LEDs, Switches, in system programming, RS232 communication, etc . All Ports of controller are accessible though standard 10 pin FRC connector or simple header pins. Also 34*11 general purpose area of normal grid is provided for extra development on the same board. This board supports many 40 pin controllers which have identical pin configurations like AT90S8535, ATMega16, ATMeg32 etc.

• DC Power Supply Connector: 12 V Ac or Dc
• Features: AVR Development Board for Atmel AVR series. ISP Socket for Flashing thru AVR Dude and AVR Prog. On board Regulated Power Supply 5v, 12v supply’s. Easy to test with Burg Connectors wires. An RS232 Serial Port.

Piggy Bag Modules compatible of XILINX 9572 CPLD , 95108 CPLD, SPARTAN XC3S50, XC3S400, SPARTAN6, Altera Cyclone2 FPGA. 16 Toggle Input Switch and 16 output with LED indication Onboard 4 Digit Seven Segment display,16x1 LCD and 4x4 Matrix Keyboard On-board ISP Programmer for Piggy Bag Modules Clock generator generating 10MHz, 5MHz, 1MHz, 100 KHz & 100 Hz. In-Built Power Supply of +5V/1.5A, ±12V/250mA

• Model Number: AW128V1

• MCU :: PIC16F877A
• Crystal Frequency :: 4 MHz
• DC Power Supplies :: +12V, -12V, +5V & -5V
• Power Supply :: 110V - 260V AC, 50/60Hz
• Operating Conditions :: 0-40 C, 85% RH
• Communication :: USB Port
• Test Points :: 41 nos (Gold plated)

Nvis 5002 PIC Microcontroller Development Platform is a full featured development platform for microchip PIC16F877A microcontroller. It is an ideal platform to implement and test the designs both for the beginners and the experts. Nvis 5002 is a single microcontroller development platform. The Nvis 5002 PIC Microcontroller Development Platform is a convenient way to teach the principles of the family of microcontrollers through to programming and interfacing on the 16 series device. Using the platform, a range of projects in various domains like telecommunication, robotics, consumer electronics etc can be done. The Nvis 5002 gives designers a quick start to develop code on the controller with on platform programmer and on platform breadboard facility. The flexibility of connectors allows the user to make external connections. On platform, breadboard allows making their own circuits and performing an experiment as they desire.

DEVELOPMENT BOARD FOR 20 PIN AVR MICROCONTROLLER WITH STKXXX COMPATIBLE 10 PIN ICSP FEATURES ICSP 5x2 pin connector for in-circuit programming with AVR-PG1 or AVR-PG2 DIL20 microcontroller socket status LED connected to PB4 reset IC ZM33064 Quartz crystal oscillator circuit 10MHz Voltage regulator +5V, 7805 and filtering capacitors Power plug-in jack RS232 DB9 female connector , simple level shifter with transistors and diodes 4 opto-coupler isolated inputs with screw terminals input status LEDs 4 relay outputs with 5A/250VAC contacts with screw terminals output status LEDs four mounting holes 3.3 mm (0.13") FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print dimensions 80x100 mm (3.9 x 3.15")

• Brand Name: Advance Tech
• Board Thickness: 1 mm
• Min Line Spacing: 0.020 cm
• Min Line Width: 0.016 mm

• Voltage: 5 V
• External Power Supply Range: 7 V to 20 V
• Layout: Professional Glass PCB Layout
• Boards Support: AVR ATMEGA16, ATMEGA32, ATMEGA8535 Microcontrollers
• Display Type: Two Line LCD Display (2x16), Two multiplexed 7-Segment LED Display

Avr Development Board, USB to Serial UART Interface, USB 2.0 Serial Converter

microcontroller development boards, Electronic Products, mechanical drives

microcontroller development boards, Industrial Digital Counter

AVR ATMEGA8 Microcontroller Development Board, Isolation Amplifier

Being a quality driven firm, we source the raw material from the certified vendors only who assure us for the quality and reliability of the material. Noteworthy Supplier of ARM7 Microcontroller Development Board, we are customers' favored option in this domain. The ARM7 Microcontroller Development Board is largely appreciated for its high-efficiency and performance.