Microhardness Tester Dealers

• Switch Type of Objective lens and Indenter: Manual Turret
• Testing Force: 10 g, 25 g, 50 g, 100 g, 200 g, 300 g, 500 g, 1000 g
• Scale: HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2
• Min. Measuring Unit: 0.25 μm
• Hardness Value Rang: 1 HV - 4000 HV
• Hardness Value of Reading: Digital LCD Screen
• Total Magnification of Microscope: 100X For Observation 400X (For Measurement)
• Loading Method: Automatically Load, dwell and unload the testing force
• Dwell time: 1-99s
• Specimen Allowing Maximum Height: 85 mm
• Throat Depth: 120 mm
• Instrument size: 490 × 185 × 515 mm L × W × H
• Instrument weight: 45kg
• Light Source: LED Cold light source (can be continuous use for 24 hours, life 100,000 hours) Power Supply: 110V/22
• X-Y Testing Table: Dim.:100×100 mm
• Max. Travel Range: 25×25mm Moving Resolution Ratio 0.01mm (X-Y Digital Testing Table with digital LCD Screen for Option
• Data Output: Built-in Printer Hardness Value, The Max. And Min. Value, Testing times and Average Value) Built-in
• Executed Standard: GB / T4340.2 Chinese Standard, JJG151 Inspection Rules

‘Vaiseshika’ Economical Micro Hardness Tester also referred as Vickers Hardness Tester, Type: 7005 A is precision hardness testing machines which integrate the technology of optics, mechanics. Hardness is a characteristic of a material and is determined by measuring the permanent depth of the indentation. More simply, when using a fixed force (load) with indenter, the smaller the indentation, the harder the material. Hardness value is obtained by measuring the depth or area of indentation.  

It has a more faster testing speed than other ordinary Vickers hardness tester. The hardness value can be displayed directly and not need to enter the length of the diagonal. And the HVD-1000AP is famous as its fashion and decent design, high testing precision, stable functions and simple operation.   Main Uses:: Testing the hardness of metallographic structure, from the most soft material to the most hard material. Carburizing, nitriding, hardened layer, surface coating, steel, nonferrous metals. The hardness of the glass, ceramic materials.   FEATURES :: With Vickers hardness and Knoop hardness testing capabilities, and testing force can be extended to 2KG. The testing data able to be printed directly by the built-in printer. Can be connected with computer, used the image analysis software to analyzing the physical and chemical properties of the material. Testing method, testing power and duration time can be displayed directly on the LCD screen. The hardness value can be displayed directly by entering the indentation diagonal length. According to different visual habits of the operators, the strength of the light source can be adjusted. To avoid the visual fatigue for long time operation The independent research and development of lifting system and positioning system, ensured the accuracy and repeatedly of the testing process. The optical system designed by senior optical engineer (who worked in the Shanghai Optics And Fine Mechanics Institute, Chinese Academy of Science) not only meet the definition of hardness testing requirements, but also can observe the microstructure of the material. Reserved image channelï¼�can be connected with computer, used the image analysis software to analyzing the physical and chemical properties of the material.

• Type: Monocular
• Weight: 5-10kg
• Voltage: 220V
• Driven Type: Electricity
• Warranty: 1 Year
• Eyepieces: WF10X, WF15X
• Application: Science Lab
• Feature: Actual View Quality, Contemporary Styling, Easy To Use
• Objective: M10x, M40x

Digital Display Micro Hardness Tester (VHS-1000A) The objective lens and indenter can be shift automatically after finished focus. Loading, dwell and unloading the test force automatically. And the objective lens returns to initial focus status, measuring directly. Greatly improved the working efficiency. Micro Hardness Tester Digital Display Micro Hardness Tester (VHS-1000A) VHS-1000 A/B   Digital Display Micro Hardness Tester (VHS-1000B) The VHS-1000B model products have all the features and functions of the ordinary micro hardness testers. Its operator interfaces adopt the embedded LCD display screen, and all the testing data can be display on the real time. A comprehensive analysis of the material can be provided to the operators for a reference. And it’s famous as its fashion and decent design, high testing precision, stable functions and simple operation.   Main Function & Features • Operational panel is concise and clear with menu structure with English. • The hardness values, diagonal length, dwell time, testing frequency, environmental temperature, the maximum minimum value of test, average value and repeatability can be displayed directly. • The independent research and development of lifting system and positioning system, ensured the accuracy and repeatedly of the testing process. • According to different visual habits of the operators, the strength of the light source can be adjusted. To avoid the visual fatigue for long time operation. • The testing data able to be printed directly by the built-in printer. Reserved image channel can be connected with computer, used the image analysis software to analysing the physical and chemical properties of the material.

• Brand Name: HELMUT FISCHER
• Hardness measurement range: 0.001 –- 120,000 N/mm2
• Test load range: 0.1 – 2000 mN
• Load resolution: ≤ 40 μN
• Distance resolution: ≤ 100 pm
• Approach speed of the indenter: ≤ 2 μm/sec
• Maximum indentation depth: 150 μm

We offer fischer micro hardness measurement systems. Fischer micro-hardness measurement systems fischerscopeâ® hm2000 and picodentor® hm500 utilize the load indentation depth method according to iso 14577-1. with this method, the indenter â�� typically a vickers or berkovich pyramid â�� is essentially continuously pressed into the material tested with an increasing test load, and then unloaded. â�¢ maximum test load: 2000 mn â�¢ maximum indentation depth: 150 î¼m â�¢ load resolution: â�¤ 40 âµn â�¢ distance resolution: â�¤ 100 pm â�¢ approach speed of the indenter: â�¤ 2 î¼ms measurable characteristic material quantities computed according to iso 14577-1: â�¢ martens hardness hm â�¢ indentation hardness hit (convertible to hv) â�¢ modulus of indentation eit â�¢ indentation creep cit â�¢ percent elastic portion å�it of the indentation work welast wtotal. â�¢ additional characteristic material quantities according to the standard. â�¢ quantities such as martens hardness at a certain test load, portion of plastic deformation etc. ��¢ characteristic quantities computed from the measurement plot according to the previous din 50359.

• Brand Name: FIE
• Country of Origin: India
• Model Number: MV 1 - TS

Touchscreen Display. Small loads allow testing of thin sheet metals. Latest GUI features with user friendly software. Motorised loading & unloading cycle. Load Selection by external knob.

We are offering micro hardness tester -testing force : 1 kg capacity / 2 kg capacity -loading control : automatic (loading, dwell, unloading).

Being one of the leading Exporters and Suppliers, we are engaged in providing Computerized Micro Vickers Hardness Tester Computerised Micro-Vickers Hardness Tester automatically measures the diamond indentation. Computerised Micro-Vickers Hardness Testers are accurate in measurement; and are demanded across the national and international markets.Features High performance Minimal maintenance Longer service life Specifications Grade : IS:1754:2002 and ISO 6507-2:1997 Manimum Pentium II with 64 mb ram Window : 98/98SE

We are offering micro hardness tester. The instrument comprises of a microscope alongwith a filar micrometer eye piece of 10x and objective of 40x. The instrument is mounted on a stand having loading and unloading mechanism attached to the microscope. A standard weight of 10 gms to 200 gms is loaded on the indentor assembly. An indentation, with the help of a diamond indentor, is caused on the material of the surface (whose hardness is to be measured). The system employs a high precision rotating specimen table (fitted with micro meter screw gauges) to turn the sample under the microscope along x and y axis.

• Display Type: Digital
• Automation Grade: Automatic
• Voltage: 220 V
• Parameter: HV
• Model Name/Number: MMT-X2T
• Dimension: 540x260x650 mm
• Weight: 50 kg
• Test Force: 10-1000 g
• Objective: 10 X

• capacity: 2000gms

Everone Digital Micro Hardness Tester Test Load 10 gms to 2000gms Electronic Auto D1D2 for measurement Indenter safeguard cover Direct Load mechanism High Speed auto turret mechanism Five position turret system.

We are offering micro hardness tester. All types

• Test Loads: 10, 20, 50, 100, 200, 300, 500 gf
• Maximum Test Height: 30 mm with clamping vice,50 mm without clamping vice
• Sample Stage (XY stage) with micrometer heads of 0.01 LC: 10mm movement in each axis
• Clamping vice capacity: 40mm max.
• Scale least count: 0.0001 mm
• Machine dimension: L 450 X W 275 X H 535 mm (Aprox)
• Weight (approx.): 48 kgs
• Measuring Range: 0.01 to 0.2 mm
• Vickers Diamond Indentor 136 pyramid: 1 No.
• Standard Test Block: 1 No.
• Spanners: 1 Set
• Supply Cord: 1 No.
• PC interface cable: 1 No.
• Video Capture Card: 1 No.
• Microvicksys Software CD: 1 No.
• Instruction Manual: 1 No.

The Vickers hardness test method, also referred to as a micro hardness test method, is mostly used for small parts, thin sections, or case depth work. The Vickers method is based on an optical measurement system. 

• Test Load: 1.0Kgf(9.8N)、5.0Kgf(49.0N)、10Kgf(98.0N)、20Kgf(196N)、30Kgf(294N)、50Kgf(490N)
• Hardness measuring range: 8

Micro Vickers Hardness Tester with large screen LCD display, use the menu interface type structure, can be in operation panel choose hardness HV or rod HK, test of hardness value, automatic input, automatic display. For all kinds of hardness value mutual conversion, and the testing result is automatic storage, processing, printing. With RS-232 interface, and computer online. This machine is digital, high degree of automation. Hardness value error can be modified through software input; hardness value more accurate meets the requirement,Economet VH-50 MD Digital Automatic Turret Micro Vickers Hardness Tester with digital display when the pressure head and the objective to switch to each other, the test point to be automatic positioning precision.

• Display Type: Digital
• Brand Name: Conation
• Warranty: 1 Year
• Voltage: 230 V
• Test Force: 10-1000 gf
• Load Capacity: 5 gm,2 Kg,3 Kg,5 Kg
• Automation Grade: Semi-automatic
• Dwell Time: 5 - 95 Seconds