Moisture Instruments Dealers

• Brand Name: Supreme Interantioanal
• Warranty: One Year
• Country of Origin: India

Our AIR QUALITY MONITOR systems are designed to provide accurate and reliable data on air pollution levels, helping to protect the health of individuals and the environment. With sensors that detect a range of harmful pollutants, our monitors are equipped to measure ground-level ozone, carbon monoxide, sulphur dioxide, nitrogen dioxide, and airborne particles. This information is displayed on an LED board or TV screen with customizable color schemes, making it easy to interpret and act upon. Our monitors also offer various connectivity options, including Wi-Fi and GSM, ensuring seamless integration into existing systems. Trust SUPREME to deliver real-time air quality monitoring solutions that prioritize health and safety. Supreme Air Quality monitors are installed with different sensors to detect the presence of PM 10 and PM 2.5, SO2. NO2, O3, H2S, CO etc., the readings can be displayed on an LED board/ TV scheme, with a colour scheme that can be customised as per requirement. Our Monitors ace the domain of connectivity as they come with a wide range of connectivity options, including Wi-Fi, GSM etc. Protecting people from the harmful effects of air pollution starts with reliable, actionable air quality data. At SUPREME, we design and deliver integrated real-time air quality monitoring systems. Built on sensor technology, our air monitoring systems make it easy to measure air quality, without any hassle. Air quality is a measure of how clean or polluted the air is. Monitoring air quality is important because polluted air can be bad for our health—and the health of the environment. AQI tracks five major air pollutants: Ground-level ozone Carbon monoxide Sulphur dioxide Nitrogen dioxide Airborne particles, or aerosols Ground-level ozone and airborne particles are the two air pollutants that pose the greatest risk to human health. They are also the two of the main ingredients in smog, a type of air pollution that reduces visibility. Air quality is measured with the Air Quality Index or AQI. The AQI works like a thermometer that runs from 0 to 500 degrees. AQI is a way of showing changes in the amount of pollution in the air. We create customized instruments and provide air quality solutions as per the requirements of our clients. Supreme Air Quality monitors are installed with different sensors to detect the presence of PM 10 and PM 2.5, SO2. NO2, O3, H2S, CO etc., the readings can be displayed on an LED board/ TV scheme, with a colour scheme that can be customised as per requirement. Our Monitors ace the domain of connectivity as they come with a wide range of connectivity options, including Wi-Fi, GSM etc.Contact us for export and PAN india based suppliers. Footprints in states like Delhi, Rajasthan, Maharashtra, Karnatka, Tamil Nadu, West Bengal, Andhra Pradesh, Haryana, U.P.

• Certification: ISI Certified
• Application: Industrial Use
• Usage/Application: Soil Moisture Test
• Automation Grade: Manual
• Operating Temperature: 0-40 Degree Celsius
• Display Type: Manual
• Warranty: 1 Year
• Packaging Type: Wooden Box
• Pressure Gauge: 0-25
• Number of Steel Balls: 10
• Packing Type: Wooden Box
• Steel Ball Size: 5mm Dia.

• Type: Infrared Moisture Balance, Infrared
• Certification: CE Certified
• Application: Industrial, Laboratory
• Voltage: 220V, 230V
• Frequency: 50 Hz
• Power: Electric
• Country of Origin: India
• Measuring Range: 5 to 25 gm
• Warranty: 1 Year

Infrared moisture balance with digital temp. indicator with PT 100 "L" type S.S. Thermocouple & 99 min. Digital timer with buzzer & auto supply cut off facility.

• Brand Name: Applied Techno Systems
• Application: Industrial
• Material: ABS Plasitcs
• Color: Black
• Weight: 600 Gram
• Operating Temperature: 0-50 Degree Celsius
• Accuracy: +-1%
• Warranty: 1 Year
• Moisture Range: 0-23000 PPM
• Usage/Application: Dew Point Monitoring of Compressed Air/Gas
• Operating Humidity Range: 0-99.9% RH
• Battery: Lithium Rechargeable Battery
• Measuring Range: -80 to +30 Deg C
• Display Type: Graphics Display
• Analysis Time Approx: less then 30 Sec
• Dimension: 120 x 87 55 mm
• Max Resolution: 0.1 unit

• Type: Table Top
• Material: Glass, Plastic
• Shape: Rectangular
• Certification: CE Certified
• Driven Type: Battery
• Feature: Durable, Easy To Use, High Accuracy

• Brand Name: Kett
• Model Number: PM650
• Place of Origin: Japan
• Power: Battery Operated

Our company is well reckoned Supplier of Kett Moisture Meter PM-650 (Version 6501) in India. We offer Kett Moisture Meter PM-650 (Version 6501) in retail and bulk amount.   More About The Product : Kett has developed a variety of highly successful moisture meters for portable use. The PM-650 is the latest in the product line and is indispensable for the grain, seed, and coffee industries. The PM-650, version 6501 is a general-purpose instrument for worldwide use. It will measure a wide variety of applications including wheat, corn, sunflowers, hazelnuts, coffee, tea etc. Up to 150 applications may be installed.  Please note that due to printing, the product's color may appear different from the actual article.

We are one of the leading Suppliers of Moisture Measurement Meter. Flush mount, digital, microwave Moisture Measurement Meter is accurately designed following the set industrial parameters. The Hydro-Mix VII is a rugged, microwave Moisture Measurement Meter designed to be installed flush with the floor of a mixer, chute or conveyor in process control environments. Reading at 25 times per second and combined with on-board functionality such as signal processing, smoothing and averaging, the Hydro-Mix VII Moisture Measurement Meter accurately measures the moisture content of material as it passes over the ceramic faceplate. Remote configuration, calibration, diagnostics and firmware upgrades are simple using Hydronix Hydro-Com software. The linear output allows direct integration with any control system using industry standard interfaces. Features Digital technology provides precise linear moisture measurement. Advanced Digital Signal Processing provides a clear signal with rapid response. Choice of measurement modes for optimizing sensor performance in a variety of applications and material types Fully temperature compensated measurement. Two analogue outputs, digital RS485 communications and configurable digital input/outputs. Fast response to changing conditions with 25measurements per second Remote communication with Hydro-Com software allows configuration of all sensor parameters including selection of sensor outputs, graphic traces of outputs, calibration of sensor readings and firmware upgrades. Consistent performance with no need for recalibration except for use with different materials Tough and reliable with proven track record Easily replaced ceramic faceplate and protection ring Moisture Measurement In Bulk Materials ( Hydroprobe-II ) : The ultimate intelligent microwave sensor for measurement of moisture in sand and free flowing solid materials in bins Range of moisture : For bulk materials the sensor will measure up to the point of saturation typically 0-20% for construction materials Penetration : Approximately 75-100mm dependent on material Power supply : +15Vdc to +30Vdc. 3 watts max Refresh rate : Outputs are updated approximately 25 times per second Analogue output : Configurable 0-20mA or 4-20mA current loop source For 0-10Vdc output an external 500R load resistor should be connected across the analogue output at the control system Discrete inputs : The batch average start and stop or moisture/temperature multiplexing functions can be controlled via the digital inputs, Refer to 'Connecting the Cable' section of the manual for more information. Digital Communications : Up to isolated RS485 2-wire port

• range scale 2 (concrete): 4 to 14%
• sensor type: resistance probe (12.7 mm spacing)

The colour-coded analogue meter indicates high or low levels of WME % moisture content of plaster or concrete over the range of 4 to 20%. A reference scale of 1 to 10 is also included for comparison readings without reference to particular percentage moisture content.

• Type: Soil Moisture Sensor
• Material: Plastic
• Application: Automobile Use, Industrial Use
• Color: Available in Many Colors
• Warranty: 1year
• Temperature: -50-+1 Deg C
• Alarm Range: 1.5mtr

We bring forth highly advanced Soil Moisture Sensor, which is used to detect the right level of moisture in different types of soil. As an experienced Soil Moisture Sensor Manufacturer & Supplier, we make use of the latest technologies in designing and production. This is to ensure that the end-users get the most accurate results. Features Low cost Compact design Low power Durable Insensitive to salt Analogue o/p voltage proportional to moisture Wide input voltage range

• Country of Origin: India
• Type: Moisture Meter
• Certification: ISO 9001:2008
• Application: Moisture Measurement
• Automatic Grade: Automatic
• Brand Name: PBM
• Operating Temperature: 0-50 Degree

Bamboo Moisture MeterMoisture meters are used to measure the amount of water in the Bamboo so that the Bambooworker can determine if it is suitable for the intended purpose.

• Country of Origin: India
• Display Type: LCD
• Brand Name: Insize
• Weight: 206g
• Product Code: 9341-50
• Dimension: 130x56x29mm
• Power Supply: 2xAAA batteries
• Sampling Time: 1s for temperature and relative humidity

DIGITAL MOISTURE METER CODE 9341-50 Suitable for wood, smooth cement, hard gypsum, mixed mortar, brick, etc. Measure moisture, temperature and relative humidity Temperature type: ambient, dew point, wet bulb Maximum and minimum modes Automatic power off  

• Brand Name: SesnorMart.com
• Type: Volumetric Water Content
• Model No.: SMKBSMT-VWC
• Measuring Range: Temperatur e: -40℃-80℃; Moisture : 0-100%;
• Temperature Accuracy: ±0.5℃
• Moisture Accuracy: ± 3% in the 0-53% range; ± 5% in the range of 53-100%
• Power Supply: 12-24V DC
• Output Signal: RS485/0-10V/0-5V/4-20mA any one
• Response Time: <1s
• Protection Level: IP68
• Power Consumption: ≤ 0.15W(@12V DC ,25℃)

• Color: Silver
• Automatic Grade: Automatic
• Application: Laboratory Use
• Feature: Easy To Use, Electrical Porcelain, Proper Working, Superior Finish
• Type: Rapid Moisture Tester
• Country of Origin: India
• FINISHING: Coated

• Feature: Durable, Light Weight
• Display Type: Digital
• Warranty: 1Year
• Brand Name: Kett
• Model: Prg930

Measures moisture of rice flour and raw polished rice Average moisture display Features automatic temperature correction and automatic grain temperature correction

We Offer Humidity Meters. Accurate and stable readings with Testo 608 H meters

• Country of Origin: India
• Display: Digital
• Material: Plastic
• Weight: 150-200gm
• Accuracy: 0.1%
• Power: 1.5V

• Voltage: 220V
• Driven Type: Electric
• Frequency: 60 Hz
• Flow Rate: 0.7
• Battery Voltage: 12 V
• Brand: Romaina
• Material: Stainless Steel
• Usage/Application: Air Quality

• Power Source: Electric
• Warranty: 1 Year
• Application: Laboratory
• Brand Name: SHIMADZU 
• Automatic Grade: Automatic
• Model Name/Number: MOC63u
• Measuring Range: UP TO 60g
• Operating Temperature: 0-50 Degree Celsius, Upto 200 Degree C
• Accuracy: 0.01%
• Readability: 0.001g

• Brand Name: Kett
• Color: White
• Application: Moisture Meter
• Weight: 00.50
• Material: Stainless Steel
• Automation Grade: Automatic

• Type: Digital Moisture Meter
• Certification: YAS
• Weight: 2.4 oz (68 g).
• Color: Red
• Voltage: 3 V CR2032 lithium metal battery, installed functional, user replaceable.
• Application: Moisture Measurement, Moisture Measurement For Wood
• Display Type: Digital
• Automatic Grade: Manual
• Material: Plastic
• Power Source: Battery, 3 V CR2032 lithium metal battery, installed functional, user replaceable.
• Feature: Light Weight
• Warranty: 1Year
• Brand Name: DWYER USA