Motor Driven Pumps Dealers

GM type motor-driven grease pumps are designed and manufactured to meet the needs of the market and customers for various kinds of medium and small machineries. GM motor-driven grease pump's rated output pressure is 35kgf/cm². is from grease lubrication system together with 35-type pressure volume type distributor, progressive distributor or different kinds of resist-type distributors. The system is of moderate pressure,capable of increase the pressure of grease to 35kgf/cm2 and feed lubrication points of grease in precise dose or in proportion. GM series motor-driven grease pumps are suitable for plastic machinery, engineering machinery, and machinery for textile, printing, woodworking ,chemical, food, and so on, ensuring lubrication performance of various kinds of machinery products, for longer service life and accuracy. Features: 1. Utilizes three-phase 380V motor for powerful operation, easy installation and wiring. 2. Adopting special alloy steel gear pump for stable output pressure, low noise and long service life. 3. With grease level sensor for self detecting inadequate grease and alarm. 4. Point action switch for any-minute machine lubrication. 5. If the pump is equipped with pressure switch it will provide pressure signal and realize automatic control by connecting with main unit. 6. If the pump is equipped with automatic pressure take-off device, and used with our company's 3-type extra pressure volume type distributor to form a grease lubrication system with moderate pressure, it can achieve full performance of lubrication.

End suction, horizontal split case, multistage – single / multi outlet pumps with radiator cooled and heat exchanger cooled and heat exchanger cooled diesel engine.  

By following the international quality standards, we procure raw materials only from the trusted vendors. Thus, we make sure that our finished products are superior and flawless. To avoid any type of mechanical and biochemical harms, we pack our products in high-grade packing items that are sturdy as well. Moreover, we provide product details on it as well.

• Fuel Tank Capacity: 26 M3/hr to 250 M3/hr
• Head: 8 M to 26 M
• Size: 50 mm to 150 mm
• Specification: IS-6595

SPECIAL FEATURE :- Casing and Frame:Shrouded type of Close Grain cast Iron Impeller: Cast Iron enclosed type, statically balanced (S.S/Bronze Impeller at extra cost) Shaft: High tensile carbon steel Ball Bearing: Deep grooved at the driving end Low power consumption Accuracy : +-5-1 0% Rotation : anticlockwise seeing from the driving end Construction: Horizontal, Single stage, 'single suction Drive: Pumps suitable for coupling with electric motors/engines directly Specification:As per IS:6595/2002

• Engine power: 40 Hp
• Dimensions: 1600mm x 1050mm x 1150 mm
• Weight: 650 kg

The CE40 series of machines are electrically driven pumps with a pressure from 230 to 2500 Bar and from 6 to 73 L/min in flow. The frames are made from hot dip galvanized pressed sheet metal parts and stainless steel perimeter frame rails. Front castor wheel and two big pneumatic wheels with brake for easy maneuvering and stable parking. One hook lifting eye.

• Type: Chemical Dosing Pumps
• Weight: 50-100kg
• Color: Yellow
• Voltage: 415V
• Condition: New
• Automatic Grade: Semi Automatic
• Warranty: 1year
• Country of Origin: India
• Pump Power: 1 Hp
• Pump RPM: 1400
• Brand Name: KRISHNAA INDUSTRY
• Application: CHEMICAL DOSING
• Pressure: 10

Over the years, we have catered to the voluminous and urgent requirements of our clients from Haryana(India). As we have a wide distribution network, we are able to ensure our payment procedures are fast and simple. Additionally, we are capable of providing prompt payment discounts.

Motor-driven diaphragm pump  Metering accuracy is almost independent of back pressure Flow rate is linear to stroke length variation Diaphragm is always balanced between the pressure exerted by the hydraulic oil and the liquid to be dosed. Longer diaphragm life Automatic air bleeding from the hydraulic oil ensures better metering accuracy Arrangement of in-built pressure relief valve to protect the pump from pressure exceeding the rated pressure Rupture Indication Arrangement (RIA) is an additional facility available with these pumps. These pumps with RIA are provided with sandwich of two diaphragms.The rupture of any one of the diaphragms can be sensed by pressure sensing device In case of metering pumps to be used in hazardous areas the liquid head can be keptat a remote place from drive side. The head & drive are coupled by hydraulic oil in flexible tube

• Brand Name: Radial Pumps,Radial Pumps
• Material: C. I, C.S, SS-304 / 304L, SS316 / 316L, Bronze, Alloy-20, CD4MCU Hast alloy B & C, etc. Duplex stain
• Driven Type: Electric
• Certification: CE Certified, ISO 9001:2008
• Warranty: 1Year
• Country of Origin: India
• Pressure: Up to 5.5 Kg/cm2
• Model: ROP Series
• Capacity: Up to 1200 M3/hr
• Head: Up to 55 mtr
• Discharge Size: 25 mm to 300 mm
• Temperature: Up to 250°C
• Speed: Up to 3500 rpm

• Feature: Minimized weight and envelope • Mature designs in use on the world’s most active fleets

Electric motor driven pumps (EMP) for aerospace applications. Parker̢۪s ability to design and manufacture all major elements of our EMPs including, pump, motor, motor controller, and associated software, leads to a highly integrated and efficient EMP solution. EMPs use electric input from either aircraft generators or batteries. Parker motors can be designed to operate with a variety of electric-power inputs including; fixed-frequency AC, variable-frequency AC, 28VDC, 270VDC, and others. Parker motor controllers and associated software can be tailored for specific motor types and support unique power-management requirements.

DR Submersible Motor-Driven Pumps for sewage in Cast Iron   DR Pumps are particularly suitable for moving sewage, foul liquids in general, emptying seepage water, emptying cesspits, draining excavations.  Evacuation of civil and industrial waste water, moving foul waste water with filamentary substance and paper and moving foul waste water and sewage, generally foul liquids also with solid parts and filamentary substances.  DRD with multi-channel impeller, DRS with open impeller and grinder device inlet.   Technical Specifications ·         Maximum liquid temperature  :  40oC ·         Maximum size of solid handling : 140mm (DRD), 7 mm (DRS) ·         Capacity up to 1800 m3/hr  ·         Total Head up to 57m

These pumps are designed to lift water from well, sump as deep as 7.5m (6m in case of self prime). Since they are light in weight, these pumps can be lowered into the well to reduce suction. They have been built in thermal overload protector to avoid coil burnout.

• Voltage: 230 / 400 Vac 3ph 50/60Hz
• Weight: One module 48 kg (105 lb), Two modules 65 kg (143 lb)
• Connections: X (1 1/4") / Y (1 1/4"NPT)
• Power:: 1.5 Kw (2 Hp)
• Protection:: IP55 clase F

The Electrofertic dosing pumps are motor driven piston pumps for dosing, made up of a worm gear reducer and one or two injection modules of 500, 750 or 1000 liter/hour with electronic regulation by means of a frequency Inverter. The dosing flow can be regulated from 10% to 100%. It is manufactured with materials which can resist any chemical. It is designed for all sorts of processes where it is necessary to dose a product into a hydraulic network, such as food, textile, chemical industry, water treatment, etc. MATERIALS Cylinder: P.P / AISI 316 / PVDF / PTFE Diaphragm: Elastomer base reinforced with fiber and P.T.F.E clothing Piston: Ceramic / PEUHMW Sealing: FPM Valve (body): P.P / AISI 316 / PVDF / PTFE Valve (ball): glass / glass borosilicate / AISI 316

• Weight: Without oil 32.5 kg.- with oil 37.5 kg.
• Dimensions: 450 mm long x 320 mm wide x 430 mm high
• Capacity: 1st Stage 3.5 liters per minute up to 30 bar* 2nd Stage 0.35 liters per minute up to 1500 bar* * at

PES-1500-01 is a standalone electric pump that is both lightweight and portable. The pump, reservoir and motor are all combined into one easily handled package built around a steel frame with rubber feet.   The pump is fitted with a CEJN 116 coupling outlet a glycerine filled damped pressure gauge and an oil sight glass. It also features a fully functional remote control with a 5m cable.   Hytension's PES-1500-01 is well suited for use in the wind turbine industry for its relatively low weight and small size. The pump is very easy to use and maintain and is equipped with an industrial inline oil filter. It has a manually adjustable pressure relief valve for easy setting of the maximum working pressure. It is also fitted with an internal pressure safety valve.   The pump is pressurised in two states. The low pressure stage is factory set to provide a high volume oil flow for rapid piston extension and seal energising. When higher pressure is required the pump automatically switches to the high pressure, low volume mode. The high oil flow ensures the pump reaches the desired operating pressure very quickly.   Specification   Maximum Operating Pressure - 1500 bar Electric Motor Options - 200V-240V 50/60 Hz single-phase, 110V-120V 50/60Hz single-phase Protection Rating - IP54 Protected against dust - limited ingress permitted protected against water sprays from all directions -limited ingress permitted Power Rating - 0.75kw Pump Capacity - 1st Stage 3.5 liters per minute up to 30 bar*2nd Stage 0.35 liters per minute up to 1500 bar** at 50Hz (at 60Hz + 20%) Oil Reservoir - IS032, ISO46 hydraulic oil. Capacity 5 liters. Maximum Pressure Valve Manual Adjustment - 0-1500 bar Dimensions - 450 mm long x 320 mm wide x 430 mm high Weight - Without oil 32.5 kg.- with oil 37.5 kg.  

Main fire pump package motor driven set consists of following main fire pump - fm approved or ul listed motor - as per nfpa 20 ul listed motor controller - fm approved or ul listed all above equipments are mounted on a common skid flow in m3hr head type of pump model reco motor 97.2 70 hz back pull out end suction db 6526 30 kc 2 137 70 hz back pull out end suction db 8026 45 kc 2 137 80 hz back pull out end suction db 8026 45 kc 2 137 88 hz back pull out end suction db 8026 55 kc 2 137 70 hz multistage split casing dsm 10036 45 kc 4 137 80 hz multistage split casing dsm 10036 55 kc 4 137 88 hz multistage split casing dsm 10036 55 kc 4 171 70 hz back pull out end suction db 10026 55 kc 2 171 80 hz back pull out end suction db 10026 75 kc 2 171 88 hz back pull out end suction db 10026 75 kc 2 171 70 hz multistage split casing dsm 10036 55 kc 4 171 80 hz multistage split casing dsm 10036 55 kc 4 171 88 hz multistage split casing dsm 10036 75 kc 4 273 70 hz back pull out end suction db 10026 75 kc 2 273 80 hz back pull out end suction db 10026 90 kc 2 273 88 hz back pull out end suction cphm 15052 110 kc 4 410 105 hz split casing up 15030 a(n) 180 kc 2.

• Type: Motor Driven Pumps
• Material: Stainless Steel, Cast Iron
• Weight: 100kg, 200kg
• Color: Black, Grey, Light Green, Sky Blue
• Voltage: 110V, 220V, 380V
• Application: Industrial Use
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic
• Feature: Durable, Easy To Fit, Premium Quality, Rust Proof
• Warranty: 1Year, 2years