Motor Run Capacitor Dealers

• Brand Name: LEXUR

We are offering 8 mfd 440v motor run capacitor xbb60. we hold immense expertise in offering a complete range of motor start capacitors. These capacitors are designed following the rules and regulations of is 2993 under the strict supervision of our skilled experts. The mpp metalized films that we use are imported from japan (oj) film. Moreover, we make use of high-grade mpp metalized film rather than any electrical components. The capacitors find application in water pumps, induction motors and diamond motors. specifications: body type: pp & aluminum type: dry & oil range: 40-60(30 mfd) mfd to 250-300 (140 mfd) volts: 230 v lid type: wire (180 mm length).

• Type: BOX TYPE MOTOR RUN
• Voltage: 44OV
• Frequency: 25HZ
• Condition: NEW
• Color: BLACK
• Brand Name: SPICEX
• MFD: 25

  mfd : 25  mfd type - box type / flat voltage - 440v encapsulation – epoxy sealed body - flexible multi-strand copper wire conductor – high temperature resistant & highly conductive metal tags application : industrial motors replacement warranty - 1 year    key features complete range : pin type connectors (thimble), wire connectors (lead) and screw type connectors abs can provides greater mechanical strength and thermal stability needed for high temperature application epoxy sealed ensure zero atmospheric contact, increasing the capacitor lifespan 100% tested to ensure zero failures in field of operation made using highest quality raw material under strict process control to maintain quality maintains fan speed throughout the life cycle non pcb  encapsulation – environment friendly    .

• Frequency: 50/60 Hz
• Range: Upto 1.5MFD to 324MFD
• Confirms to: IS:2993 EN/IEC:60252-1 Ed. 1.0
• Capacitance Tolerance: ± 5%
• Rated Voltage: Upto 600VAC
• Tempreture Range: - 40°C to 85°C
• Class of Operation: A / B / C / D

Selection Guide For Capacitor : Review following factors when selecting capacitors for any given application.\n\nRequired capacitance value & desired tolerance.\nWorking Voltage across capacitor in service\nEnvironmental & Maximum ambient temprature.\nDimensions, Termination type-Sn Plated m.s. /brass treminals (L or U-type), Wire Type, Cable Type. (Lenght for wire required)\nDuty cycle fo equipment, repetiton rate.\nApprox. monthly requirement.\n

Only high quality raw material is used for preparing the offered lot and we make sure that it is sourced from the trusted places and that too after complete quality confirmation. As we have marked a distinct name in the market, we are recognized as the trusted organization for supplying quality Motor Run Capacitors. Specifications : Complying to IS 2993 (For Motors). IS 1709 (For Fans). IS 1569 (For Lighting Fixtures) and relevant International Standards. Fan Capacitors : Conformance to Standards IS 1709/1984 Capacitance range 1.0 MFD to 10 MFD Voltage 440VACMotor Ran Capacitors : Conformance to standards IS 2993/1998 Capacitance Range 1.0 MFD to 144 MFD Voltage:440VACFluorescent and discharge lamp capacitors : Conformance to standards IS 1569/1976 capacitance range 3.15 MFD to 42 MFD Voltage - 250VAC/400VAC.Application : Lighting Fixtures Motors and Pumps Air Conditioners / Washing Machines / Fans Generators ./ CVTs / UPS / Panels / Submersible Pumps Range : 250V AC to 600V AC, 1.0 MFD to 150 MFD.Features : Two layer Metallzed polypropylene. Plastic of Aluminium Can Construction. Manufactured using state of the art automatic computerized equipments. Safety device construction available. Dual rating capacitors also available. In House Metalization

We are chiefly dealing in RAJSHREE Motor Run Capacitors. These Capacitors are primarily made using zinc-aluminum alloy heavy edge metalized polypropylene film along with latest technologies. We are amongst reputed names in this domain of electrical fittings.  We use only certified raw materials to ensure durability of these Capacitors. We have efficient logistics services at buyer’s disposal.Details : 4.00 MFD 5.00 MFD 6.00 MFD 8.00 MFD 10.00 MFD 12.50 MFD 15.00 MFD 20.00 MFD 25.00 MFD 30.00 MFD 36.00 MFD 40.00 MFD 45.00 MFD 50.00 MFD 60.00 MFD 72.00 MFD 108.00 MFD 120.00 MFD 144.00 MFD 180.00 MFD 216.00 MFD

• Brand Name: Vijayshree Electronics

These Motor Run Capacitors are cylindrical case designed for use in motor run applications . These are used for various electrical Appliances like washing machines, air conditioners, water pumps,fans,room coolers etc.  Salient Features Low dissipation factor Long property time Self healing Properties Low Inductance High insulation Resistance

We are offering motor run capacitor 1-60 uf capacitance.

Dual value Capacitors in a single enclosure for twin Motor run applications. For Induction Motors and 3 Phase Asynchronous motors on 50/60Hz single phase supply. Application for Air Conditoners ,Home Appliances, Washing Machines and general Motors. Dual value Capacitors in a single enclosure for twin Motor run applications. For Induction Motors and 3 Phase Asynchronous motors on 50/60Hz single phase supply. Application for Air Conditoners ,Home Appliances, Washing Machines and general Motors. 

Available with us is a wide range of Motor Run Capacitors. These products are designed by following IS 2993 rules and regulations. We make use of the high-grade MPP metalized films that are imported from Japan (OJ) film. Based on the latest technology, our products are widely used in UPS, induction motors, water pumps, diamond motors, and submersible panels. Available in various models and sizes, our range can be customized as per the client's requirements.   Specifications : Body ty type : PP & aluminium Type : Dry & oil Range : 6.00 MFD to 60.00 MFD Volts : 440 V LID type: LIDpe : Wire (180 mm length)

we offer gcd series ac motor run capacitors. gcd series are cylindrical case designed for use in motor run applications and are popular in washing machines. salient features low dissipation factor self – healing properties high insulation resistance standards iec – 60252 – 1993 is – 2993 – 1998 construction

• Capacitance Range: 2.00 mfd To 100.00 mfd.
•  :  
•  : Rated Voltage
• 230 to 3000 Volts.: Temp. Range
• -25 to +85 deg Celsius.: Duty Cycle
• Continuous: Tollerance
• +/- 5.00 %: Frequency

Single phase induction motors are not self rotating due to the lack of synchronously rotating magnetic field. At this juncture the Motor Run capacitor comes in picture. The main purpose of these capacitors is to generate an effective rotary field in single phase motors with two or three stator windings to allow them to be operated on a single phase supply. The capacitors, in this case, remain in circuit during the whole running period of the motor. They are, therefore, ideally suited for single phase motors for use in pumps, fans, air conditioners, washing machines, refrigeration systems etc. By employing the auxiliary winding for power output, a better utilization of the single phase motor is obtained, which is approximately 90 % of the output of the similar rating three phase motor. “YASHA” motor-run capacitors are robustly built as compared to general purpose capacitors available in market as well as they are designed for HEAVY DUTY usage. They are built for motors where Voltage across terminals goes beyond 275 Volts to 380 Volts. Of course at their rated voltage of 230 V and 440 V surge, they gives an even longer life span.  

MRC series capacitors are designed to suit the Motor Industry. With ISS 2993:1998, our MRC ensures smooth running of Motors for longer period of time. Salient Features Ergonomical Design Long Lasting Life Low dissipation factor Good Self-healing properties High Insulation resistance Application Cooler Motors Domestic Motors Exhaust Fans Single Phase Self-Priming Motors

NMC Series Capacitors are manufactured with Zinc Aluminum Alloy High Edge Metalized Polypropylene Film and housed in Polypropylene / Aluminum casing and sealed with high graded epoxy resin. Motor Run Capacitor is of Self-Healing type with very low Dissipation Factor and has a long life. This series can be manufactured with a Safety device to ensure a Burst-Proof construction and to be of a Fire Retardant nature. Additionally, we are reckoned as one of the preeminent Motor Start Capacitor Manufacturers and Suppliers in India. AC Motor Run Capacitor is used in a variety of AC Applications such as Motor Run, Phase correction, Inverters, Power Supplies, Air Conditioners, Air Coolers and in other appliances where medium duty motors are employed. Capacitance Range: 2.0 mF to 50.0 Mf Capacitance Tolerance: ± 5% Rated Voltage (VAC) @ 50HZ 250/ 370/ 400/ 440

• Voltage: 250, 400, 440, 500, 550, 600 and 660 Volts.
• Capacitance: 4 Mfd to 400 Mfd.

Motor Run Capacitors, using the zinc-aluminum alloy heavy edge metallised polypropylene film adopting the latest state of the art technology in processing. They are conforming to IS:2993 applicable for motor run application for continuous duty cycle. These capacitors are used in domestic & agricultural pump sets,control panel, submersible pump sets, jet and monoblock pump sets, air conditioners, coolers, refrigerators etc.

• Brand Name: Syscap
• Tolerance: +/- 5%
• Voltage: 440 VAC
• Capacitance: 25 MFD
• Capacitor Size: 40X73 mm
• Temperature: -40 to 50 Deg C
• Reference Standard: IEC/EN 60252-1,IS 2993-1998

• Type: run cap
• Brand Name: weltake capacitor
• Application: motor panel
• Rated Voltage: 440v AC
• Operating Temperature: 25 to 85 c
• Place of Origin: surat
• grey: grey

We are manufacturing of capacitor like 6 mfd, 8 mfd, 10 mfd, 12 mfd, 15 mfd, 20 mfd, 25 mfd, 30 mfd, 36 mfd, 40 mfd, 45 mfd, 50 mfd.

CONCAP  has more than 30 years manufacturing  experience of Capacitors used by Fan Manufacturers. ACL Fan Capacitors are preferred   for reliability and consistency in  performance hence unfailing choice of Fan OEM’s. CONCAP OEM’s Fan capacitors ensure consistent Air Velocity for the entire Fan’s Life. Our state of the art manufacturing line and stringent quality control systems ensure 100% reliability. CONCAP Capacitors are available both in Dry and Oil Filled Capacitors types. CONCAP Capacitors are known for minimum capacitance droppage and minimum failure rate.    Main Features Made with special technology metallized film that extends the life of the capacitors Can operate with the same efficiency over a wide range of temperatures and humidity Low internal power losses conserve energy Non PCB Encapsulation ECO Friendly High Insulation Resistance

We have more than 30 years of experience in manufacturing capacitors for Motor Run & Start applications. Motor Run & Start Capacitors are widely known for their reliability and consistent performance. Over the years, we have improved quality for reliability and long lasting performance of the capacitor.Our Motor Run and Start Capacitors are made of highly efficient and innovative technology which helps to deliver best quality and reliable capacitors to our valued customers. These Capacitors are made of MPP Film with dry impregnates which gives long lasting performance and longer life.   Features : Made of MPP Film which extended life of capacitors High Efficiency over wide temperatures and humidity Single and Dual Rating Dual Motor Run Capacitors assembled in Single Unit Tailor made manufacturing process which suits all requirement of application. Non PCB Encapsulation ECO Friendly High Insulation Resistance Safe Tin Plated Terminals Wide Variety : Plastic Body with Wire Top and Terminal Top                      Aluminum Body with Wire Top and Terminal Top                      Dual Capacitors with Plastic and Aluminum Top   Application : Motor and Pump Industry Washing Machines Segment Air Conditioning Segment Kitchen Chimney Refrigeration