Motorised Butterfly Valve Dealers

Motorized butterfly valve used for tank automation water filing system

• Material: Cast Iron
• Feature: Durable
• Power: Hydraulic
• Pressure: High Pressure
• Structure: Double Half Shaft
• Port Size: 2cm -50cm
• Number Of Way: 2way

• Material: Cast Iron
• Feature: Casting Approved, Durable
• Technics: Hard Sealing
• Port Size: 2cm -50cm, 5cm-60cm
• Size: 1.1/2inch, 1/2inch, 2inch
• Number Of Way: 2way, 3way

Large capacity. Small Dimensions. Offer two-position or modulating control of chilled and hot water, cooling tower systems, and thermal storage systems Pipe sizes from 2 - 20" for both 2-Way and 3-Way applications Floating, modulating, 2-position direct coupled actuators and industrial-grade electric actuators; high and low pressure spring and non-spring return pneumatic actuators Lug body Manual shut-off valves for end-of-line service Corrosion resistant coating Heavy duty, corrosion-resistant top bushing, located in the upper journal, absorbs actuator side thrust Each valve is factory tested to 110% of specified pressure rating

• Value Size: 50

Marsh Offers Various types & sizes of Valves such as Butterfly, Ball, Sluice, Globe & Dampers with Electrical Actuators. These units will be offered in "Ready for use" condition with backup services of installation & Commissioning assistance.Marsh can also offer the allied electrical & electronic accessories such as control panels, feedback & positioning devices required in close-loop system.Marsh offers Motorised Butterfly Valves from size 50to 1000NB with line pressures of 6 to 16 Bar in wafer or flanged types, similarly Motorised Ball Valves from size 10 to 500 NB in the class of #150, #300,#600 & #800 and connection of screwed, socket weld.

The main variations for this valve are the methods of sealing the perimeter of the disc in its closed position. The simplest variation is to use an elastomeric lined bore which is an interference fit on the disc. The other variations are based on offsetting the disc plane from the axis of rotation allow the disc to close against a circular face seal such that the fluid pressure increases the seal effect. Metallic seals are available allowing the valve to be used for a wide range of fluids at high temperatures

With the help of our team of highly experienced professionals, we are involved in offering our clients an extensive assortment of Centric Disc Butterfly Valve,Our offered valve has inbuilt disc that rotates on shaft to control the flow of fluid, This valve is widely acclaimed for its simple design yet large capacity to handle liquid in bulk amount,Customers can avail this optimum quality valve from us at most affordable prices.

• Brand Name: Pneutork
• Material: Aluminium
• Power: Electrical
• Body pressure: 16kg/cm2
• Degree quarter turn interface: g 1/2time : 30-50 seconds (15-20 second optional)
• Usage/Application: Water
• Valve Size: 1.5 to 12 Inches
• Operator: Electric Actuator
• Packaging Details: Box Packing
• Payment Terms: T/T (Bank Transfer)

• Seat / Disc Seal: EPDM, Nitrile, Hypalon, Viton, Metal seated
• Power Operator: Quarter-Turn or Multi-Turn Electric Actuator

Complies to:Std to be entered, Design :Centric Triple Offset Metalseated, Size:(a) Centric Design: 50 to 1200mm (b) Eccentric Design: 50 to 1800mm, Rating:PN-10, PN-16, ASA-150, ASA-300, MoC : CI-DI-WCB-CF8-CF8M-CF3-CF3M-LCB-WC1-WC6-CN7M-CD4MCu-HAST-BHAST-C

• Media: Water, Air
• Operator: Electric Actuator
• Operation Type: By Actuator

• Brand Name: TMC 5

We are offering motorised butterfly valve. Electrical actuator:- brand - tmc type - electrically reversiblemodel - tmc-tppower supply - 230v 110v 24vac 50csoutput speed - 30 sec.50 secs. For 90â°input signal - change over contact pulse output milliamps volts accessories:- brand - tmc hand wheel for manual operation feed back potentiometer valve position indicator auxiliary switch reversible electrical actuator: (modulating motor) is designed for the most popular application to drive and position dampers, valves and related equipments in heating, ventilating, air-conditioning, oil or gas fired burner system, or any other industrial applications to achieve on-off, floating and proportional control action according to the demand of controller. Wide range of output torque and speed. Economical with high output torque and low power consumption. Cast aluminium construction provides light and rugged enclosure. Designed to replace other makes of actuators. Compact dimensions and easy to install. Low inertia, high torque impedance protected motor. Actuators are available to accept one of several different control signal input. Direct driven feedback potentiometer gives improved resolution. Field adjustable stroke angle with simple cam adjustment. Proven and dependable spur gear train with grease lubrication. Accessories: auxiliary switch with one or two snap acting switches. Feedback potentiometer. Class f winding insulation. Weatherproof enclosures conforms to degree of protection: ip-55 as per is - 2147. Explosion proof enclosure as per is - 2148 for gas group i, iia, iib duly certified by cmrs, dhanbad. Rotary to linear convertor unit linkage sets manual drive facilities spring return model for fail safe application remote position indicator built in signal convertor heater torque switch for overload protection.

• Size: : (a) Centric Design: 32 to 1200mm (b) Eccentric Design: 50 to 1800mm
• Duty: : Weather-Proof / Explosion-Proof

A butterfly valve is from a family of valves called quarter-turn valves. Neoprene, EPDM, Nitrile, Butyl, Hypalon, Viton, Silicon, PTFE in this product of Speciality is Fire-Safe, Extended Stem, High Temperature...

The main variations for this valve are the methods of sealing the perimeter of the disc in its closed position. The simplest variation is to use an elastomeric lined bore which is an interference fit on the disc. The other variations are based on offsetting the disc plane from the axis of rotation allow the disc to close against a circular face seal such that the fluid pressure increases the seal effect. Metallic seals are available allowing the valve to be used for a wide range of fluids at high temperatures.

Dn50-Dn600 (Water type), Non-shock working pressure 16 bar cold working pressure, water and neutral liquids, application, EPDM-10 Degree Celcius Available in Sizes (MM) 50, 65, 80, 10, 125, 150, 200, 250, 300

motorised butterfly valves, electrical actuators, Quarter Turn actuator

Motorised Butterfly Valve, Electric Actuators, Pinch Valves, pfa lined valve

• Brand Name: Cair

We are manufacturer of Motorised Butterfly Valve

Motorised Butterfly Valve, high tensile iron pipes, Actuator ball valve

Motorised Butterfly Valve, Electric Actuator, Electrical Multi Turn Actuator

Motorised Butterfly Valve, Industrial Valve, Electric Actuators

NVBF Series Motorised Butterfly Valves, expansion valves

Our organization offering best Motorised Butterfly Valves supplying company.

Motorised Butterfly Valve

Motorised Butterfly Valve, industrial stainless steel valves, Check Valves

Motorised Butterfly Valve, plastic butterfly valves, flanged butterfly valves

Motorised Butterfly Valve, resilient seated butterfly valve

motorised butterfly valves, LPG Fired Gas Burner

Motorised Butterfly Valve