No Purge Loss Air Dryer Dealers

• Max Temperature: 180 Deg C
• Capacity: 500-5000 CFM
• Minimum Output Dew Point: -20 C
• Drying Capacity: 21 - 50 cfm
• Automatic Grade: Automatic
• Dryer Horse Power: 1 HP
• Maximum Pressure: 4 bar
• Design: Customized

• Brand Name: AEPL
• Country of Origin: India
• Capacity: 500-5000 CFM
• Max Temperature: 180 Deg C
• Automatic Grade: Automatic
• Minimum Output Dew Point: -20 C
• Maximum Pressure: 4 Bar
• Design: Customized
• Dryer Horse Power: 21 - 50 cfm
• Pressure: 1 to 50 kg/cm2g
• Dew Point: -40oC

• Country of Origin: Made in India
• Capacity: 1500 Kg/Hour
• Voltage: 120 V
• Automation Grade: Automatic
• Air Flow Rate: 25 CFM
• Maximum Pressure: 10 Bar

The wet Air / Gas stream is split at the air dryer inlet through a differential distributor valve. Part of this air / gas stream is passed through an external heater and heated to a regeneration temperature of 160-180°C, then it is fed to the Adsorber desiccant tower A containing Silica gel or activated Alumina / Molecular Sieves under regeneration thus removing out the moisture from the desiccant bed. A water cooled / air cooled aftercooler condenses the desorbed moisture which is discharged regularly through the automatic drain trap . after condensation This Air/ Gas stream joins the main incoming air stream and goes for drying to the other tower B under drying. Normally a Cycle time of 8+8 hrs is utilized to complete one cycle of operation. After each operation the changeover is effected automatically. This type of dryer provides an outlet Dew Point of -40 deg C. The Air dryer can be supplied with standard accessarie like simplex / duplex Prefilters / Afterfilters, Flowmeters, dew point meters etc. The system is fully automatic / semi automatic , with Timer / PLC controls with feedbeck to/ from main DCS.   - Instrument air dryers for power plants Refineries & Petrochemicals , chemical & fertilizer plantsetc. - CNG Compressed Natural Gas Drying & conditioning plants , Gas Drayers. - Hydrogen Gas Drier for generator Cooling Application.

We are offering split flow no purge loss air dryer. To save on purge loss, here part of wet air is circulated through a heater thereby increasing its moisture carrying capacity, which is used for regeneration. In this type of dryer incoming wet air is divided in a distributor. 60-70% of wet air goes for drying while 30-40% of wet air is circulated through a heater thereby increasing its temparature which then takes out the moisture from desiccant bed and then it is cooled in an after cooler where moisture is condensed and drained out in moisture separator. This air is sent back to the distributor where it mixed with incoming air and distributed again. salient features :- no purge loss. no need of blower. no used of external air thus eliminating risk of contamination. most economical in the range from 400 cfm onwards.

• Voltage: 220 V
• Drying Capacity: >1000 CFM
• Brand Name: Airro Engineering
• Capacity: 250-4000 Nm3/hr
• Usage/Application: Chemical, Pharmaceutical
• Automation Grade: Automatic
• Working Pressure: 6-15 Bar
• Max. Inlet Temperature: 45 degree C

• Brand Name: Air Care Equipments
• Type: Air Dryer
• Automatic Grade: Automatic, Semi-Automatic
• Design: Customized

No Purge Loss Air Dryers allows wet air circulation that increases its moisture carrying capacity and finds use in the regeneration area. With a part of it goes for drying and another part is circulated through the heater. Some of its advantages include no purge loss, no requirement of blower & external air support that reduce contamination risks, economic performance and effective removal of moisture from desiccant bed. Features: Enhanced performance Low noise level Compact design

Our company is engaged in bringing forth the precision-engineered Split Flow No Purge Loss Air Dryer. The Split Flow No Loss type Air Dryer, we deal in, is designed by highly experienced engineers with the use of superior quality raw materials for manufacturing. Our group of devoted workers never escapes any safety guidelines set by industry. The Split Flow No Loss type Air Dryers can be purchased at reasonable prices from us.Details : Split Flow No Loss type Air Dryer:  Such type of unit machines are also an energy saving equipment. By installing this type of units, we are also not loosing the air produced by the compressor. Under such system, we are splitting the flow in 2 parts for regeneration purpose we use 40% air of the total flow and after completion of the regeneration process this 40% flow will also merged in the main line and then goes for drying purpose, after drying it goes to the after filter and then to the application. To complete this whole process we shall prove two-way, three-way and four-way valves at the required place, which was controlled by a sequence timer which was installed in the control panel.

No Purge Loss Air Dryer, Strip Straightener, Pneumatic Tyres

No Purge Loss Air Dryer, Membrane Dryers, Regenerative Air Dryer

Split Flow-No Purge Loss Air Dryer, Internal Heater Dryer

No Purge Loss Air Dryer, Psa Oxygen Plants