Non Metallic Bellows Dealers

• Color: Black
• Condition: New
• Shape: Round
• Usage: Industrial
• Temperature range: -50 degree C and 1090 degree C
• Pressure range: ± 120 W.

We have a large infrastructure facility, parted into different segments and one of them is warehouse wherein we maintain a large stock for meeting bulk requirements of the clients. We are instrumental in offering extensive range of products that is in compliance with the internationally accepted standards. Thus, the final products are of excetional quality.

• Brand Name: REX

We are offering fabric expansion joints, bellows, non metallic expansion joints etc.fabric expansion joints (bellows) of virtually any size & shape, from a range of proven standard constructions or designed especially for defined application. it is essential that all the relevant parameters and conditions affecting expansion joints are taken into account. rex has three basic types of multi-layer construction to meet the various needs of our customers. type 1 for clean air systems: ranging from simple air intake/exhaust on fans and blowers to high temperature air discharge from heaters. type 2 for gas with low acid content: used on gas turbine exhaust and less severe flue gas systems. type 3 for gas with high acid content: for use in environments where the flue gas contains acids at temperature or acids that can form due to condensation at shut down. acid barriers are either ptfe impregnated glass cloth or ptfe foil thermally welded to ensure tight seal. multi-layer fabric temperature range is from -50°c and 1090°c with a standard pressure range of ± 120” w.g an important difference in the rex multi-layer fabric is that we do not rely on an insulation pillow to reduce the temperature in contact with the element. the multi-layer fabric is always designed to withstand the temperature regardless of secondary insulation pillow. many competitive designs rely on this insulation pillow for primary protection of their element with disastrous results after several temperature cycles. distinct advantages üaccommodate relatively large movements and even some misalignment of flanges. ülight weight & easy to install and with the addition of üinternal insulation bolsters have good acoustic properties. fabric expansion joints can be supplied fully assembled and fitted to support steelwork ready for insertion into ductwork. for retrofit applications, we can supply as factory joined or open for on-site joining where access is limited.

• Country of Origin: India
• Size: 100-1000mm
• Type: Industrial Bellow
• Material: Fabric
• Shape: Oval, Round
• Thickness: 1-5mm
• Application: Air Ducting, Industrial Use, Water Ducting
• Color: Grey
• Feature: Cost-effective, Durable, Dustproof, Easy To Use, Flexible, Heat Resistant, High Performance, WaterProof
• Condition: New
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Brand Name: Porwal
• Style: Fabric Expansion joints
• Hardness: Soft & Flexible
• Temperature Of Media: 50 Deg C to 1000 deg C

• Country of Origin: India
• Material: EPDM
• Shape: Round, Rectangular
• Application: Centrifugal Bellow Inlet And Out Let
• Color: Black, Red
• Feature: Perfect Shape
• Condition: New
• Brand Name: Jyoti

We are making customise non Mettalic fabric bellow. 

• Material: None Metallic fabric bellow
• Color: Black

• Type: Non metalic bellow
• Certification: ISO 9001:2008 Certified
• Application: Industrial
• Color: Black
• Condition: New
• Warranty: 1year
• Country of Origin: India

these are a profoundly adaptable connector shaped of normal or engineered texture. These non metallic bellows and tangled non metallic residue boots are adaptable seals utilized in wide scope of use that is intended to give pressure alleviation in the funneling business for warm developments and mechanical vibration. Both the roars have their own utility and significance. In the event that you rate on the size of Good, better and best. Among both metal roar and non metallic howls, metal cries with the rough numerous layer configuration are considered as the best. In view of its different layer plan, these cries are generally utilized in different mechanical applications in channeling industry. As they are considered as generally dependable and reliable for marine industry for quite a long time. Advantages of metal bellows : Higher pressure range: up to PN 100 Higher temperature range: up to 1000 °C Besides fluids and gases, also suitable for abrasive media and solids Flexible connection types possible Flexible extension possibilities Temperature : Non metallic bellows are constructed with the synthetic material under the temperature range to 230°F, Whereas a flexible metal bellows are designed from a great range from -420°F to +1800°F. However, working pressures are reduced at elevated temperatures.

Ours is a reckoned name in this arena and capable to deliver high quality products to our worthy patrons. One can rely on us for the quality as our offerings are prepared using the best in class raw material. We are acknowledged for providing only damage-free products to the clients. For this, we make use of quality and tamper-free packing materials along with sophisticated packing machines.   Features : Rugged construction Corrosion resistant Low operational cost

In the operating environment the critical stresses and movements may act in axial, lateral or angular directions and the bellows must therefore be designed and dimensioned to accommodate these movements.

Resistoflex Bus Duct Connectors are a highly flexible rubber and fabric connector used on large blower ducts to reduce and isolate vibration and to protect expensive electrical equipment from thermal movements. The multi-convolution construction allows for more than 25 mm of movement in any direction. These parts are carefully hand built by skilled craftsmen and employ the finest materials available for fighting the environment and destructive ozone attack. Resistoflex flexible bellows can alleviate ductwork movement problems in power stations and help ensure operational efficiencies. Bellows do not have any standard dimensions manufactured to customers specific dimensions. Nevertheless the design is aimed for maximum movement to be compensated. TECHNICAL FEATURES Custom designed square, rectangular, round Integral moulded flange design Maximum Operating Pressure 200mm W.C. Test Pressure 300mm W.C. at RT Available in wide choice of elastomers Provides piping relief from vibration, thermal movement, shock and stress Compensates Misalignment APPLICATIONS BUS DUCTS FAN CONNECTORS PIPE CHUTES FORCED DRAFT LINES AIR, WATER SLURRY FLUE GAS SYSTEMS HOT GASES PIPE WALL SEALS VENTILATION SYSTEMS INDUSTRIAL PROCESS DUCTS CHEMICAL PLANTS PETROCHEMICAL PLANTS PLANT CONSTRUCTION POWER STATIONS COMBUSTION GAS DESULPHURIZATION PLANTS PURIFICATION PLANT

RUBBER BELLOWS EXPANSION JOINT With the support of our professionals, we bring forward a premium range of Rubber Expansion Joints.These are used in high pressure and low temperature application and acts as effective vibration isolators when used on engines,pumps,turbines and other similar machines.

Ideally selected based on all types of flow directions and dust load. However, depending upon the flow direction sleeve orientation and types of sleeve will be modified.Fabric life is enhanced since the fabric is never exposed to the medium temperature and is always protected by insulation bolster and sleeve.The fabric could be easily replaced in case of any emergency exigencies like change in process parameters.

Metallic Bellows are the expansion controls in pipelines, ducting & vessels which carry hot or cold fluids or which are exposed to large variations in temperature is a major problem confronting designers, consultants & users.

We are among the celebrated names in the industry for manufacturing and exporting Non Metallic Bellows for our valued customers. The offered bellows are made in tune with the industry standards for meeting the requirements of clients. These bellows are seamless in terms of finish, resistant to wear & tear and available in a wide range of dimensional specifications for meeting the demands of clients.

• Country of Origin: Made in India
• Material: Industrial Coated Fabrics
• Color: Black
• Thickness: 0.28 mm
• Shape: C - Type
• Corrosion Resistance: Yes
• Usage/Application: Industrial
• Hardness: Flexible

Non metallic expansion joints are flexibles connectors designed to provide stress relief in ducting systems by absorbing movement caused by the thermal changes.   They also act as vibration isolators and shock absorbers.   They are fabricates from a wide variety of non metallic materials including synthetic elastomers, fabrics, insulation materials & fluoro-plastics depending on design.   Rubber expansion joints –Rectangular, Circular & Square. Fabric expansion joints –Rectangular, Circular & Square. These can be supplied in circular, square and rectangular shapes with end flanges as per customer requirement.   FLANGES :   Available as per ASA-150, ASA-300 pound ratings.

SBM Bellows offers to its customers all types of non-metallic bellows and cover used in various types of industries. Non Metallic Bellows are made from various types of materials like Rubber, leather, Fabric(high temperature), Plastic, Canvas, Rexene each having its distinct advantage and application. Non Metallic bellows are designed and manufactured in various shapes and sizes as per customers requirement like circular, square, rectangular, C Type, hexagonal etc. SBM Non Metallic Bellows are used mainly in Food Industries, Cement, Chemical, Coal, Electrical Railways, Hydraulic, various Machine etc. Our Non Metallic Bellows are exported to countries in Europe, South America and Africa. Our Non Metallic Bellows are widely acclaimed among customers for its high durability, low cost, long service life and easy maintenance.

Non Metallic Bellows for Medical Equipments, Square Shaped Bellows

non metallic bellows, Axial Bellows, Stainless Steel Bellows, Metal Bellows

non metallic flexible bellows, metallic flexible bellows