Oil Injectors Dealers

• Pressure: 2500 kg/cm2
• operate: upto 300 kg/cm2

The pressure required to dismount bearing assemblies generally is in the 200 to 500 kgcm2 range; and for torque-transmission joints is in the 800 to 1800 kgcm2 range. It is only in exceptional cases that a pressure of 2500 kgcm2 is required.

• Size: 1/4X1/4, 3/8, 1/2, 3/4
• Warranty: 1 year
• Adaptor Sizes available: 1/4 x 1/4, 1/4 x 3/8, 1/4 x 1/2, 1/4 x 3/4

for bearing removal from the shaft. ‘sujay’ oil injector pump kit with oil reservoir , high pressure pipe , connection nipples with or w/o pressure gauge. pressure 3000/3500/4000 bar  

  Cenlub Systems Oil Injectors are designed for applications where minute metered quantity of oil is required. These injectors can deliver an outpout of as low as 0.003 cc/shot and can go upto 0.03 cc/shot. Ideal for applications where minimal amount of oil is required at high frequency.

GM High Pressure Oil Injector Pump GM IP - series manufactured byGM Group is designed to operate up to 3000 kg/cm2 giving adequate pressure for all normal dismounting applications.System: The pressure required to dismount bearing assemblies is 200 to 500 kg/cm2 range; and for torque-transmission joints is 800 to 1800 kg/cm2 range. In optional case the pressure required is 2500 to 3000 kg/cm2 is required. Field of Use: This System has a variety of applications; from small components to extremely large ones with cylindrical or taper seats. It is widely used for mounting and dismounting components with interference fits which are transmitting large fluctuating loads, such as gears, flywheels, crankshafts, couplings and bearings. Mounting and Dismounting:Oil Injection System is the only method of mounting and dismounting for shrunk fit components without damage. The mounting and dismounting force is reduced, or almost eliminated, by using the oil injection method.

The 226400 E series is suitable for many applications using the SKF oil injection method. The injector is supplied with an oil reservoir in a compact carrying case. The injector can be mounted directly onto the work piece or connected to an adapter block to make a floor standing model, making it easy to connect pressure gauges and high pressure pipes. For applications where 400 MPa (58 000 psi) is required, the SKF 226400 E400 is available.

• Maximum Operating Pressure: 1000 psi
• Minimum Operating Pressure: 750 psi
• Suggested Operating Pressure: 850 psi
• Reset Pressure: 150 psi
• Output Volume per Cycle: Adjustable: 0.001 to 0.008 sq in
• Wetted Parts: Carbon Steel, Stainless Steel, Copper, Fluoroelastomer
• Recommended Fluids: Minimum SAE 10 Weight Oil
• Maximum Operating Pressure: 3500 psi
• Minimum Operating Pressure: 1200 psi
• Suggested Operating Pressure: 2500 psi
• Reset Pressure: 200 psi
• Output Volume per Cycle: Adjustable: 0.001 to 0.008 sq in
• Wetted Parts: Carbon Steel, Stainless Steel, Copper, Fluoroelastomer
• Recommended Fluids: Grease N.L.G.I. Grades #000 to #2

This instrument is used for controlled injection of the silicon oil into the eye with minimal efforts. The syringe filled with silicone oil is loaded onto the injector. Slow rotation of the handle pushes the syringe piston forward injecting the silicon oil in the eye.» Both 5 ml & 10 ml syringes can be loaded.» Made in Stainless Steel.» Autoclavable.» Special attachment to firmly hold the Infusion Cannula in place. Wide field Irrigating Vitrectomy Lens This lens is designed for wide angle viewing of phakic, fluid filled eyes during vitrectomy. The lens helps in visualization of the posterior and peripheral fundus in phakic and aphakic eyes. It is also useful in endolaser of peripheral fundus.

• Material: MS
• Capacity: VAriable
• Application: Industrial
• Max Flow Rate: Variable
• Usage/Application: Greasing of Machinery
• Usage: Oil and Grease

• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch, 4/5inch, 5/6inch, 6/7inch
• Type: Oil Injectors
• Material: Carbon Steel, Metal, PP, PVC, Stainless Steel, UPVC
• Color: Black, Blue, Red, Sky Blue, White
• Pattern: Plain
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Feature: Blow-Out-Proof, Casting Approved, Durable, Easy Maintenance., Investment Casting, Smooth Finish And Robust Design
• Warranty: 1 Yr, 2 Yrs

• Brand Name: SKF
• Place of Origin: Sweden
• Port: Ahmedabad

Ultra-High Pressure Injectors are used to install and demount interference-fit parts such as bearings, couplers, wheels, hubs, propellers and so on. Works on the principal of injecting oil under ulta-high 2 pressure of 3000 kg /cm between mated surfaces. Low effort on handle allows one-man operation. Easy to use.

• Material: MS, Brass
• Warranty: 1 year
• Brand: Lubrotech
• Flow Rate: 0.05-1.6 cc
• Dosages: from 2-50 drops

This instrument is used for controlled injection of the silicon oil into the eye with minimal efforts. The syringe filled with silicon oil is loaded onto the injector. Slow rotation of the handle pushes the syringe piston forward injecting the silicon oil in the eye. both 5 ml & 10 ml syringes can be loaded. Made in stainless steel. Autoclavable. Special attachment to firmly hold the infusion cannula in place.

DMI-1 with Dosage 0.01 cc, 0.03 cc, 0.05 cc, 0.10 cc, 0.16 cc Per StrokeDMI -2 With Dosage 0.25 cc, 0.40 cc Per Stroke.DMI -3 With Dosage 1.00 cc, 1.60 Per Stroke Note: Above metering injectors are available in M.S. as well as brass with honed bore Nitrile rubber parts & accurate dosage

• Material: Mild Steel
• Brand Name: SKF
• Model Name/Number: 226400 E
• Usage/Application: Bearings, Couplings, Railway Wheels, Gear wheels, Flywheels
• Features: Easy To Connect Pressure Gauges And High Pressure Pipes
• Oil Capacity: 200 cm

Oil Injector, two stage pumps, Air Pumps, aluminum cylinder, Cutters

Soap Oil Injector, Ms Trolley Atp Trolley, Unloader Valve Car Wash

oil injectors, Progressive Distributor Block, Pneumatic Spray Grease Pump