Oil Insulation Test Kit Dealers

• Brand Name: neon
• Power: 230 v ac, 50 hz
• Application: oil filtration
• Certification: CE Certified, ISO Certified
• Feature: High Accuracy
• Packaging Type: Catron
• Type: Oil Testing Kits
• Warranty: 1 Yr
• After-Sales Service Provided: one year
• Country of Origin: India
• Sample Type: Oil
• Result Type: Quantitive
• Testing Type: Oil Testing

• Brand Name: AQUASOL
• Condition: New

Total hardness is determined by the multivalent cations' concentrations present in water. Total hardness is a measurement of the mineral content in a water sample that is irreversible by boiling. Therefore, total hardness can be equivalent to the total calcium and magnesium hardness.

• Material: Mild Steel
• Brand Name: AS Electrotech
• Capacity: 1200 VA
• Usage/Application: Oil Test
• Display: Digital
• Input Voltage: 230 Volts + 10% 50 Hz.
• Surface Finishing: Color Coated
• Output Voltage: 120 KV
• Phase: Single Phase

• Brand Name: SIVA
• Power: 230V AC +- 10%, 50Hz, single phase
• Voltage: 0 to 100kV AC
• Country of Origin: Made in India
• EMI / EMC Standard: IEC 61326
• Usage/Application: oil testing
• Accuracy: +/- 1% of FSD
• Display: 3 1/2 digit LCD
• Safety Standard: IEC 61010

• Feature: Suitable for silicon,mineral and estar oil, Oil test set available in three different ranges, OTS series in fully automatic,analog and digital type.

a wide range of Oil Breakdown voltage test kits to check integrity of insulating oil used in Transformers, Capacitors, XLPE cables and Switchgear for safe operation and maintenance. OTS series comes in three distinct models - OTS100A, a preprogrammed fully automatic kit ; Motorized ( Digital ) OTS100DS kit and OTS100 an analog motorized cum manually operated kit. Designed with unmatched quality and improved reliability and safety having earth & zero start, safety door interlock ensuring high degree of protection.

Transformer Oil or Dielectric Insulation Oil and other oils required for electrical machinery and installations can be manufactured using hydro finished base oils of group II +. The base stocks are selected based on viscosity requirements of the user. In colder countries pour point is also a critical property for base oil selection. Transformer Oil (TO) be used for filling the transformer with a primary objective of providing electrical insulation between the primary and secondary coils. Dissipation of heat generated during the process is also an important function. Electrical insulation is favored by high viscosity and heat dissipation is favored by low viscosity and circulation of fluid. Base oil viscosity at a compromise level is selected. Viscosity ranges for base oil slightly defer country to country, generally in the range of 10 to 40 cst. at 400 Degree C. During the service temperature of oil rises to about 60-800 Degree C. Viscosity of oil decreases due to temperature rise. Transformer has large extended surfaces exposed to atmosphere. The oil circulates through these tubes and dissipates heat into the atmosphere.

• VOLTAGE Range: 0 to 100 KV AC
• POWER SUPPLY: 230V AC+/-10%, 50Hz +/- 3 %. 230V /110VAC , 60Hz on request

The oil insulation test kit is intended to be used for testing of dielectric strength of insulating oil used in Transformer , Circuit breaker, CTs, PTs etc. The test kit is fully automatic and has the facility for AutoManual selections. The operator simply needs the sample in the test vessel & selects the required test. Testing can be done as per many international ( IEC & European standards ) which are programmed into the instrument memory . Stand time, stir times & rate of rise of applied voltage can be selected in Custom Mode also , one set of such selected mode can also be stored in the memory. In addition to the above set can also perform withstand test (proof) tests. In this test the set allows the set voltage to pre-set value & hold for one minute to see if breakdown occurs. The backlit LCD is used for user friendly operations during the test process. It also display fault condition messages such as open ground cover open . All the user selected programmes are chosen through(4x3) key pad. The test results can be printed along with with test type, date, time, breakdown test voltage, averages and deviations. Voltage value can be measured & printed with a resolution of 0.1 kV. In reprint option it is possible to have number of printouts for the last test. For each test the readings are recorded and stored in memory. All stored readings can be transferred via the RS-232 interface to PC(Optional).A safety interlock prevents access to the high voltage terminals during testing. The design ensures a high level of safety for the operator. The high voltage chamber is covered by a polycarbonate door.

The motorized (Automatic) Oil Insulation test Kit is intended to be used for testing of Dielectric strength of insulating oils used in transformers & circuit breakers.  

oil insulation test kit, Copper Cables, rigid sheets, mica paper

oil insulation test kit, Transformer Winding Resistance Meter

oil insulation test kit, Electronic Instruments, Metal Detectors, turnstiles

The oil insulation test kit is intended to be used for testing of dielectric strength of insulating oil used in T ransfor mer , Circuit breaker , CT s, PT s etc.