Optical Amplifier Dealers

• Material: Frp
• Application: Industrial
• Frequency: 50Hz
• Feature: Easy To Connect, Proper Working
• Accuracy: High Accuracy
• Contain: With Twin Adjusting Dials

BF3R Series, a fiber optic amplifier with built-in twin jog-dials, features precise control of sensitivity using coarse-dial and fine-dial. This series offers fast and accurate sensing performance with fast response speed of under 1ms. Also, this series employs free-cut type fiber optic cables where the cable length can be adjusted to the work environment needs.Features : Convenient DIN rail mounting type Response time - Max. 1ms Enables to adjust sensitivity with high accuracy by dual adjuster Selectable Light ON/Dark ON operation mode by control wire Reverse power polarity and short-circuit(Overcurrent) protection circuit Enables to use for explosion proof(Fiber part) Adjustable length with free cut type fiber optic cable

• Voltage: 220VAC + 10%, 50Hz
• Warranty: 1 Year
• Feature: Dual RF Output, Mains cum Power pass
• Power Meter up to: 11 dBm
• Optical Wavelength: 1310 — 1610 nm
• R.F. Frequency Range40 — 860 Mhz.: 40 — 860 Mhz

• Feature: Wavelengtd 630nm – 1064nm Output power up to 2W Nearly diffraction limited Easy coupling to master oscillator
• Benefits: High performance, low cost Stable and robust Use witd MOGLabs External Cavity Diode Las
• Applications: Laser cooling and trapping Bose-Einstein condensation Quantum optics: squeezed light Etc

The MOGLabs Optical Amplifier is an indispensable extension for single-frequency external cavity diode lasers. Laser power is increased by up to 2W, while maintaining tde tunability and linewidtd of tde injection seed laser. Replacement of tde amplifier diode and alignment are easily accomplished by tde end- user. Input and output Faraday isolators are a recommended optional addition. Wavelengtd options extend from 630nm to 1064nm, and power from 500mW to 2W.

Developed to provide world-class long-range detection, DF-G3 fiber amplifiers are advanced sensors featuring dual digital displays for use with plastic and glass fiber optic assemblies. Models with IO-Link enable a point-to-point communication link between a master device and a sensor, facilitating remote monitoring, teaching, and configuration World-class long-range sensing capability, more than 3 m (10 ft) with opposed mode fibers Easy to read dual digital displays show both signal level and threshold simultaneously Simple user interface ensures easy sensor set-up and programming via displays and switches/buttons or remote input teach wire Cross-talk avoidance function allows seven inspections in dense sensing point applications Energy efficient light resistance enables stable detection in industrial lighting environments High-power amplifier with small core fibers enables precise position sensing of small components Multi-function remote wire allows control of the LED, outputs, remote teach input, and cross-talk avoidance. Operator control of the sensitivity (hysteresis) provides additional detection sensitivity, or a stabilized output depending on the application details Lever action fiber clamp provides stable, reliable, and trouble-free fiber clamping Expert TEACH and SET methods ensure optimal gain and threshold for all applications, especially for high speed or low contrast applications

• Brand Name: Banner
• Model Name/Number: Banner Fiber Optic Amplifiers
• Minimum Order Quantity: 1 Piece

• Color: GREY
• Condition: New
• Wavelength: 1550 nm
• Brand: UNIWAY
• Power: AC 100V
• Model Number/Name: UNIWAY EDFA
• Weight: 10Kg
• Dimensions: 483 x 320 x 44 mm
• Humidity: 95% non-condensing
• Interface Type: RS232/RS485 network interface or RJ45
• Noise Figure: 17dBm
• Optical Input Power: -3.0
• Optical Return Loss: Greater Than 55dB
• Power Consumption: 25 W (less than 20dBm),30 W (higher than 20dBm)
• Pump Laser Wavelength: 980nm or 1480nm
• Saturated Output Power: 14
• Storage Temperature: 20
• Features: Amplification of1550nm optical signals on single mode fibre.,23 dBm JDSU pump.,Output power of 4X 16.5 dBm,Optical input level (dBm) -5 to 0.

• Amplifier Type: Booster
• No. of Channels: One

the erbium doped fiber amplifiers (edfa) has generated a lot of interest in both optical communication industry and research community because of their inherent ability to directly amplify signals in the optical domain. Optiwave has developed one such optical amplifier based on edf. These amplifiers are available in different models to suit the customer's specific requirements. The unit is available in three different versions viz., 1u rack mountable that can be easily fixed in any standard 19" racks, gain block (msa) that can be used as a bench-top model and pump driver provided with only the pump drive electronics. features applicationsnetwork signal boostersdh/sonet systemscatvr&d applicationsoem application   the required model can be selected based on customer requirement.   the small signal gain can be up to +35 db.   the available output powers are from +10 to +23 dbm.   provision for co-propagating and counter-propagating of pump power.   the unit is provided with rs232 interface, lan interface along with snmp capabilities.   the user can set the required output power or define the pump laser drive conditions.   the unit is provided with redundant power supply, ac mains (90 to 250 v, 50 ± 2 hz) or -48 ± 4 v or +5v.

We Offer Optical Amplifier. The High Power Optical Amplifiers Model 916H is primarily used in FTTH distribution applications. It comes with single input port and up to 32 output ports. It is configured for high output powers up to +33 dBm and can service more than 1000 CPEs/ONTs. These amplifiers are available in different models to suit the customer’s specific requirements. The unit is available in 2U rack mountable version that can be easily fixed in any standard 19” racks. FEATURES High output powers are from +13 to +20 dBm per port Up to 32 output ports Integrated safety features Interface options of with RS232, LAN along with SNMP capabilities. The unit is provided with power supplies, AC mains (90 to 270 V) or -48 ± 4 V APPLICATIONS FTTH CATV distribution RF video over Fiber Triple-Play services

• Part Number: OE-300
• Model Number: OE-300-SI-10
• Dark current: 0.12 nA typ.
• Spectral response: 400 - 1000 nm
• Detector: Si-PIN photodiode
• Sensitivity R: 0.58 A/W typ. @ 850 nm
• Active area: 1 mm x 1 mm (1 mm2 )
• Lower cut-off frequency: DC/100 Hz, switchable
• Upper cut-off frequency: up to 200 MHz (see table below), switchable to 1 MHz or 10 MHz

• Type: Amplifier
• Power Supply: 12 - 24 VDC
•  :  
• Beam Source: Red
•  :  
•  :  
• Output: PNP
•  :  
• Cable Length: 2m
•  :  
• Current Comsumption: Max 45mA

The Erbium Doped Fiber Amplifiers (EDFA) has generated a lot of interest in both optical communication industry and research community because of their inherent ability to directly amplify signals in the optical domain. Optiwave has developed one such optical amplifier based on EDF. These amplifiers are available in different models to suit the customer's specific requirements. The unit is available in three different versions viz., 1U Rack mountable that can be easily fixed in any standard 19" racks, Gain block (MSA) that can be used as a bench-top model and Pump driver provided with only the pump drive electronics.

Keyence FS-N18N Optical Fiber Amplifier, Solenoids, Heavy Duty Connector

Fiber Optic Distribution Amplifiers, Projector Mounts, plasma tvs

Optical Amplifier (EDFA), Optical Fiber Universal Mechanical Splice

optical amplifiers, OPTICAL BYPASS SWITCH, Networking, Installation

optical amplifier, Rf Transmitter, optical products

Fiber-Optic Amplifiers, optical fibers, sealed inductive proximity switches

Rack Mount Optical Amplifiers, High Power Multimode Laser Diodes

Optical Receiver Amplifier, CATV Line Amplifier, Coaxial Cable

Fiber Optic Amplifiers, Photoelectric Cylindrical Sensors

Extra Long Range Optical Amplifier, Media Converter Chassis

Optical Decoder With Amplifier, audio amplifier kit

Autonics Dual Display Fiber Optic Amplifiers, Electromagnetic Relays

Fiber Optic Cables Simple Fiber Amplifier, Servo Motors, SVC Micro Drives

optical amplifier, Component Video Cable, Super-G Wireless PCI Adapter

optical amplifier, sdh multiplexers, pdh multiplexers

Optical Fibre Node Amplifiers, P.A. Cassette Players, catv amplifiers

Fibre Optic Amplifier, catv amplifier, CATV Splitter / Tap Off

Banner Fiber Optic Amplifiers, Pepperl Funchs Displays and Signal Processing

Fiber Optic Amplifier, water cooled jumper cables, Tower and Signal Lights