Optical Connector Dealers

• Measure: FC Connector
• Durability: IEC61300-2-2 Fibre Optic Interconnecting Devices

An Optic fiber Connector terminates the end of an optic fiber cable and enables quicker conenction and disconnection. The connectors mechanically couple and align the cores of fibers so that light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. A variety of optical fiber connectors are available, but SC and LC connectors are the most common types of connectors on the market. Typical connectors are rated for 500–1,000 mating cycles.The main differences among types of connectors are dimensions and methods of mechanical coupling.Different connectors are required for for multimode, and for single-mode fibers.

We are named amidst the prominent Optical Fiber Connectors Manufacturers and Suppliers in India. Our Optical Fiber Connectors are used for fiber cable. Capable to work for long distances, our Optical Fiber Connectors are high in demand in the industry. Our Optical Fiber Connectors are available at the most competitive prices.

• Application: Telecom/Data/Network
• Condition: New
• Warranty: 1 Year
• Insertion Loss: Single Mode <0.3dB
• Connection: Simplex , Duplex
• Available Sizes: 0.9, 2.0 and 3 mm
• Multi Mode: <0.5dB
• Wavelength: 1310nm/1550nm

• Material: PVC
• Usage: PCB, Automotive, Telecom/Data/Network
• Conductor Material: Copper
• Voltage: 12-24V
• EL Connector: 2-Pin, 3-Pin, 4-Pin
• Frequency: 65 GHz

• Category: Optical Connectivity Solutions
• Mode: Singlemode, Multimode
• Defense: Military/Aerospace

Typically when front cards are replaced or maintenanced, the chassis cabling needs to be disconnected and the system shut down while work is done. Molex’s MPT CPI Coplanar Optical Backplane Interconnects enable front cards to be replaced without disrupting cabling at the rear of the chassis. This results in maintenance flexibility, minimal service disruption and a smooth transition from front blade active devices to the rear transition module. Advanced Telecommunications Computing Architecture (ATCA) specifications were developed to standardize requirements for communication network infrastructure. ATCA zone 3 connectors are used to connect a front board to a rear transition module. The MPT CPI interconnects meet the dimensional requirements of ATCA zone 3 connector specifications, making it an industry standard connector system for multi-fiber and parallel optical transceiver applications. Not all communication networks are comprised of ATCA-compliant infrastructure but need high-performing and versatile components nonetheless. The MTP CPI Optical Backplane Connector System can be used in any coplanar backplane, along with ATCA applications. It’s easy to design in and is mounted directly to the card with a simple pass-through cutout in the optical backplane. The use of the MT ferrule in the MTP connector provides 8 to 72 fibers.

• Features: Shock proof, Available in customized specifications, Durable, Non breakable .

• Material: Fiber
• Number of Pins: 2
• Operational Temperature: -20 deg C to +70 deg C
• Return Loss: -50 dB (UPC)
• Insertion Loss Maximum: 0.30 dB
• Fiber Type: Multimode 62.5/125
• Cable Material: PVC

Features Low insertion loss and back reflection loss High precision alignment Compact design With/Without flange Shuttered and without shutter SC/PC Choice of housing material and sleeve material Telecordia, ANSI, TIA/EIA,NTT and other compliance

application: fiber optic and coaxial sma/smb/sfr connectors sc/st/fc crimp size: hex .151", .178", .213" hex 3.84, 4.52, 5.41mm.

• Material: PVC
• Number of Pins: 2
• Connector Type: Female,Jack

We Offer MPO Optical System consists of MPO Cable Assembly and MPO hybrid break-out which are available in SM and MM versions. MPO cable assemblies are multi-fibre cables using single MPO connectors of 6, 8, 12 & 24 that are used to interconnect pre-terminated devices. The MTPMPO assemblies are suitable for high-density back plane and Printed Circuit Board (PCB) solutions in data and telecom systems providing significant space and cost savings. Precision moulded thermoplastic MT ferrules together with metal guide pins and precise housing dimensions ensure fibre alignment when mating. Push-pull latching mechanism with audible click ensures proper connection.

Crossmatrix is a leading fibre optic cable suppliers in the India, which includes fibre optic cables and accessories.Crossmatrix also stock a wide range of loose tube fibre, tactical fibre and tight buffered bulk fibre cable, 9125 single mode and 62.5125,50125 micron multi-mode (OM1,OM2,OM3 & OM4) fibre patchcords and pigtails and a full range of fibre optic connectors,Whether you’re looking for a fibre patch panel, a wall mount fibre enclosure or a specific fibre optic connector, fibre adapter, we have the right products for the job. We stock a full range of OM1, OM2 ,OM3 & OM4 fibre patch cords with various MTRJ, SC, ST, FC or LC connector configurations.

MacArtney OptoLink connectors combine robustness and reliability with flexibility and ease of use. They provide low noise fibre optic connections for one to four optical fibre passes in a wide range of configurations for connector and penetrator types. Thanks to spherical lens technology, MacArtney OptoLink connectors are easy to clean and reassemble in the field. OptoLink connectors are robust and reliable and are rated for depths of up to 6,000 metres. Their flexible cables also make the connectors easy to work with. MacArtney OptoLink connectors are available in flange (FCR), bulkhead (BCR) and cable mount (CCP, CCR) configurations from stock in both Nickel Aluminium Bronze C63000 and stainless steel AISI 316 housings.

Fibre Optic Cable Connectors - with BA Threads, BSW Threads, UNC, UHF Threads   Specification followed : IS 1367 BS 3692   Material : Free cutting Brass 319 type or BS 249 type Any special Brass Material Composition as per customers requirement Threads : ISO Metric (MM Threads) BA Threads BSW Threads (Inches) UNC, UNF Threads Any threads as per custom design. Size : Specification or as per custom design or requirement.

An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection which is better then jointing or connecting. The connectors mechanically couple and align the cores of fibers so light can pass.

• Measure :: FC Connector
• Operating Temperture : -: 40°C to + 85 °C
• Ferrule Diameter :: 2.5mm ± 0.001

An Optic fiber Connector terminates the end of an optic fiber cable and enables quicker conenction and disconnection. The connectors mechanically couple and align the cores of fibers so that light can pass. Better connectors lose very little light due to High Precision Ceramic Ferrule High Precision Polymer housing Simplex or Duplexreflection or misalignment of the fibers.

We provide the best in class Fibre optics connector and components. Our product range includes Fibre optical connector, Adapters,PLC Splitter & Attenuator. We provide the best industry prices and services. Our products also have all the required quality checks like ROHSSGSIEC.

• Features: Premium quality, high Accuracy, non-corrosive, smooth Finishing
• Product Code: ADL-104

• Feature: Hermaphroditic design,No mating frame required in the backplane,Inner housing is spring loaded
• Category: Optical Connectivity Solutions
• Mode: Singlemode, Multimode

Typically when front cards are replaced or maintenanced, the chassis cabling needs to be disconnected and the system shut down while work is done. Molex’s MPT CPI Coplanar Optical Backplane Interconnects enable front cards to be replaced without disrupting cabling at the rear of the chassis. This results in maintenance flexibility, minimal service disruption and a smooth transition from front blade active devices to the rear transition module. Advanced Telecommunications Computing Architecture (ATCA) specifications were developed to standardize requirements for communication network infrastructure. ATCA zone 3 connectors are used to connect a front board to a rear transition module. The MPT CPI interconnects meet the dimensional requirements of ATCA zone 3 connector specifications, making it an industry standard connector system for multi-fiber and parallel optical transceiver applications. Not all communication networks are comprised of ATCA-compliant infrastructure but need high-performing and versatile components nonetheless. The MTP CPI Optical Backplane Connector System can be used in any coplanar backplane, along with ATCA applications. It’s easy to design in and is mounted directly to the card with a simple pass-through cutout in the optical backplane. The use of the MT ferrule in the MTP connector provides 8 to 72 fibers.

An optical fiber connector terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so that light can pass. Most optical fiber connectors are spring-loaded: The fiber endfaces of the two connectors are pressed together, resulting in a direct glass to glass or plastic to plastic contact, avoiding any glass to air or plastic to air interfaces, which would result in higher connector losses. In the development of fiber optic technology over the last 30 years, many companies and individuals have invented the "better mousetrap" - a fiber optic connector that was lower loss, lower cost, easier to terminate or solved some other perceived problem. In all, about 100 fiber optic connectors have been introduced to the marketplace, but only a few represent the majority of the market. Here is a rundown of the connectors that have been the leaders of the industry. We are providing some of the popular FO connectors: In the development of fiber optic technology over the last 30 years, many companies and individuals have invented the "better mousetrap" - a fiber optic connector that was lower loss, lower cost, easier to terminate or solved some other perceived problem. In all, about 100 fiber optic connectors have been introduced to the marketplace, but only a few represent the majority of the market. Here is a rundown of the connectors that have been the leaders of the industry.

• Type: Cable Connector
• Material: Fiber Optic Cables And Connectors
• Application: Home
• Feature: High Tensile Strength

We are the main supplier of this product.

• Material: PVC
• Usage/Application: Telecom/Data/Network
• Packaging Type: Packet
• Operating Temperature: -40 to +75 deg C
• Connector Type: E2000 APC
• Connection: Simplex, Duplex

• Supply Ability: 50000 Piece/Pieces per Month
• Brand Name: NeST
• Place of Origin: Kerala, India
• MPO Patch Cord: blue

• Model Number: SC/PC, APC
• Brand Name: WOW ECO

All type fiber connector like fast connector, optical adaptor scpc -scpc, scapc-scapc,optical attenuators, patch cord & pigtail.

Fiber Optic Connectors, Adapters, jumpers

fibre optic connectors, Server Rack, transmission racks, open racks

optic fiber connectors, gsm products, Led Lightings, optic fiber adaptors

Fiber Optic Sc Connector, fiber optic fc adaptor, Fiber Optic Fc Connector

Fiber Optic Connectors, coaxial ribbon cable, electromechanical devices

Fiber Optic Connectors, Circular Connectors, audio connectors