Orifice Flange Assembly Dealers

• Type: DP
• Brand Name: KABIR
• Material: SS,PP
• Place of Origin: VADODARA

We are offering orifice flange assembly. The orifice plate with flange assemblies are employed for measuring the rate of flow or quantity of moving fluids like liquids, gases or vapours. The orifice plates are designed as per bs1042-1981 iso 5167 & kabir standards. When a device such as an orifice plate in a pipe line through which a fluid is flowing, as static pressure difference exists between the upstream side & the downstream side of the device is geometrically similar to one on which direct calibration has been made, the conditions of use being the same, the rate of flow may be determined from a knowledge of the circumstance under which the device is being used. technical specification orifice plate :ss 316 ss 314 monel line size :15 nb to 600 nb flanges :astm-a-105a182 s 316ss 314 monel. Optional :ibr approved flanges type of flanges :weld neck slipon socket� weld type of tapping :flange taps corner taps radius taps size of taps :12 inch npt (f) studs bolts :astm-a-193 gr b7 nuts :astm-a-193 gr 2h gasket :spiral woundcaf teflon

Orifice Flange Assemblies Plate Designed as per BS Standards 1042 part 1964 on IS Standards, Flanged are available as per customer’s Specifications: Orific plate along with Flanges are suitable for installation in 50 NB and above pipe lines sizes and can be provided in wide on Material. We are one of the leading manufacturer of Orifice Flange Assemblies, supplier of Orifice Flange Assemblies, exporter of Orifice Flange Assemblies.

INTEGRAL ORIFICE PLATE ASSEMBLY Integral Orifice Plate Assembly is used for the measurement of flow or quantity of fluids like liquids, gases or vapors of low flow rate in closed conduits, where high accuracy is desired. The Integral Orifice Plate Flange Assembly may be directly mounted to the Differential Pressure Flow Transmitter, thereby eliminating the need of separate impulse piping.

We Are The Manufacturer And Supplier Of Orifice Plate Assembly And Venturi Which Have The Following Types: Teleflo Orifice Plate, Orifice Plate Assembly Etc. Weldneck, screwed, slip-on forged flanges. Flange taps, vent and drain. Orifice plate of SS, Monel with tag. Plat design as per B.S./A.P.I. Std. H.T. Bolts and Nuts. Jack screw provision.

We are a prominent Orifice Flange Assembly Manufacturer, Exporter and Supplier from India. Used in the measurement of flow for liquids, gases and steam. The Orifice Flange Assembly operates on the principle of Differential Pressure, which is created due to increased fluid velocity leading to obstructed fluid flow. The Assembly Comprises : Orifice PlateOrifice FlangeCarrier Ring AssemblyD.P. Transmitter Availability : 1 ½� to 24� line sizes Why our Orifice Flange Assembly ? Measures to give acceptable uncertainty levelDurableLow maintenanceCost-effective Application Areas : Petrochemical plantsFertilizer plantsOil and gas industryDye industryPaper and pulp industryHeavy chemical plantsSugar industryPharmaceutical industry

Orifice Flange assembly is a primary flow element consisting of a tab handled square edged orifice plate and optional carrier. The orifice plate is designed and manufactured to meet the requirements in all respects and is suitable for the measurement of the rate of flow most liquids, gases and steam

or measurement of flow with reasonable accuracy and less cost, Orifice Plates and Assemblies can be used.For measurement of Flow with better accuracy and for more Pressure recovery, Venturi Meters can be used.

• Type: Flange tap , Corner tap , Radius tap (D & D/2 TAP)
• Line size: 15-1500mm (½"-60" NB)
• Accuracy: ±1 %
• Materials: A'l 05,A182 - F316,A 182 - F304.A182 - F5,A182 - F11,A182 - F22

An Orifice plate assembly provides maximum economy with minimum maintenance. It consists of orifice plate , studs , nuts , jack bolts & gaskets. Flanges are according to ANSI , DIN, JIS standards. Type of orifice flanges includes Welds neck , Slip on, RTJ and T & G.

• Material: Stainless Steel
• Size: 600 NB
• Packaging Type: Box
• Application: Industrial
• Country of Origin: Made in India
• Shape: Round
• Accuracy: 1/2 to 1%
• Surface Finish: Polished
• Brand: Veksler
• Features: Excellent strength, Easy installation

Very nominal cost compared to other flow elements, First Principle Device - Which never Fails, Proven Solution for Flow Measurement, Suitable for All Pipe Sizes from 12’’ to 36’’ .

The orifice plate with flange assemblies are employed for measuring the rate of flow or quantity of moving fluids like liquids, gases or vapours. When a device such as an orifice plate in a pipe line through which a fluid is flowing, as static pressure difference exists between the upstream side & the downstream side of the device is geometrically similar to one on which direct calibration has been made, the conditions of use being the same, the rate of flow may be determined from a knowledge of the circumstance under which the device is being used.

Available on Large Pipe Line Size of 1”NB to 24" NB Wetted Parts in M.S., S.S.304, S.S.316, Polypropylene etc.. Orifice Bore Calculation As per ISO 5167 Accuracy of ± 2% FSD.

• Line Size: 15 NB – 1500 NB (1/2” – 60”)
• Material: AISI 316, AISI 304, Monel, Hastelloy C
• Plate Types: Concentric square edge, Quarter of circle, Conical entrance, Segmental, Restriction, Eccentric
• Flange Type: Orifice Flanges (WNRF, WNRTJ, SORF, SWRF, Threaded)

STAR-MECH provides economical flow measurement products based on differential pressure principle, suitable to wide range of line size, pressure & temperature applications with service like any liquid, gas or steam. We also provide products for special applications required in the process industries. Apart from the materials mentioned any other material can be supplied on request. Products with IBR / NIBR option are available. An orifice plate assembly is a most widely used flow measurement product. STAR-MECH orifice plates are manufactured from finest material with close tolerance to match standards ISO 5167, BS 1042, API 2530 & AGA Report 3. Mounting between flanges or carrier ring(s) are available. The orifice plate assembly provides accurate measurement with no maintenance.

The Weld Neck Flange is normally referred to as "High Hub" flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange. The pressure tappings are provided through the flange which are at a distance of 1" from the face of the plate. The Plate Holder Assembly is a combination of plate holder and an Orifice Plate designed for Ring Tongue Joint (RTJ) Flanges. The plate holder has a function of holding the Orifice Plate and also function as a gasket to prevent leakage of the process fluid. The plate holder has an oval or octagonal ring for mounting between ring type joint flanges. This metallic sealing system is useful for a fluid of high temperature and high pressure. The pressure tapping system normally is of the flange tap type.

  Orifice Flange Assembly To measure differential pressure across the Orifice Plate, By-pass type flow measurement/ DP flow transmitters. Standard : According to ISO - 5167-2:2003 / BS 1042 Type : Socket weld / Weld neck type Size / MOC / Range : As per customer requirement.  

• Size: 2" to 24" Diameter

The orifice plate is an essential component used to generate a specific, predictable pressure drop in the system. The orifice plate with flange assemblies are used for measuring the rate of flow or quantity of moving liquids, gases or vapors. The orifice plates are designed as per international standards. The orifice plate portion of the assembly is made of SS 316 & 3.16 mm thickness.

Spraytech Systems orifice plate is a device used for measuring flow rate. Either a volumetric or mass flow rate may be determined, depending on the calculation associated with the it. It uses the same principle, namely Bernoulli's principle which states that there is a relationship between the pressure of the fluid and the velocity of the fluid. When the velocity increases, the pressure decreases and vice versa.

orifice flange assembly, Flame Arrester, Sight Glass