Orifice Meter Apparatus Dealers

• Voltage: 110V, 220V
• Condition: New
• Capacity: 40L/Hr, 20L/Hr
• Power: 0-100W, 400-800W
• Driven Type: Electric
• Warranty: 2yrs
• Ambient: 0-180 Deg C 180-360 Deg C

• Nozzle Length: 25 Mm And 50 Mm
• Features: Piezometer Tube To Measure Head,
• Driven Type: Electric
• Diameter of Orifice: 8.5 mm
• Payment Terms: T/T (Bank Transfer)
• Mouthpiece: 10 mm Brass

Our investment in the well-structured warehouse has paid off well. We have successfully installed up-to-the-minute warehouse management software to keep the entire lot in a safe and organized manner. With the aid of our well-established network and cordial associations, we are able to cater to the wide requirements of the buyers based in Bengaluru(India).

• Electric supply: 0.5 kW, 220V AC

The pressure tapings from the Venturimeter and Orificemeter are taken to differential manometer to measure pressure difference. The Venturimeter & Orificemeter are connected in parallel and anyone of them can be put in operation by operating valves provided at the downstream. These valves can also regulate the flow. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch Experiments To determine the co-efficient of discharged through Venturimeter and orifice meter.

• Voltage: 230V
• Country of Origin: Made in India
• Brand Name: Supersonic
• Phase: Single Phase
• Measuring Tank: 600 x 400 x 250 mm
• Capacity: 60 liters

• Brand Name: Steco
• Rectangular Notch: 50 mm wide
• Triangular Notch: 450 and 600 mm
• Sump Tank Capacity: 100 Litres MOC: 18 x 18 x 24 mm Electro- Plating Tank (PVC)
• Open Flow Channel: 250 x 200 x 1000 mm

the apparatus is used to calibrate the following types of notches: rectangular notch. triangular notch. trapezoidal notch or cipolletti weir.

• Capacity: 80 Ltr.

Orifice meter is a device used to measure the flow in a pipe. This apparatus is used to determine the coefficient of discharge coefficient of velocity. The system is closed circuit. A Centrifugal pump of 25mm x 25mm with 12 HP Motor (ISI – Kirlosker Make) M.S. Sump Tank 80 Ltr. to collect the water. M.S. Measuring Tank 30 Ltr fitted with piezometer tube to measure the discharge. Damper is used to collect the water in M.S. MEASURING TANK for certain time.

• Automation Grade: Semi Automatic
• Measuring Tank: 32 Liters
• Tank Material: PVC
• Pump: Monoblock Centrifugal Pump
• Sump Tank: 100 Liters

Storage Tank MS powder coated. Measuring Tank MS powder coated. Collecting Tank MS powder coated: Size of the collecting Tank is fitted with drain valve 1” size Mano meter Tube. With marking scale. Monoblock Pump 1ph, ½ HP pump. The equipment is a set-up used to study the performance of Orifice meter & Mouth Piece

Orifice Meter Apparatus Flow measurement by an orifice meter. manufacturing units, so as to have total control over quality and produciton.

advanced technocracy inc. is manufacturer, exporter & supplier of orifice meter apparatus. range of experiments: 1. flow measurement by an orifice meter.

Orifice meter apparatus, We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

• Brand Name: SLISCO
• Country of Origin: India
• Fuild mechanics and machinary equipment: Francis Turbine Test Rig
• Fuild mechanics and machinary equipment: Orifice and Mouthpiece Apparatus
• Fuild mechanics and machinary equipment: Bernoullis Apparatus

Product description:our company offers optimum quality orifice and mouthpiece apparatus at the most reasonable market price. This apparatus is manufactured under the supervision of expert professionals, using best quality raw materials. The apparatus manufactured by us is used for the purpose of measuring fluid flowing through an open channel. Offered apparatus is exclusively demanded in various hydraulic industries for accurate performance and hassle-free installation. experiments: � to determine the co-efficient of discharge of different orifice and mouthpiece utilities required: � electric supply 0.5 kw, 220v ac, single phase � water supply tap water connection � bsp distilled water @ 60 liters (optional) � floor area with drain facility technical specifications: � sudden enlargement: from 13 mm to 23 mm � sudden contraction: from 20 mm to 16 mm � electric supply: 0.5 kw, 220v ac, single phase

• Country of Origin: Made in India
• Brand Name: Steco
• Rectangular Notch: 50 mm wide
• Triangular Notch: 450 and 600 mm
• Sump tank capacity: 100 Litres 
• Open Flow Channel: 250 x 200 x 1000 mm

The unit consists of supply tank along with orifice and mouth piece fixed to the tank. A pointer is provided at the discharge of orifice to demonstrate & to determine X, Y co -ordinate of jet. FEATURES An arrangement to obtain a steady or quiescent flow. An arrangement to vary the head by changing the position of over flow pipe. Piezometer tube to measure head. An arrangement to measure co-ordinate of jet.   SPECIFICATION Main supply tank with orifice & mouthpiece fitting arrangement Size 400 x 400 x 600 mm with FRP lining Sump Tank – 900 x 400 x 400 mm with FRP Lining Measuring tank size – 300 x 400 x 300 mm Orifice 2 No.– Diameter of Orifice-8 & 10 mm, Mouth Piece - Diameter of mouthpiece 8 mm Length 25 mm Diameter of mouthpiece 10 mm Length 50 mm Tracer pointer with scale. Stop watch.

• • Measuring tank-: 295 X 345 X 345 mm
• • Sump tank-: 900 X 350 X 350 mm

Orifice-meter and Mouthpiece allows hydrologists and engineers a simple method of measuring the Coefficient of Discharge, Coefficient of Contraction and Coefficient of Velocity in variable heads. The apparatus is used to calibrate the following types of Orifice-meters and Mouthpieces:- • Orifice-meter - 16 & 12 mm • Mouthpieces - 18 & 14 mm

Orifice Meter Apparatus offered by us are in compliance with the set industrial standards. Our Orifice Meter Apparatus consists of a centrifugal pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop water circulation. Pressure and Vacuum gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and Digital Timer provided in our Orifice Meter Apparatus. Features: Water Circulation Closed loop. Compact & stand-alone set up MS Tanks with FRP Lining. Powder Coated Painted structure Simple to operate & maintain Specifications: Pump : ½ HP Centrifugal Pump. AC Motor : ½ HP 230V AC. Supply Tank : 120 Ltrs. Made of MS with FRP Lining. Measuring tank : 40 Ltrs. Made of MS with FRP Lining and fitted with piezo meter tube &&scale. Piping & Fittings : GI/PVC with necessary Valves. Fitted with U-Manometer with Mercury. Control panel : 1HP DOL Starter. Digital Timer : MCB Load and Line Indicator. Utilities Required: Electric supply Provide : 230 +/-10 VAC, 50 Hz, Single phase Electric supply with proper earthing. (Neutral . Earth voltage less than 5 VAC.) 5A,Three pin socket with switch for pump. Water supply Tap water connection ½. BSP

The apparatus consists of a pipe line contains one orifice meter. Orifice meter is made from clear acrylic. The pressure tapings from the Orifice meter is taken to differential manometer to measure pressure difference. A valve is provided at the downstream side of Orifice meter. The flow can be regulated by this valve Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watc