Oscillating Granulator Dealers

Oscillationg Granulator are available in various sizes, the most common size in 488mm width 510mm length, available from 0.5mm to 25mm holw diameter perforation the size below 0.5mm can be had in wire mesh design. These are availabe complete set of Certificates.

Oscillating Granulator equipment is generally used to render powders to a specific form that facilitates their flow ability and handling. We offer typical oscillating granulator machine for cosmetic, spices and pharmaceutical industries to formulate several ingredients like powdered incipient, small amounts of active ingredients and the liquid binder that locks the powder as granules to prevent segregation. In general pharmaceutical industries require separate equipments to pre-disperse, blend and to granulate various powders, but all these problems can be solved with our multi step granulator machine.

Oscillating Granulators are recommended where there is production of tablets or pellets. Used for both dry and wet granulation process, our Oscillating Granulators form better quality granules than Multi Mill, Comminuting Mill etc. All contact parts of our Oscillating Granulator are manufactured from stainless steel with mirror polish on them. It also features a unique oscillatory rotor action that makes sure that granulation is efficient in terms of quality and quantity.

We are the leading manufacturers and suppliers of Oscillating Granulator from Thane, Maharashtra. Oscillating granulator is used for granulating the material into desired particle size. The efficiency of our granulator is impressively high and the installation is very easy. The maintenance cost is also comparatively less and noise levels of the oscillating granulator are reduced as per the norms specified internationally.   Construction : Oscillating Granulator has one rotor with five edges, which oscillate on horizontal axis at about 180 per minutes. There is one half round sieve mounted at the bottom of the rotor. Product is charged from the top through in feed hopper and material falls on the rotor blades. The particles are broken by a set of oscillating bars arranged in cylindrical form over a screen of suitable mesh. Due to the sharp edges on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening.  It includes fine sieves, sieves, and perforated plates to meet the most demanding customer's requirements.   Salient Features Robust, Simple & Compact Design. Stainless Steel Construction. Easy Installation in Production Line. Oscillating Rotor Motion. High Output. Uniform Granules, Less Fines. Low noise level as per international norms. Maintenance Free. Easy for Cleaning.   Optional Features : Flame proof motor and Push Button Station. Inline granulation with Roll compactor & Tipper with FBD Bowl.   Safety Features : Limit switch at charging hopper & over load relay protection.

Salient Features: Sturdy and noiseless design. Easy to operate & maintain. Higher ratio of desired size granules can be obtained Continuous oscillating stirrer drive. Simple screen holding and tensioning device.

• Model: RDOG – Horizontal
• Hopper Capacity: 33 Liters
• MOC: Contact Parts SS 316 Non contact part 304, covered Cladded.
• Screen Size: 388 mm (w) x 762 mm (L)
• Stirrer size: Stirrer size
• No. of Oscillation: 110 per minute
• Output: 30 to 50 Kgs/hr (Depending on Material)
• Charging Height: 1135 mm
• Discharging Height: 655 mm
• Motor: 1 Hp/1440 rpm
• Motor Make: Crompton/Remi/Sabar
• Out Put: 75-200 Kgs/ hour (Depends upon mesh and Material nature.)
• Rotor Drive: Through Reduction Gear Box.
• Screen: Perforated type.
• Motor: 1.5 H.p. / 3.0 ph., 440 V
• AC Frequency Drive: (Optional): To vary the desired speed.

• Application: Industrial
• Weight: 100-500kg
• Voltage: 220V
• Power: 1-2kw
• Driven Type: Electric
• Automation Grade: Automatic

Multi Mill Machine, Tablet Coating Machine, Rotary Tablet Machine

Granulation: Mechanical process in which the product is pressed through a sieve with a specially shaped rotor-arm to obtain a desired particle size.  This process results in a narrow distribution spectrum as only the product having the right shape, size & position is broken & passed through the sieve Features :  ·         Robust, Simple & Compact design. ·         Stainless Steel Construction. ·         Easy Installation in Production Line. ·         Oscillating Rotor Motion. ·         High Output. ·         Uniform Granules, Less Fines ·         Low noise level as per international norms. ·         Maintenance Free ·         Easy for Cleaning.    Oscillating Rotor : The oscillating motion of the rotor improves the granulating process. This sensitive handling of the product emulates the hand operation of  an experienced pharmacist. One important feature of the oscillating granulator is the continuous variation of the speed & force applied to the material.  The back & forth motion of the  rotor results in an even distribution of the material.   Complete Stainless Steel.  All parts in contact with the product in AISI316 / 316L Inside polished Ra = 0.8 micron, outside ground (grain220)  Maintenance free design, GMP execution.

og - 200 and og - 400 for pharmaceutical, chemical, food and fertilizer industries. This machine can be used for dry and wet granulation and have a wide field of application.   salient features this machine gives high output with less percentage of fines robust simple and compact design easy installation in production line uniform granules maintenance free and can be attached with vacuum loading and discharge arrangement or gravity flow system. the granulating chamber and internal parts are totally washable from inside. the inner surfaces are mirror polished to prevent adherence of the product and facilitate cleaning. sliding rails and fast fixing devices allow easy mounting and dismantling of the accessories. granule size varies as per the perforation of sieves. the simple design of rotor and sieve mounting facilitates easy cleaning and quick change over. externally fitted bearing housings prevent the product coming into contact with bearing lubricants and hence the granules will be completely free of black particles. all the parts working on the materials being granulated can be easily and quickly dismantled for through washing without the use of spanners. lower guard of polished stainless steel & upper guards of acrylic material.   compared to other conventional models available, this machine is the best in terms of high output, minimum fines, low noise level while working, closed and compact to prevent powder leaking out, dust free operation, oscillates at low speed thus preventing excess heat generation and is designed for easy introduction in production line and continuous non-stop operation. The oscillating motion of rotor gives uniform granules with less fines. special features suitable for dry & wet granulation. easy for loading and unloading. easy for cleaning. all contact parts are made out of ss304 quality material. (ss316 will be provided on demand) robust, simple & compact design requires minimum maintenance. easy installation in production line. oscillating rotor motion. higher output. uniform granules, less fines. maintenance free.

• Screen area: 388 mm (W) x 762 mm (L)
• Output *: 30 to 90 Kgs./Hr.

If you are looking for high performance Pharmaceutical granulator machine than Ganesh technology is the right destination for all your quaries. We are supplier and exporter of all equipment related to solid dosage form department. Our line includes granulators, fluid bed dryers, powder mixing equipment, blenders, tumblers, Pharmaceutical siever machine and many more.

• Hopper Size: 35 Litres
• Screen Area: 388 mm (W)x762 mm (L)
• Stirrer Size: Ø 138 mm x 368 mm Length
• Oscilation: 110 per Minute
• Output *: 30 to 200 Kg/Hour
• Charging Height (mm): 1106
• Discharging Height (mm): 630
• Power Supply: 1 HP / 1440 RPM / 3 Phase
• Machine Dimension (mm): 710 (L) x 420 (B) x 1220 (H)

• Automation Grade: Semi Automatic
• Application: Making Granules
• Voltage: 220V

We are offering oscillating granulator. The machine is designed as per the “colton type oscillating granulator” and is especially suitable for wet granulation to facilitate thorough sizing of granules with minimum fines for better tabletting.

Oscillating granulator Oscillating Granulator has one rotor with five edges, which oscillate on horizontal axis. There is one half round sieve mounted at the bottom of the rotor. Product is charged from the top through in feed hopper and material falls on the rotor lades. The particles are broken by a set of oscillating bars arranged in cylindrical form over a screen of suitable mesh. Due to the sharp edges on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening, Does not generate heat or dust, ideal for sticky heatsensitive products.Output varies from 50 to 300 kg per hour depending on product and screen.

• Material: Stainless Steel
• Automation Grade: Semi-Automatic
• Voltage: 415 VAC
• Power: 1 HP
• Capacity: 30 to 200 Kgs. /Hr
• Frequency: 50/60 Hz
• Usage/Application: Industrial
• Charging Height: 1135 mm
• Screen Area: 388 mm (W) x 762 mm (L)
• Discharging Height: 655 mm

We are counted among one of the eminent manufacturers and suppliers of oscillating granulator,which is fabricated using superior quality stainless steel raw material. The products are suitable for wet and dry granulation process and are complete with suitable electricity. Further, the machines areequipped with motor, reduction gear box, quick opening and locking arrangement, for changing thesieves, machine duly painted and finished. Oscillating granulator, plays an important part in the process of granulation in tablet making. All contact parts made of stainless steel 304316 quality. Gmp model is also available.

High Speed Uniform Granulation ProcessApplication & Process :Oscillating granulator is used for gentle homogenization, size reduction, grading and sieving of dry, sensitive powders and granules in pharmaceutical, chemical and food industries.Oscillating Granulator has one rotor with five edges, which oscillate on horizontal axis at about 180 per minutes. There is one half round sieve mounted at the bottom of the rotor. Product is charged from the top through in feed hopper and material falls on the rotor lades. The particles are broken by a set of oscillating bars arranged in cylindrical form over a screen of suitable mesh. Due to the sharp edges on rotor, the downsizing of particle takes place and through sieve material gets pushed outward from the bottom opening.Features : Design is cGMP - Current Good Manufacturing Practices compliance All Product contact parts AISI 316 & non contact parts AISI 304. Uniformly granulation & fewer fines of wet material and dry materials. Rotor move oscillating motion with 180 stroke per minute. Easy to operate; move, clean, convenient, An Inline granulation & user friendly. Zero dusting & maintenance free.