Paper Band Filters Dealers

• Application: Industrial
• Power Source: Electric

Mag tools paper band filter unit is fabricated in steel. This entire unit is fixed on a coolant tank with a pump to supply coolant to the machine. The filtering paper is spread over an endless stainless steel mesh conveyor which is connected to a geared motor. This uniquely designed conveyor prevents overflowing of the liquid and the full width of the filtering paper is used. The movement of the filter paper is controlled by a float switch which actuates the geared motor. Mag tools paper band cum magnetic coolant clarifier involves our standard atp or tap model magnetic coolant clarifier. The powerful magnetic drum driven by a heavy duty geared motor designed to run continuously. The contaminated coolant liquid is first passed through the magnetic filter which separates almost 95% of the ferrous particles. The liquid further passes through filter which paper where all the nonferrous particles like grinding grit, stainless, brass or aluminum are filtered. As the porosity of paper gets filled up due to accumulates the liquid level rises. This triggers the float switch which starts the geared motor and fresh paper from the reel is pulled forward automatically. Now the liquid passes through the fresh paper and float switch shuts down the paper band cum magnetic coolant clarifier offer the excellent means of filtering both ferrous and nonferrous particles. Where high degree of purification id required and contaminates differ in from, size and composition. Paper band filtering system as a rule gives best results. Paper band filters are recommended for grinding, honing, transfer lines and machining center. It also can be used for rolling mills for filtering coolant which helps to improve the surface finish to the sheets. High efficient way of filtration guarantee fine finish, dimensional accuracy, increased tool life. Keeps your machine clean & reduces costly machine down time for periodical cleaning. Avoids bacterial growth and wastage of expensive coolants.

Our paper band filters are universally deployable felt filter units for the separation of hard substances from aqueous mediums. This System consists of two circular disc wheels duly mounted on central pipe connecting to hollow shaft. This keeps rolling on honey comb belt on the disc axis. Filter media is allowed to pass between disc and the honey comb belt with no relative motion. So perfect sealing is achieved for zero leakage and efficient Filtration. The dirty coolant is allowed to enter through the centre hollow shaft having multiple pouring slots inside for uniform distribution over the filtration bed. Good hydrostatic head results in building up of dirt Layer Cake with itself enhance the filtration efficiency. As soon as the dirty coolant increase it touches the sensor level, the level sensor signals geared motor to drive the Honey Comb Belt Allowing the new media to pass gradually inside for fresh filtration and at the same time to remove the used media along with the dirt cake. Filtered coolant comes out at the bottom in to the clean tank for pumping back to the machine.   Applications : Treatment of cleaning agents Recirculation of cooling lubricants Pre-treatment of waste water Separation of ferrite particles   MATERIAL OF CONSTRUCTION : C-steel, varnished RAL5010 or stainless steel 1.4301, unvarnished FLAME FELT : Material according to installation requirements SIZES : Sizes are available from 500mm Paper size to 1300mm Paper size.  Capacity : Up to 1200 LPM FILTRATION RATING : Filtration rating available from 15 microns to 60 microns

Udly paper band filter are designed for filtering ferrous & non-ferrous particle with high degree of purification using paper as filter media to increase life of coolant and improve surface finish of the product.

• Filter Type: Cartridge Filter
• Filter Medium Material: Metal
• Flow Rate (cubic meters/hr): 0-500

Clients can approach us for placing orders, timely deliveries of the same are guaranteed with us. Following the strict packaging guidelines, we make sure that the range of products we offer are packed sternly to evade loss/damage. By this, we ensure that the products are in safe condition during handling, warehousing and transportation.   Specifcation : As per customized Features : Corrosion resistance Sturdiness Durability

We are offering paper band filters. our paper band filters are universally deployable felt filter units for the separation of hard substances from aqueous mediums. This system consists of two circular disc wheels duly mounted on central pipe connecting to hollow shaft. This keeps rolling on honey comb belt on the disc axis. Filter media is allowed to pass between disc and the honey comb belt with no relative motion. So perfect sealing is achieved for zero leakage and efficient filtration. The dirty coolant is allowed to enter through the centre hollow shaft having multiple pouring slots inside for uniform distribution over the filtration bed. Good hydrostatic head results in building up of dirt layer cake with itself enhance the filtration efficiency. As soon as the dirty coolant increase it touches the sensor level, the level sensor signals geared motor to drive the honey comb belt allowing the new media to pass gradually inside for fresh filtration and at the same time to remove the used media along with the dirt cake. Filtered coolant comes out at the bottom in to the clean tank for pumping back to the machine. applications:  treatment of cleaning agents  recirculation of cooling lubricants  pre-treatment of waste water  separation of ferrite particles features : • drop centre paper band filter with automatic paper transport • filter felt laterally cleanly bound and sealed • optionally with magnet-barrel to separate ferrite particles • optionally with recirculation pump for the cleaned liquid • high efficient way of filtration guarantees fine finish, dimensional accuracy, increased tool life • keeps your machine clean & reduces costly machine down time for periodical cleaning • avoids bacterial growth and wastage of expensive coolants • where heavy stock removal increases the temperature of the coolant • this system of filtration due to sufficient exposure to air helps to control the same material of construction: c-steel, varnished ral5010 or stainless steel 1.4301, unvarnished flame felt: material according to installation requirements sizes: sizes are available from 500mm paper size to 1300mm paper size. flow rate: capacity: up to 1200 lpm filtration rating: filtration rating available from 15 microns to 60 microns

Fluid with dirt is exposed to finned magnetic separator first. After magnetic separation the fluid drops in paper band filter trough. A float-actuated clutch derives motion from a common drive & indexes dirty filter paper.  Applications : Suitable for fine coolant filtration for honing, grinding, lapping, gun drilling etc., for small individual machines. Features : • Very compact. Magnetic separator & band filter combination is accommodated within • 150 mm above the tank top, reducing the floor area for same volume of tank. • Band filter unit is mounted on rollers for ease of shifting during tank cleaning. • Common drive for magnetic separator & paper band filter, makes it economic. • No electrical panel hence reduced cost & maintenance. • Dirty filter paper is wound on a mandrel for easy disposal while the dirt collected is stored in a bin. • Absence of conveyer, shafts, rollers, makes it more maintenance friendly.     

Here a non woven ( paper ) fabric band is used as the filter media for the separation of the chips from the coolant / oil that is made to fall over it. The filter paper is stored as a roll on the unit and is pulled out by an endless chain belt on top of which the paper rests, after use of the front portion.   This filter is extensively used on grinding / honing machines for filtering cast iron / aluminium / fine steel particles from coolant, where coolant filtration is critical. Filtration levels of 5 to 40 microns are possible. There is no cleaning of filter needed except change of filter paper roll after a long roll of paper ends. When the paper roll ends, an optional “paper end” signal can be provided to fix a new roll.  We manufacture two types of paper band filters namely : Manual indexing paper band filters: Here the indexing ( linear movement ) of the used paper is done manually using a handle & fresh paper is pulled from the roll. Auto indexing paper band filters: Here the indexing ( linear movement ) of the used paper is done automatically & fresh paper is pulled from the roll. 

We are offering industrial paper band filter. Our industrial paper band filter is mainly used for the purpose of filtering the coolant generated from machines while grinding steel, cast iron, brass, copper & aluminum. These filters are used where high degree of purification is required in different sizes, forms and compositions of coolant. Our filter gives the best result in surface finish of the component. features compact and module designsimple handlingeasy maintenance specifications it filters the coolant up to 15 micron to 50 micron depending on the filter mat.it can be used to filter the coolant from 100 to 2000 l/min.

Our Paper Band Filteris universally deployable felt filter unit for the separation of hard substances from aqueous mediums. The Paper Band Filter consists of two circular disc wheels duly mounted on central pipe connecting to hollow shaft. This keeps rolling on honey comb belt on the disc axis. Filter media is allowed to pass between disc and the honey comb belt with no relative motion. So perfect sealing is achieved for zero leakage and efficient filtration. The dirty coolant is allowed to enter through the centre hollow shaft having multiple pouring slots inside for uniform distribution over the filtration bed. Good hydrostatic head results in building up of dirt layer cake with itself, which enhances the filtration efficiency. As soon as the dirty coolant increase it touches the sensor level, the level sensor signals geared motor to drive the honey comb belt allowing the new media to pass gradually inside for fresh filtration and at the same time to remove the used media along with the dirt cake. Filtered coolant comes out at the bottom in to the clean tank for pumping back to the machine. Features : Drop centre paper band filter with automatic paper transport Filter felt laterally cleanly bound and sealed Optionally with magnet-barrel to separate ferrite particles Optionally with recirculation pump for the cleaned liquid High efficient way of filtration guarantees fine finish, dimensional accuracy, increased tool life Keeps your machine clean & reduces costly machine down time for periodical cleaning Avoids bacterial growth and wastage of expensive coolants Where heavy stock removal increases the temperature of the coolant This system of filtration due to sufficient exposure to air helps to control the same Technical Specifications : Material of construction : C-steel, varnished RAL5010 or stainless steel 1.4301, unvarnished Flame felt : Material according to installation requirements Sizes : Available from 500mm Paper size to 1300mm Paper size. Flow rate : capacity up to 1200 LPM Filtration rating : Filtration rating available from 15 microns to 60 microns

“Sepro Compact Band Paper Filter” is an endless sturdy metal-jointed band conveyor, fitted to form a semicircular loop between two rotating disc wheels. The filter paper is inserted between the Disc Wheels and the tensioned conveyor. The medium to be filtered is introduced into the tank through the central inlet pipe. By positioning the pipe centrally, the medium to be filtered can be received directly from the machine by gravity into the filter unit. The structure does not require a lift pump.

• Features: Superior quality, Assuring excellent performance, Superior durability

PAPER BAND FILTER  The paper band filter is a combination of a wire supported mesh with straight rod conveying the filter paper as the filtration medium. This is the fully automatic & includes a clean coolant tank, dust bin, non woven synthetic filter fabric (normally called as filter paper) driving system, control system.  Flow rates from 40 to 850 litres/min.  Various grades of filter media. Integral coolant pump option Gravity feed from as little as 400mm from floor level. APPLICATIONS :-  For the separation of particles from all types of liquids.  Machines such as grinding machines, washing machines,lathes, rotary and inline transfer machines, honing machines, tube drawing machines, process waters and all types of solidsliquid separation.  Water treatment and effluent control, etc. ADVANTAGES:-  Low Running Costs The power required is minimal, as the filter only operates when the filter medium is contaminated, so only operates a few times a day. Rolls of filter paper may last many months and are competitively priced.  Easy to Install The unit is free-standing and only needs gravity inlet connection, return pipework to the machine (flexible or rigid pipe) and a mains electrical connection. In all, three to four hours work.  Liquid Life Coolant life is greatly extended with reduced topup.  Bacterial growth is inhibited by the efficient removal of contamination  Labour Saving The roll of filter paper and collection bin only require occasional attention. PRINCIPLES OF OPERATION:-  The coolant enters the filter via a flow dispenser and falls directly onto the filter media bed, which is retained in a pool state by an endless steel mesh belt. The coolant passes through the media which retains the solids and flows directly into the clean tank where it can be pumped back to the machine head. When the media is contaminated, the liquid level rises raising with it a ball float, which in turn actuates a switch and causes the endless belt to move forward via a reduction geared unit. The contaminated filter media is discharged into a waste bin. Whilst the belt is moving forward, the clean media is brought on, thus allowing the coolant to pass freely and the float to fall.

• RANGE: 5 to 40 microns

A non woven ( paper ) fabric band is used as the filter media for the separation of the chips from the coolant oil that is made to fall over it. The filter paper is stored as a roll on the unit and is pulled out by an endless chain belt on top of which the paper rests, after use of the front portion. This filter is extensively used on grinding honing machines for filtering cast iron aluminium fine steel particles from coolant, where coolant filtration is critical. Filtration levels of 5 to 40 microns are possible. There is no cleaning of filter needed except change of filter paper roll after a long roll of paper ends. When the paper roll ends, an optional “paper end” signal can be provided to fix a new roll.

We manufacture eco type paper band filters that are mounted on rollers for ease of shifting during tank cleaning. They do not have any electrical panel. The dirty filter paper is wound on a mandrel for easy disposal while the dirt collected is stored in a bin. They are suitable for fine coolant filtration for honing, grinding, lapping, gun drilling, etc. For small individual machines. Working fluid with dirt is exposed to finned magnetic separator first. After magnetic separation the fluid drops in paper band filter trough. A float-actuated clutch derives motion from a common drive & indexes dirty filter paper.

• Certification: CE Certified
• Application: Filtering Coolant
• Weight: 100-200kg
• Voltage: 110V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

We offer effectual Paper Band Filter to the clients. Wide range of Paper Band Cum Magnetic Filters is fabricated by us as per the industrial specifications. Manufactured using sophisticated technology, our Paper Band Filter is appreciated for its flawless performance and high durability. With such features, the cost-effectiveness of our Paper Band Filter ensures high satisfaction of the clients. Working These Paper Band Filters are fixed on a coolant tank with a pump that supplies coolant to the machine. Then the filter paper is spread over an endless stainless steel mesh conveyor that is connected to a geared motor. Furthermore, these conveyors prevent the overflowing of liquid and control the movement of filter paper by a float switch that actuates the geared motor. Features Compact designThe system is normally mountable to the existing tank availableAvailable in various grade of filtrationThe system does not require any manual attention

Band filter are the simplest and oldest form of filters. Veeraja ECO Band filter is one more step towards additional simplicity. This band filter does not have a moving conveyor. This eliminates the maintenance concerns of jamming and breaking of conveyor. A standard magnetic separator can also be added to improve on the efficiency of the band filter. Filter media is laid on conveyor. This is fitted on tank. Dirty fluid drops on the media. Clean fluid is collected in the tank below and pumped back. When media chokes, level starts rising above the media. This is sensed by a level switch. Dirty media is conveyed out by geared motor.     Types Of Paper Band Filters Eco Type Paper Band Filters Conveyor Type Paper Band Filters Applications  Diesel Injector Nozzle  Cylinder Liner Honing  Ball Bearing  Taper Roller Bearing  Cylindrical Bearing  Tapping  Crankshaft Cast Iron Machining   Piston Rod Grinding  Water pump shafts Grinding  Diesel Injection Nozzle Grinding  Cylinder Head Cast Iron Machining  Cylinder Block Cast Iron Machining  Breakliner Cast Iron Machining  Bearing Inner Race and Outer Race Grinding 

• Filtration capacity: 50 l/min to 300 l/min.

Band filter are the simplest and oldest form of filters. Veeraja ECO Band filter is one more step towards additional simplicity. This band filter does not have a moving conveyor. This eliminates the maintenance concerns of jamming and breaking of conveyor. A standard magnetic separator can also be added to improve on the efficiency of the band filter.

• Power Source: Electric
• Flow Rate: Upto 1200 LPM
• Automation Grade: Automatic
• Frequency (Hz): 50 Hz
• Brand Name: Drasla
• Material: Steel
• Paper Size: 1300 mm

We are leading Paper Band Filter supplier in Pune. our product is suitable for excellent filtration, Compact design, Efficient filtration. which are available at a wholesale rate.

• MOC:: SS 304
• Conveyor:: Honey Comb Conveyor
• Capacity:: 100 LPM - 500 LPM

Band filter are the simplest and oldest form of filters. This entire unit is fixed on a Washing Solution tank The filtering paper is spread over an endless stainless steel mesh conveyor which is connected to a geared motor.   Applications       Paper Band filter is used in Parts Washing/Component Washing where High Precison Millipore cleaning is required.

• Type: Paper Band Filters

Compact & Paper  Band Filters are used for filtration of contaminated coolant coming out of any CNC machine tool. These machines offer better filtration and efficiency compared to standard paper band filters because of the design. U-Tech Compact Band Filter offers a very high degree of reliability and guarantees that the coolant will be filtered with the least use of filter paper and motor power.Features ·       Occupies less space, only 1/3rd of conventional paper band filter ·        Paper Lasts Longer, and hence more time interval between paper changes ·        Can filter coolant and oil with ferrous and non-ferrous metal and non-metal materials ·        Clean coolant to provide brilliant surface on the workpiece

We are dealing best paper band filter.