Passive Harmonic Filter Dealers

Our company is a reputed Manufacturer, Supplier and Exporter of Passive Harmonic Filter from Surat, Gujarat. Fabricated using high-grade components like resistors, capacitors, etc., our Harmonic Filter is preferred by many industries all over the world. We are proficient in handling bulk orders of Passive Harmonic Filter and ensuring their timely delivery. Highlights : Passive Harmonic Filters are constructed from a combination of power components including resistors, inductors and capacitors In power systems, simple passive filters are usually constructed from capacitors and inductors, and are tuned for a specific frequency of interest Passive filters provide an extremely cost effective solution to harmonic problems at all voltage levels Passive Harmonic Filters are applied extensively at distribution and transmission voltages across the world   Application : Harmonic filtration / mitigation solution Standard compliance: IEEE 519-1992 Passive component: heavy duty / super heavy duty capacitors Harmonic filter low loss iron / air core reactors Wide range from 230V to 33KV Single and double tuned filtration   Features : Customized design as per harmonic pattern Most suitable for fixed non linear load Available in series and parallel combination Power loss : maximum 2-3% of full load Class F insulation Load base ON/OFF control provision in LV system Back up Fuse / MCCB protection in LV and HRC fuse/VCB protection in HV system All electrical parameter measurement provision like V, I, KW, KVAR, VTHD, ITHD, PF etc… Long service life of more than 10 years Cost effective solution in comparison with AHF Available solution with air core and iron core type reactor, inductors available with Al. (up to certain rating) and Cu. Winding Forced cooling provision with fan controlling by thermostat Enclosure with CRCA sheet and seven tank treatment for anti rusting and powder coated with IP 42 for indoor application and IP 65 for outdoor application Design possible up to THDi < 5% Meeting power quality standard IEEE519-1992 Harmonic filters with 1 year warranty No air conditioning required Manufacturing as per relevant national and international standard

• Power Source: Electric
• Material: MS
• Usage/Application: Industrial
• Ambient Temperature: 50 Degree C
• Frequency: 50/60Hz
• Rating: 50 to 4000Kvar
• Voltage: 400/440/480/525/690/800/1200V
• Mode of Switching: Contactor/Static

• Application: Electricals Use
• Warranty: 1yr
• Size: As per client requirement
• Material: SS
• Aluminum: 7 percent
• Copper: 14 percent

• Type: Harmonic Filters
• Application: Electricals Use
• Color: Grey
• Voltage: AC
• Frequency: 50hz
• Automatic Grade: Automatic
• Warranty: 1yr

Helps meet IEEE-519 requirements Gurantees THDi performance of 8% Max at 50% load, 5% Max at full load Meets the voltage and current distortion limits of IEEE-519 Saves energy by eliminating the wasted energy associated with harmonics, therefore reducing the true RMS KVA demanded from your power source. Suitable for speed controllers or inverters Reduces energy costs Increases equipment reliability by absorbing transients and voltage surges Increases equipments life by reducing heat associated with harmonic currents Improves power factor Reduces THD-V to meet power quality standards. Categories: Power Quality, Power Quality Solutions   Most of the mentioned filtering techniques have common drawback of higher cost compared to Passive Filtering techniques. Consequently, the harmonic filtering techniques to a large extent are still the most commonly used techniques for current harmonics mitigation of 6-pulse front-end diode rectifier application. We have developed an efficient Passive Filter, which can suit many such similar loads. Since all filter components are passive they are rugged, maintenance free, reliable and low cost. Moreover, the filter implementation procedure is relatively easy. With simple structure, our Passive Filters have been extensively used for VFD harmonic mitigation. No involvement of electronic circuits, hardware and complicated control algorithms. Hence, our Passive Harmonic Filters are relatively inexpensive means for eliminating current harmonics distortion and improving the system power factor. Because of these two in one improvement our broad band filters usually have edge over the other effective filtering methods.

• Brand Name: AB Power
• Material: Mild Steel
• Power Source: Electric
• Features: High performance, Excellent finishing, Highly reliable .
• Frequency: 50 Hz
• Phase: 1/3

• Voltage: 220-240 V
• Frequency: 50 Hz
• Power: 1.5 kW
• Power Source: Electric
• Automation Grade: Automatic
• Minimum Order Quantity: 1 Onwards

• Features: Strong construction, Longer service life,Outstanding functionality

• Input Power: 3 KW to 300 KW
• Efficiency: 98 %
• Rating: 415 V +/-10%
• Voltage: 415-440 VAC
• Frequency: 50-60 Hz +/-2%
• Operating Temperature: -20 deg C to 40 deg C
• IP Rating: 30/40/54 IP
• THDi: Less than 5%
• Accuracy: 100
• Display Size: 7 inch Color touch Screen
• Item Code: BITCON-BBPF

The HTS not only limits current distortion to less than 8% (5-6% typical on 100%Load), it also corrects power factor to 0.99 (near unity at 100% load).

Most of the mentioned filtering techniques have common draw back of higher cost compared to passive filtering techniques. Consequently, the passive harmonic filtering techniques to a large extent are still the most commonly used techniques for current harmonics mitigation of 6-pulse front-end diode rectifier application.

Key Features: Treats harmonics generated by 6 pulse ASDs. Operates within 25% to 100% of load current. Power Quality analyzer included. Switching devices for filters in case of low load conditions included. Remote monitoring of equipment performance possible input current THD < 8% (typically 5% to 6%) over the entire operating range. High quality German Filter grade capacitors from Electronicon and Epcos. Improvement in TPF due to removal of Harmonics.

Passive Tuned Harmonic filters consist of capacitors connected in series with Reactors. The system provides reactive power at the fundamental frequency & Harmonic Filtration at tuned frequencies. A typical Harmonic filter consists of series resonant circuits tuned to the prevalent harmonics (5th, 7th, 11th & 13th order harmonics). Harmonic filters are custom designed for each application. This Ensures that the best possible power factor correction and filtering characteristics are achieved with a reasonable investment. This helps in reducing the THD in the system as per Relevant Passive Tuned Filter Standards like IEEE-519 / 1992 & guidelines of CEA & other utilities.

A passive harmonic filter is built using an array of capacitors, inductors, and resistors. It can take the form of a simple line reactor or may use a series of parallel resonant filters to eliminate harmonics. Passive harmonic filters are also divided based on the way they are connected with the load.   A series filter: Here the filter is placed in series with the load and uses parallel components, i.e., inductors   and capacitors are in parallel. This filter is a current rejector.   A parallel filter: The filter is placed in parallel with the load and its components are built in series. This   filter is a current acceptor.   Based on the components used to build the passive filter, there are the following types       A Band-pass filter is a common passive filter that is built using a capacitor connected in series with a   resistor.   A High-pass filter has a resistor connected in parallel with a reactor. This helps in reducing the q value of   the filter, which will in turn help reduce the higher frequencies.   A High-pass filter when used in combination with a band-pass filter will provide a solution for medium   voltage and sub-transmission voltage networks, which have moderate harmonic distortions.   A C-type filter is used for complex loads, cyclo converters and electric arc furnaces and is a special   variation of the high pass filter. This filter will provide the load with reactive power and avoid forming parallel resonance circuits with the load.

• Country of Origin: India
• Brand Name: EMIS

Passive harmonic filter designed and manufactured to provide an economical solution in harmonic mitigation in Power Systems by maintaining THID 5% in compliance with current and voltage requirements of IEEE 519.

passive harmonic filters, Power Modules, Battery Backup Drive

passive harmonic filters, maintenance free earthing electrodes

passive harmonic filters, oil circuit breakers, switchgear amc services

passive harmonic filter, Harmonic Filters, Active Harmonic Filter