Peel Strength Tester Dealers

  Our Bond strength tester is handy instrument to measure bonding strength of any textile / coated material. Example : Bond strength of fusing interlining with base fabric can be measured or bond strength in coated / laminated fabric can be measured. Good Instrument to measure efficiency of fusing machine / laminating or coated machine. Max capacity - 3kg, Accuracy – 25 gms. Digital Handy model and fixed floor model are also available. Long Gripper is provided to hold the test specimen accurately.

• Brand Name: Mecmesin
• Place of Origin: United Kingdom

Adhesive strength is measured for many purposes. Some bonds are designed not to break in use (e.g. construction materials), some are designed to allow separation in normal use (e.g. a foil lid), and others are designed to be resealed a number of times (e.g. resealable bag tape). Some things peel without a separate adhesive layer, such as an induction-welded foil, or grip seal bags, and some adhesive joins for security come apart but must not reseal. Adhesive bonding can be measured by tensile testing, shear testing or compression testing, but where there is flexibility in a joined layer, a peel test is appropriate. A universal tester can be used for any peel test. It will capture high frequency data points, and produce a characteristic curve that will show the strength and evenness of the adhesion. The advantage of using a Mecmesin universal tester is that it can also be used for adhesive shear and compression tests, or coatings pull-off tests

• Type: Peel Strength Tester
• Condition: New
• Warranty: Lifetime Buyback Warranty
• Certification: ISO 9001:2008 Certified
• Country of Origin: India
• Brand Name: Paramount

Peel strength is the average load per unit width of bond line required to separate bonded materials where the angle of separation may be 90° or 180°. Peel-Bond Tester is robustly constructed to determine the adhesive or bond strength between two materials. The tester imanufacturedin accordance with the set industry norms using optimum quality components. Paramount Peel-Bond Strength Tester i9™ (Dial Type) determines the strength required to separate fabric within terlining / fusing. Long probe is provided to hold the test specimen accurately. The force gauge attached measures the force required to pull the bonded material layer from a base material in Newton. Manual action allows fine positioning and better motion control .Compact, lightweight, bench top innovative design minimizes maintenances process.

• Max. Force: 200 kg (2KN)
• Stoke: 900mm including fixture
• Load cell Resolution: 1/100,000
• Load Precision: ≤0.5%
• Test speed: 50
• Data display: Max. force, speed, sample information, strength(Kpa, Mpa, N/mm, N/mm2) etc

• Power: 220V,Single Phase,50 Hz
• Country of Origin: India
• Load Cell Capacity: 20 kgf
• Display: LED (digital)
• Accuracy: ±0.5% within entire range.
• Least count/Resolution: 0.002 kgf
• Speed: 300mm/min±5%

The Peel Seal Adhesion Strength Tester is an innovative instrument which helps in measuring the adhesion strength or peel ability of self-adhesive pressure sensitive materials. Peel adhesion is defined as the force required to test the strength of the adhesives. The instrument consists of two jaws that are used for holding the sample . The specimen is placed between two movable clamps. This applies a force on the sample and peels it off from the surface. The force that is required to peel off the sample from the surface is recorded by the highly accurate load cell given with the equipment. The force applied is displayed on the digital display provided the machine . This instrument hence can provided the most accurate data analysis so that the manufacturers could provide the best quality to their customersThe peel strength tester is one of the most popular testing instruments that is used in the packaging and adhesive industries to test the strength of the adhesives. The following test can be  conducted on  one single instruments Adhesive strength test Peel strength test   Seal strength test Bond strength test Features : Microprocessor based display for accurate test result Display for peel adhesive strength of test specimen Strong Gripping clamps to perform peel test at 180⁰ Dimensions: 600*500*1200 Material: Powder coated mild steel Optional and Additional Accessories : Computerized model Speed drive for accurate result 90⁰ Fixture

• Voltage: 220V
• Frequency: 50 Hz
• Features: Sturdy construction, Precisely engineered, Resistant to corrosion, Long service life .
• phase: Single phase
• Brand: NTF
• Capacity: Upto 50 Kg 

Specifications: Size: Customized Weight: 100-500Kg Elongation Accuracy: 0.001mm Request Callback Additional Information: Item Code: GE-4056

• Separation: 90 degree
• Mechanism: Single column
• System Status: Computerized + Digital 

• Voltage: 220 V AC 
• Country of Origin: Made in India
• Brand Name: Micron
• Phase: Single Phase
• Features: Sturdy construction, Precisely engineered , Resistant to corrosion, Long service life
• Material: Steel
• Power Supply: Electric
• Capacity: 50 Kg

• Voltage: 220 V AC
• Material: Mild Steel
• Phase: Single Phase
• Capacity: 50 Kg
• Battery Life: 4 hours

• Brand Name: V2 Digital
• Country of Origin: Made in India
• Item Code: 9024
• Battery Life: 4-5 Hours
• Material: Plastic ABS

• Country of Origin: India
• Type: Peel Strength Tester
• Color: Blue and White
• Condition: New
• Brand Name: IKON INDUSTRIES
• Color: Blue and White
• Certification: Traceable to NABL
• Power: 5 AMP
• Voltage: 230 Volt
• Frequency: 50 HZ
• Display: Digital

• Clear Distance: Maximum up to 250 mm.
• Resolution: 1 gram

NAUGRALABS LABORATORY PRODUCT NAME: PEEL OFF STRENGTH TESTER FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-440001 Description and Specification for Lab Tenders Peel Off Strength Tester For Testing Lab Workshop. Peel Off Strength Tester - For Testing Lab We offer Peel Off Strength Tester, to test the self-adhesiveness of foam sheet. The strength of adhesion of self-adhesive foam sheets to the substrate is determined by pasting a rectangular test specimen cut out of the sheet under test over a smooth glass surface, pressing it down with the help of rubber-lined metal roller, and peeling off one of its ends from the substrate at an angle of 180° at a constant speed with the help of a motorized arrangement.   The force needed to peel off the test specimen gives a measure of the peel strength of the foam sheet under test. civil lab equipments manufacturers

• Frequency: 50/60 Hz
• Voltage: 220-230 V AC
• Country of Origin: Made in India
• Features: Large Working Area, Flexible and Accurate Load measurement, Simple plug and use, Ergonomically designed, PC integration.
• Brand: Lloyds
• Capacity: 20 kgf
• Testing Speed: 15 mm/min Fixed
• Speed Accuracy: Less Than 0.2%
• Load Cell Accuracy: +/- 0.5% of readings
• Digital Functions: Tare, Peak, Calibration
• Data Sampling Rate: 500 hz
• Output: Rs 232 Serial Data
• Model Name: DBST 92N

• Power Consumption: 0.5 Kw
• Cross Travel: 1000 mm
• Speed: 10 – 500 mm/min
• Load Cell Capacity: 20 Kgf
• Standard :: 500 mm
• Very Long :: 750 mm
• Extra Long :: 1000 mm

This Peel Testing Equipmentcan do tensile test, tear test, peel test, bond test with different clamps for yarn,paper, tape, film,rubber and other kind of materials. unversal test equipment uses the motor to drive screw to move fixtures. Fix sample between upper and lower fixture and pull sample by the upper fixture upward with specified speed. The load cell connecting with upper fixture will sense the force and then convert it into voltage sign to the display screen. Force value will be displayed automatically on the screen.   Applications: Deformation under defined load: Test deformation under defined load of tested sample Load under defined deformation: Test load under defined deformation of tested sample Software can issue report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc. This machine can do different test as per customer requirement such as peel test, tear test, compression test, bend test with different clamps.

• Driven Type: Electric
• Color: Brown
• Condition: New
• Power: 1-3kw
• Load Cell Capacity: 20Kgf
• Grip Separation: Min. 25 mm & Max. 300 mm
• Dimensions: 600 x 524 x 1216 mm
• Features: Bright LED display, Inbuilt calibration facility, Feather touch controls
• MODEL: PPSS-2020 S

Peel Strength Tester is a consistent tool to quantify the permanence of adhesion or peel ability of self-adhesive pressure sensitive materials. Peel strength testing is important in the evaluation of adhesive bonding of materials in various industries. It will determine the force required to peel two materials apart from each other, which can provide information about the adhesive strength and the quality of the bond between the two materials. Thus, to test the peel strength of the materials, we at Presto have designed a high-quality lab testing instrument known as a peel strength tester. This quality testing equipment will accurately assess the peel adhesive material and quantify the permanence of adhesion. It is is manufactured under test standard ASTM D 903, ASTM D3330 , ASTM F88 and ASTM F904. Presto is a leading peel tester manufacturer and offers this quality testing instrument at the best and most affordable price. This lab testing instrument is designed to deliver highly accurate results under force, ensuring that the measurement is both reliable and repeatable. The strong gripping clamps are specially designed to perform peel tests at 180 degrees, which is the standard angle for most peel tests. The Presto Peel Adhesion Tester also comes equipped with an inbuilt calibration facility, which allows for easy and quick calibration of the instrument to ensure the accuracy of the results. This feature ensures that the tester always delivers precise and reliable data, providing peace of mind to the user.

• Frequency: 50/60 Hz
• Voltage: 220 V
• Brand: Imada
• Material: Mild Steel
• Display Type: Digital

• Power Consumption: 0.5 Kw

Presto’s Peel AdhesionBondSeal tester is used to calculate the permanence of the adhesion ability of self adhesive force sensitive products. The adhesion strength of a product is defined as the pressure required for separating a coated substance, which has been applied to normal test plate under specified circumstances, from another plate placed at a specified angle with predetermined velocity. The product is designed and manufactured as per international standards. The Peel strength tester is ideal for measuring tear, peel and other frictional properties of adhesives, laminates, glues, fabrics, packaging, coatings, tapes, labels, and other products components and materials. With the sealbond strength testing instrument, one can accurately measure the average peel strength load over a specific distance per unit width of adhesive. The machine provides a constant rate of extension, constant rate f load control which allows you to perform numerous peel and seal tests with a single machine.