Pelton Turbine Test Rig Dealers

We undertake online payment procedures which are completely safe and hassle free. The online transactions are supported by advanced security features. Every item in our range is manufactured utilizing premium supplies sourced from renowned traders. Therefore, our products are reliable.

• Type: Pelton Turbine Test Rig
• Weight: 100-400kg
• Voltage: 110V
• Application: Industrial Use
• Power: 1-3kw
• Capacity: 2 HP (Closed Circuit)

In order to ensure the safety of the products, we carefully store the lot under hygienic conditions and safe environment. Moreover, the lot is stringently and regularly checked by the experts. Fret not! We are here to help you out with the payment procedures. Be it online or offline payment method, we are here to assist you all the way through the payment process. Specifications : This Pelton Turbine Test Rig 65mm size to develop 2 HP at 1000 RPM with a flow of about 450 Ipm at 30 meters supply head-Supply pump set suitable for supplying water to the above turbine Monobiock Centrifuge) l\imp - (5 HP, 3 Phases, 440V) Pump Size - Suction size 50mm & Delivery size 40mm Pump Discharg - 420 LPM Delivery Head - 27 meter RPM - 3000 RPM Sump Tank : MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 650 Ltr. Runner coupled to pelton wheel. Rope Bake Dynamometer is used to measure the output Runner diameter 220mm. Spring Balance 6 kg (Salter Make). Discharge Butter Fly valve used to control the flow-rate of water. Pressure Gauge of 4.2 kg/crn2 is used to measure the pressure head. Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation Switch and starter suitable for above motor pump set mounted on the control panel board. Experimental Capabilities : To determine the efficiency of Turbine To draw the characteristics curve of Turbine

• Weight: 100-400kg
• Voltage: 220V
• Application: Industrial Use
• Power: 1-3kw
• Automation Grade: Automatic
• Utilities Required: Water Supply and Drain.
• Electricity: 15 kW, 440V AC, Three Phase

We bring forth premium Pelton Wheel Turbine Test Rig in India. Our Turbine Test Rig is specially designed for experimental purposes in laboratories. Our Turbine Test Rig is manufactured as per the international quality standards and premium components to ensure high durability. We make available Pelton Wheel Turbine Test Rig with different technical specifications according to the requirement of buyers. Buyers can acquire Pelton Wheel Turbine Test Rig from us at affordable price.Experiments :        To study the operation of a Pelton Wheel Turbine        To determine the Output Power of Pelton Wheel Turbine        To determine the Turbine Efficiency

We are bracketed among the distinguished Manufacturers and Suppliers of Pelton Wheel Turbine Test Rigs. Our unit shows the construction and working of Pelton Wheel Turbine. It consists of Pelton wheel rotate by the jet of water supplied from centrifugal pump. Rope break dynamometer is used to measure the output of turbine. Pressure Gauge and Orificemeter are used to measure the input of turbine   Specifications : This Pelton Turbine Test Rig 65mm size to develop 2 HP at 1000 RPM with a flow of about 450 Ipm at 30 meters supply head-Supply pump set suitable for supplying water to the above turbine Monobiock Centrifuge) l\imp  -  (5 HP, 3 Phases, 440V) Pump Size  -  Suction size 50mm & Delivery size 40mm Pump Discharg  -  420 LPM Delivery Head  -  27 meter RPM  -  3000 RPM Sump Tank : MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 650 Ltr. Runner coupled to pelton wheel. Rope Bake Dynamometer is used to measure the output Runner diameter 220mm. Spring Balance 6 kg (Salter Make). Discharge Butter Fly valve used to control the flow-rate of water. Pressure Gauge of 4.2 kg/crn2 is used to measure the pressure head. Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation Switch and starter suitable for above motor pump set mounted on the control panel board Experimental Capabilities : To determine the efficiency of Turbine To draw the characteristics curve of Turbine

• size: 50mm
• speed: 3000 RPM

Pumps, This unit are a self-contained recirculation type unit. All the measurements are provided to evaluate the performance of the pump. The system is closed circuit. Water supplied from centrifugal pump. Rope break dynamometer is used to measure the output of turbine. Pressure Gauge and Orificemeter are used to measure the input of turbine. The system is closed circuit. Sump Tank: Fiber glass lined MS Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 300 Liter.

The present set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through SS nozzle with a SS spear, by means of Centrifugal Pump, tangentially to the runner. Flow of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets.

• Floor space: 2m x 1.5m (approx)

The ‘Swarg Systems & Instruments’ apparatus consists of a small Pelton wheel connected to a rope brake. Water is supplied to the turbine by a centrifugal pump. Water flow is measure by a venturimeter and a mercury manometer. Water jet is directed over the buckets by a nozzle & a spear operating inside the nozzle controls the water flow. Thus the students can visualize the operation & estimate B. H. P. & W. H. P. and various efficiencies of Pelton Turbine.

• Brand Name: Mechmatics,Mechmatics
• Motor: 5 HP
• Pump Block Type: Monoblock
• Sump Tank Capacity: 200 lits

Pelton turbine test rig , We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

• Power: 1 KW
• Condition: New
• Application: Educational Equipment
• Speed (RPM): 750 Rpm
• Frequency: 10-12 Hz

• Brand: Eletech-Eletech Lab Instruments
• Model No: ELI-1904
• Speed: 2000 rpm
• Torque: 20N
• Drum radius: 30mm
• Water Tank Capacity: 130L
• Power Requirements: 440V AC
• Category: Civil Lab
• Tag: Pelton Wheel Turbine Test Rig

• Space Required: 2.5m. x 1.5m.

This equipment is designed FOR GIVING THE VISUAL DEMONSTRATION OF WORKING of a Pelton Turbine. Also to study performance characteristics, effect of discharge, velocity of impinging water on turbine, of a Pelton Wheel Turbine.

• Country of Origin: India
• Type: Pelton Turbine Test Rig
• Brand Name: UMI
• Application: Industrial Use

- FRANCIS TURBINE TEST RIG - For Educational Training

• Speed: 1000rpm
• Output power: 1 kw.

Pelton wheel turbine is only impulse water tubine now in common use named in honour of Sir L.A Pelton (1829-1908) of Califonia, USA. It is a tangential flow impulse turbine.the water strikes the buckets along the tangent of the runner.The energy available at the inlet of the turbine is only kinetic energy.The pressure at the outlet of the Turbine is atmospheric this turbine is used for high heads. The present set-up consist of a runner.The buskets are mounted on the runner. The water is fed to the turbine, though SS nozzle with a SS spear, by means of Centrifugal Pump,tangentially to the runner. Flow of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel. The runner is directly mounted on one end of a central SS shaft & other end is connected to a braek arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS structure.Load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure gauge is fitted at the inlet of the turbine to measure the total supply head to the turbine.

PELTON TURBINE TEST RIG is manufactured by Engineering Models and Equipments to demonstrating PELTON TURBINE , PELTON TURBINE TEST RIG can be availed from us in varied different specifications as per the requirements of the clients.

Pelton Turbine Test Rig is a systemized arrangement of a small Pelton wheel connected to a rope brake. In fact, the entire arrangement in Pelton Turbine Test Rig is done with the help of spring balances. We are into manufacturing, exporting and supplying Pelton Turbine Test Rig at the most genuine prices.

• Type: Laboratory type
• Power: AC
• Voltage: 440 Volt
• Material: SS
• Brand: Efficient Engineers
• Phase: 3 Phase
• Speed: 2800 rpm
• Pump Capacity: 1 HP

• Fuild mechanics and machinary equipment: Francis Turbine Test Rig
• Fuild mechanics and machinary equipment: Kaplan Turbine Test Rig
• Fuild mechanics and machinary equipment: Centrifugal Pump Test Rig
• Fuild mechanics and machinary equipment: Reciprocating Pump Test Rig

Product description:we are among the listed manufacturers, exporters and suppliers of the best quality pelton wheel turbine test rig. The offered range is manufactured using the best grade raw material and sophisticated technology under the supervision of skilled professionals following the set industry parameters. This product is tested on well defined parameters of quality using advanced testing machines. In addition to this, we offer this product to our precious clients at a market leading price.

• Capacity: 5HP
• Rated Speed: 1000 RPM

Pelton Wheel Turbine Test Rig Discharge Capacity: 750 LitersMinute, Supply Head: 50 Meters, Buckets: Gun Metal,Material: Cast Iron.

PELTON WHEEL TURBINE TEST RIG       The ‘J.P.T.I.’unit consist of a small pelton wheel connected to rope brake dynamometer. It is high head at minimum discharge turbine. Water is given from reservoir to the turbine . A centrifugal pump is provided to supply the water to turbine. Orificemeter & pressure gauges provided to measure flow rate, water jet is directed over the bucket by a nozzle Thus, we can determine B.H.P. & I.H.P. & various efficiencies.    

Pelton Wheel Turbine is only impulse water turbine now in common use named in honour of Sir L.A. Pelton (1829- 1908) of California, USA. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner. The energy available at the inlet of the turbine is only kinetic energy. The pressure at the inlet and outlet of the turbine is atmospheric. This turbine is used for high heads. The present set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through SS nozzle with a SS spear, by means of Centrifugal Pump, tangentially to the runner. Row of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS structure. Load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure gauge is fitted at the inlet of the turbine to measure the total supply head to the turbine Experiments To study the operation of a Pelton Wheel Turbine To determine the Output Power of Pelton Wheel Turbine To determine the Turbine Efficiency Utilities Required Water Supply and Drain Electricity 1.5 kW, 440V AC, Three Phase Floor Area 1.5 x 0.75 m

To, visualise the operation and estimate B. H. P. & W. H. P. and various efficiencies of pelton turbine. Pelton wheel connected to a rope brake. Water supplied by centrifugal pump & flow measured by venturimenter & mercury manometer. Water jet is directed over the buckets by a nozzle & a spare operating inside the nozzle controls the water flow.

Pelton turbine test rig of blower casing fitted to a variable speed motor. Three different type of impellers can be fitted over the shaft. Air discharge is measured by venturimeter. The impeller can be rotated at different speed and performance of blower can be estimated at different speed and discharge heads.

• Power: 30 m & 5 H.P.

Pelton WheelFitted with 18 buckets, nozzle for water jet, casing with one side of perspex sheet. The turbine develops 1 HP Approx. output power.The Whole piping of pelton turbine is in G.I. (2”) & valves are ball valves type made by brass material.witch and starter suitable for the above monoblock pump set, mounted on a panel board.

Pelton Wheel Turbine Test Rig (1 KW capacity) a) Test rig consists of a Pelton wheel water Turbine, designed for laboratory experimental purposes and to conduct test in metric units. The specifications of the turbine are as follows :- Design Speed - 1000 RPM. Output Power - 1.0 KW The turbine consists of a cast iron body with a large transparent acrylic window, a nozzle and spear arrangement, a rotor assembly of shaft, runner and a brake drum all mounted on a sturdy base frame. The pelton buckets and nozzle are made of gunmetal and the spear made of brass for corrosion resistance. The input to the turbine is controlled by adjusting the spear position with a hand wheel. A rope brake arrangement with a spring balance is provided for loading the turbine. The transparent perspex sheet side casing is provided for visual observation of flow on the buckets. Water inlet pressure is measured by a pressure gauge. b) Water to the turbine is provided by a centrifugal monoblock pump set of 5 HP capacity. The pump operates on 440Volts, 3 Phase, 50 Hz line. c) Other standard accessories include a DOL starter, switch, flow control gate valve, suitable piping. d) Flow measuring unit consists of a venturimeter with pressure taps connected to two pressure gauges mounted on a panel board. e) The complete test rig is mounted on a storage tank of suitable capacity. The tank is provided with FRP lining for total rust protection.

We design the pelton wheel turbine test rig as per the set scientific principles and used to check the impulse water turbine named in honor of sir l.a. Pelton (1829- 1908) of california, usa. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner. The energy available at the inlet of the turbine is only kinetic energy. The pressure at the inlet and outlet of the turbine is atmospheric. This turbine is used for high heads. the present set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through ss nozzle with a ss spear, by means of centrifugal pump, tangentially to the runner. Row of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel. The runner is directly mounted on one end of a central ss shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid ms structure. Load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure gauge is fitted at the inlet of the turbine to measure the total supply head to the turbine. objectives to study the operation of a pelton wheel turbineto determine the output power of pelton wheel turbineto determine the turbine efficiency utilities required water supply and drainelectricity 15 kw, 440v ac, three phasefloor area 1.5 x 0.75 m

• Usage: Laboratory
• Brand: ETHER
• Material: Stainless Steel

Test rig consists of a Pelton wheel water Turbine, designed for laboratory experimental purposes and to conduct test in metric units. The specifications of the turbine are as follows:- Design Speed - 1000 RPM. Output Power - 1.0 KW The turbine consists of a cast iron body with a large transparent acrylic window, a nozzle and spear arrangement, a rotor assembly of shaft, runner and a brake drum all mounted on a sturdy base frame. The pelton buckets and nozzle are made of gun metal and the spear made of brass for corrosion resistance. The input to the turbine is controlled by adjusting the spear position with a hand wheel. A rope brake arrangement with a spring balance is provided for loading the turbine. The transparent perspex sheet side casing is provided for visual observation of flow on the buckets. Water inlet pressure is measured by a pressure gauge. Water to the turbine is provided by a centrifugal monoblock pump set of 5 HP capacity. The pump operates on 440Volts, 3 Phase, 50 Hz line. Other standard accessories include a DOL starter, switch, flow control gate valve, suitable piping. Flow measuring unit consists of a venturimeter with pressure taps connected to two pressure gauges mounted on a panel board. The complete test rig is mounted on a storage tank of suitable capacity. The tank is provided with FRP lining for total rust protection  

Pelton Turbine Test Rig, Universal Testing Machine, Francis Turbine