Pelton Turbine Dealers

• Finished: Polished
• Material: MS
• Weight: 700 Kg
• Life Span: 30-40 Years
• Features: Reliable, Durable, Excellent quality
• Diameter: 0.3 m to 2.4m

• Features: Good stability, Strong flexible, Quick convenient

Our Pelton Wheel Turbine is only impulse water turbine now in common use named in honor of Sir L.A. Pelton (1829-1908) of California, USA. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner. The energy available at the inlet of the turbine is only kinetic energy. The Pressure at the inlet and outlet is atmospheric. This turbine is used for high heads. The Present Set-up consists of a runner and the buckets are mounted on the runner. The water is fed to the turbine, through SS nozzle with a SS spear, by means of Centrifugal Pump, tangentially to the runner. Row of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel the runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is providing with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS structure. Load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure Gauge is fitted at the Inlet of the turbine to measure the total supply head to the turbine. ExperimentTo study the operation of a Pelton Wheel TurbineTo determine the Output Power of Pelton Wheel TurbineTo determine the Turbine Efficiency

• Brand Name: Edutek
• Model Number: EDPT-13
• Place of Origin: Ambala

We offer demonstration pelton turbine we are able to offer a wide range of pelton wheel test rig. It is manufactured using high grade raw material and innovative technology in compliance with globally accepted norms of quality. The offered range is widely acclaimed in the market, owing to its specific attributes like high efficiency and fine finishing. Our clients can avail the pelton wheel test rig from us within stipulated time period. features of demonstration pelton turbine easy to functionality sturdy construction negligible maintenance descriptions of demonstration pelton turbine the unit is designed to show students how an impulse turbine works and test its performancethe turbine power is adjusted by means of the nozzle cross-section .the experimental unit consists of the pelton wheel, a needle nozzle used as control device (control flow rate), a rope brake dynamometer for loading the turbine and a housing with a transparent front panel .the transparent cover enables you to observe the water flow, the wheel movement during operation.the pressure at the turbine inlet is recorded with a pressure gaugea spring balance to measure brake power and a digital rpm indicator are attached to wheel shaft.thus, the mechanical power output of the turbine can be determined. Flow rate measurement are provided by orifice meter

Our stern examination in the raw materials and other inputs help us presenting quality assortment of products. With complete inspection on all materials, we ensure premium quality of products. Place orders with us, timely deliveries of the same are our prime responsibility! Features Precision engineered Smooth operation User-friendly

• Power: 200 kW to 30000 kW
• Head: 50 m to 1000 m
• Diameter: 0.3 m to 2.4m
• Jets: 1to 6

The Demonstration Pelton Turbine provides a simple low cost introduction to turbine performance.This accessory comprises a miniature Pelton wheel with spear valve arrangement mounted on a support frame which locates on the Hydraulics Bench top channel. Mechanical output from the turbine is absorbed using a simple friction dynamometer. Pressure at the spear valve is indicated on a remote gauge. A non-contacting tachometer (not supplied) may be used to determine the speed of the Pelton wheel.Basic principles of the Pelton turbine may be demonstrated and, with appropriate measurements, power produced and efficiency may be determined.

• Frequency: -50 Hz/60Hz
• Rated speed –: 187rpm to 1800rpm

Generators for Pelton Turbines are designed to take very high radial thrusts. Special design for axial and radial thrust loads FlywheelBrake discLubricating Oil systemSpeed sensing disc-optional s

INTRODUCTION :-Engines & Turbines are widely used as Prime Movers.The Pelton Wheel Turbine using kinetic energy of water is used widely where high head & ample water is available. SPECIFICATION a) Sump Tank :- 1200  600  600Specific Speed :- Approx. 19 rpm.Net Head :- 45m Approx.Discharge :- Approx. 820 LPH.Normal Speed :- 750rpm.Power :- 3.75kw ( 5HP )Runner Diameter :- 250 mm.Number Of Buckets :- 18Brake Drum Diameter :- 450mm.b) Centrifugal Pump set suitable for supply of water of size 3?x 2. ?? size 820 lpm at 48 M coupled to 15 HP induction motor 3 phase 400/400 V.A.C. supply.c) Flowing Measuring Unit : a 65 mm ventury meter of Gunmetel with two pressure gauges on a Panel board to measure the differences of pressure.d) Starterv switch, piping, foot valve, gate valve. ERIMENTATION 1) Demonstrating the operating characteristics i.e. power efficiency and torque of a Pelton Wheel at various speeds.2) Determining the performance characteristics and effect of discharge and velocity of impinging water on Turbine operation.

Technical Description Pelton turbine demonstration unit, designed for operation in conjunction with the Turbine Service Unit. The turbine unit is placed on the Turbine Service Unit and supplied with water by the service unit. The turbine housing is made of Plexiglass so the tangential water jet can be observed unhindered. A braking device is fitted to the impeller shaft of the turbine, the braking device is in the form of a band brake using which the load and moment on the turbine shaft can be measured with an electronic dynamometer. An inductive proximity switch measures the rotational speed of the turbine. The following accessories are required for operation: an Interface Module , Data Acquisition Card with Software and Set of Connecting Cables . Using these accessories it is possible to take measurements, and process and store the measurements on a PC.

• Certification: ISO 9001:2008
• Application: Power Generation
• Color: Black, Grey, Metallic, Silver
• Condition: New
• Automatic Grade: Automatic, Manual, Semi Automatic
• Driven Type: Water
• Blade Material: GFRRP, Glass-Fibre, Metal, Reinforced Resin, Stainless Steel
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Structure: Water Tube
• Height: 0-10mtr, 10-20mtr, 20-30mtr, 30-40mt
• Production Power: 1-5Mw, 10-15Mw, 15-20Mw, 20-25Mw

• Product Code: FM-HBA-17
• Speed range: 0 to 2000 r.p.m
• Brake power: 10 Watts
• Pressure gauge range: 0 to 25m H2O
• Force balance range: 0 to 20N + 0.2N
• Number of Pelton buckets: 16
• Diameter of Pelton wheel: 123mm

The Demonstration Pelton Turbine provides a simple low cost introduction to turbine performance.This accessory comprises a miniature Pelton wheel with spear valve arrangement mounted on a support frame which locates on the Hydraulics Bench top channel. Mechanical output from the turbine is absorbed using a simple friction dynamometer. Pressure at the spear valve is indicated on a remote gauge. A non-contacting tachometer (not supplied) may be used to determine the speed of the Pelton wheel.Basic principles of the Pelton turbine may be demonstrated and, with appropriate measurements, power produced and efficiency may be determined.   RANGE OF EXPERIMENTS   Determining the operating characteristics, i.e. power, efficiency and torque, of a Pelton turbine at various speeds   UTILITIES REQUIRED   Hydraulic Bench  

• Speed: 200-1000 rpm
• Pressure Range: 1 bar
• Generator/Alternator Type: Petrol Generator
• Head Range: 30-50 m
• Frequency: 50/60 Hz
• Phase: 3 Phase

• Country of Origin: India
• Type: Pelton Turbine
• Certification: CE Certified
• Brand Name: UMI

- Pelton wheel Turbine - For Educational Training

• Model: HV-EXP323

An all metallic working model, comprising of a single jethorizontal shaft turbine. A 20 cm diameter disc provided withdouble hemispherical cups mounted in a housing with a transpatent window on one side. The model ordinarily works by use with tap water connectedto over head laboratory tank. The inlet jet is provided with Iiscrew type regulator to control smooth inflow of water

MS powder coated Sump Tank Specific Speed Approx. 19 RPM, Net Head 45m Approx. Discharge Approx. 820 LPH approx, Normal Speed 750 RPM. Power 1kw ( 5HP motor), Runner Diameter 250 mm, Number Of Buckets 16 Brake Drum Diameter 200 mm. Centrifugal Pump set suitable for supply of water of size coupled to 5 HP induction motor 3 phase 400 V. A. C. supply. Starter switch, piping, foot valve, gate valve.

• Material: MS
• Country of Origin: Made in India
• Power: 100kW
• Usage/Application: Electricity Production
• Pressure Range: 1000 LPS
• Generator/Alternator Type: Hydro
• Voltage: 12 V DC

• Head (m): 50 - 400m
• Turbine Output (kW): 50kW - 5MW

Pelton turbine is an impulse turbine for high heads. Our Pelton Turbines guarantee highest operating efficiency and reliability. » We manufacture Horizontal Shaft Pelton turbine with 1-3 jets arrangement. » For vertical shaft arrangement 4-6 jets are required. » Runner in Stainless steel is integrally cast. » Micro range Pelton, buckets are bolted to hub. » For Horizontal Shaft arrangement bearings are roller type grease lubricated. » Regulation - ON/OFF Type and Regulating Type Applications » Pelton Turbines are used for water energy production in areas with high hydraulic head and low water flow. » Pelton Turbine is the most efficient in case of inlet water with high pressure.    

• Type: Pelton Turbine
• Certification: CE Certified, ISO 9001:2008
• Application: Power Generation
• Color: Black, Grey, Metallic, Silver
• Automatic Grade: Automatic, Manual, Semi Automatic
• Blade Material: GFRRP, Glass-Fibre, Metal, Reinforced Resin, Stainless Steel
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Height: 0-10mtr, 10-20mtr, 20-30mtr, 30-40mt
• Speed: 0-200rpm, 200-400rpm, 400-600rpm
• Production Power: 1-5Mw, 10-15Mw, 15-20Mw, 20-25Mw, 25-30Mw, 5-10Mw

Pelton Wheel Turbine, Kaplan Turbine

Pelton Turbine, Francis Turbine, Kaplan Turbine, Axial Flow Turbines

• Type: Pelton Turbine
• Application: Power Generation
• Color: As Cast
• Condition: New
• Blade Material: Stainless Steel
• Pressure: High Pressure
• Country of Origin: India
• Brand Name: Superior
• Material: SS304

Buckets dimensions are designed in such a way that its breadth should be 3 to 4 times of diameter of jet, length should be 2 to 3 times of diameter of jet and thickness should be 0.8 to 1.2 times the diameter of jet. Superior Steel Castings has developed all type of runners Ie: Francis, Pelton and Kaplan. All runner are in stainless steel grades and having uniform shape and weight of buckets.   #Pelton #Kaplan #Francis #Peltonrunner #Kaplanrunner #Francisrunner #Hydropower #Hydropowerplant #minihydropowerplant #Greenenergy #SS304 #Investmentcasting #electricity #GreenElectricity #power #energy #water

Pelton Wheel Turbine, sev making machine, murukku making machine

Pelton Wheel Turbine, Hanna - Hand Held Calorimeters

Pelton Turbine, Wind Turbine Blades, Spiral casing, wind turbine parts

Pelton Turbine, Accumulator Charging Units, C-bar Q Screen Basket

Pelton Turbines produced by Flowmore are available with horizontal or vertical shaft and with multi jet mechanism which being controlled separately. These Turbines are particularly suitable for exploiting plant conditions where there is low flow utilization as compared with the high head.

Pelton Wheel Turbine, Subsonic Wind Tunnel Test Section