Pencil Hardness Tester Dealers

• Usage: Hardness Testing
• Display Type: Analog
• Load Capacity: 1000g, 750g, 500g
• Specialities: Easy To Use, Proper Working
• Country of Origin: India

Product Description 1. Pencil hardness testers are used to measure the hardness of coatings, paints, and other materials. They are commonly used in the paint and coatings industry to ensure that products meet certain hardness requirements.2. Pencil hardness testers use a set of pencils with different lead grades, ranging from very soft (6B) to very hard (9H). The pencils are mounted in a holder and are used to make a series of scratches on the material being tested.3. The hardness of the material is determined by the pencil that makes the scratch that is just visible on the surface of the material. The higher the number of the pencil, the harder the material4. Pencil hardness testers are easy to use and provide quick results. They are also relatively inexpensive compared to other types of hardness testers.5. To use a pencil hardness tester, the operator selects a pencil with a particular lead grade and makes a series of scratches on the material being tested. The scratches are then inspected to determine the pencil that made the scratch that is just visible on the surface of the material. The hardness of the material is then determined based on the pencil grade.

• Weight: 2.1 Kg
• Hardness Scale: 6B-9H
• Testing angle: 45 Degree
• Test load: 500-1000g

• Usage: Hardness Testing
• Color: Grey
• Frequency: 50 Hz
• Operating Type: Semi Automatic
• Specialities: Easy To Use, Electrical Porcelain, Proper Working
• Temperature Capacity: 45 Degree
• Fixed Pressure: 7.5N/750 gm

The samsonic pencil hardness tester is used for verifying the hardness values of graphite pencils to evaluate coating hardness. The Test Block is so designed to ensure that the cylindrical pencil lead is maintained at a constant angle of 45° and exerts a force of 7.5N approx. The pencil lead, prepared beforehand using the special sharpener and abrasive paper, is provided with the instrument and pushed over the smooth, flat coated surface.   The lowest hardness value of the pencil which marks the coating determines the coating’s hardness rating. The instrument is supplied complete with set of hardness pencils (14/17/19 pencils), positioning block(optional), x1 pencil sharpener, abrasive paper set, carry case and operating instructions can be used in accordance with ASTM D 3363, IS 101 (part 5), BS 3900-E19, ISO 15184 etc.   6B to 4H, 12 Pencils, STAEDTLER German The pencil hardness test, also referred to as the Wolff-Wilborn test, uses the varying hardness values of graphite pencils to evaluate a coating’s hardness.   Model: PHT-S12 supplied complete with Indian make Scratching tool of fixed pressure of 7.5N/750gms and 45 fixed angle, STAEDTLER German make Pencils in set of 12 pencils 6B to 4H in original packing, set of 12 Pencils includes – 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H and 4H, 1 no. STAEDTLER German make sharpener, set of Abrasive Paper and operation manual.   8B to 6H, 19 Pencils, STAEDTLER German Model No:-PHT-S19 The pencil hardness test, also referred to as the Wolff-Wilborn test, uses the varying hardness values of graphite pencils to evaluate a coating's hardness.   Model: PHT-S19 supplied complete with Indian make Scratching tool of fixed pressure of 7.5N/750gms and 45 fixed angle, STAEDTLER German make Pencils in set of 19 pencils 8B to 6H in original packing, set of 19 Pencils includes – 8B, 7B, 6B, 6B, 5B, 4B, 4B, 3B, 2B, 2B, B, HB, F, H, 2H, 3H, 4H, 5H, and 6H, 1 no. STAEDTLER German make sharpener, set of abrasive paper and operation manual.

Pencil Hardness Tester Pencil Tester complies with the requirements of ASTM D3363 and ISO15184 standard, through leaving a  superficial trace on the dry coating film with a certain pencil hardness, the surface will be variably damaged by the hardest pencil to evaluate pass/fail or hardness. Recommend to apply on the smooth film surface. Use variety of different hardness pencils, the angle between pencil and the coated surface is 45 deg, scratch on the coated surface under a certain of force, the scratch resistance hardness of the coating is the pencil hardness which just scratched the coating.   Pencil Hardness Tester Pencil Tester complies with the requirements of ASTM D3363 and ISO15184 standard, through leaving a  superficial trace on the dry coating film with a certain pencil hardness, the surface will be variably damaged by the hardest pencil to evaluate pass/fail or hardness. Recommend to apply on the smooth film surface. Use variety of different hardness pencils, the angle between pencil and the coated surface is 45 deg, scratch on the coated surface under a certain of force, the scratch resistance hardness of the coating is the pencil hardness which just scratched the coating.

• Material: Stainless Steel
• Length: 150-200mm
• Packaging Type: Carton Box
• Structure: Horizontal
• Warranty: 1 Year
• Operating Type: Manual

A traditional method to test the resistance of coatings to scratch. Pencils of progressive hardness, hold by a specific carriage are applied onto the test surface under a force of 750g, at 45 deg. angle. The surface will be variably damaged, in function of the pencil hardness, thus pass / fail or hardness to failure evaluations are possible. Built in spirit level. CODE:10005-01 MITSUBISHI' Hardness pencils set of 14 pencils 6B to 5H. CODE:10005-02 Set of 20 Pencils 9B TO 9H. CODE:10005-03 'STAEDTLER' Hardness pencils set of 12 pencils 6B to 4H. CODE:10005-04 Set of 19 pencils 8B to 9H. Set of 14Mitsubishi-UNI Pencils contain the following pencils 6B , 5B , 4B , 3B , 2B , B , HBx2nos. , F , H , 2H , 3H , 4H , 5H Set of 20 Mitsubishi-UNI Pencils contain the following pencils 9B , 8B , 7B , 6B , 5B , 4B , 3B , 2B , B , HB , F , H , 2H , 3H , 4H , 5H , 6H , 7H, 8H , 9H. A greater percentage of clay results in a harder pencil lead, Pencils graded H, F, HB and B are of average hardness. Pencils ranging from 2B to 10B are softer and while 2H to 10H pencils are harder than average. The harder the pencil the lighter the mark, and the softer B-grade leads tend to create darker colors and smear easily.  

Product Description   The Pencil Hardness tester is the most common but also the most inconsistent technique to measure the hardness of a coating. This test conduct scratch hardness tests to determine the resistance of coating material in order to prevent the scratches on the surface. Furthermore, pencils of various degrees of hardnesses are made to move all over the surface under a fixed pressure and angle. The pencils that damage the surface are taken as the final measurement of scratch hardness. We will also supply all range of Pencil for Hardness Test  like : 6B, 5B, 4B, 3B, 2B, B, HB, H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 8H, 9H,F.   Scratch hardness tests is to determine the resistance of coating materials to scratch effects on the surface.   In the test, pencils of various degrees of hardness are moved over the surface under a fixed pressure and angle to the surface. The degree of hardness of the pencil which damages the surface is taken as a measurement of scratch hardness e.g. ‘3H’ hardness.   Pencil Guide with Imported 12 / 19 pencils Complies with ASTMD 3363

• Display Type: Analog
• Material: EN 31
• Country of Origin: Made in India
• I Deal In: New Only
• Measurement Angle: 45 Degree Between Pencil and Measured Surface
• Load Weight: 1000 g 750 g 500 g
• Three Touch Points: Two Wheels, A Pencil Core
• Scratch Speed: About 1 mm/s
• Item Code: PHT-801

According to Wolf Wilborn standard, this tester is designed to measure the coating hardness scrape-resistance, applied to experiment analysis or control production quality, suitable products including oil painting, furniture, car, cell phone, notebook, language translator, digital camera, etc. It is fast and easy to test single or double layer baking varnish.  

Pencil Hardness Tester is used to determine the scratch resistance & hardness of the painted surface. It is used to determine scratch (mar) andor gouge hardness of coatings. Designed to meet National & International Standards, the tester is an easy to use ,compact model with excellent repeatability.

• Automation Grade: Automatic
• Weight: 1-2 kg
• Scratch Speed: 1 Mm/sec
• Pressure of Pencil Tip: 1000/750/500g

The test is very simple to do, will give uniform results, and is dependable because the pencils are graded. The grade of the pencil is determined by the amount of baked graphite and clay in its composition.

The pencil hardness tester is the most common but also the most inconsistent technique to measure the hardness of a coating. This test conduct scratch hardness tests to determine the resistance of coating material in order to prevent the scratches on the surface.

We are manufacturing The Wolf-Wilburn Pencil Hardness test offers a higher level of precision for a pencil scratch tester.

The purpose of scratch hard­ness tests is to determine the resistance of coating materials or lacquers to scratch effects on the surface. Generally, scratch hardness is measured by moving a sharp object under a known pressure over the test surface. Here is informative video on how to properly set up and use a pencil hardness tester, or scratch tester.

• Country of Origin: Made in India
• Initial Loads: 750 gram
• Brand: HPFS
• Usage/Application: To test Hardness of paint coatings

Avail from us high performing Pencil Hardness Tester at market leading rates. The testers offered by us are manufactured in accordance with the ASTM D 3363, ISO 15184 standards and norms. These testers can be availed in obtained in three different weights (500g, 750g and 1000g) by selecting different loading weight. Main Technical Parameters: Three points are touched on the tested surface (roller, pencil core) The angle between pencil and the tested surface is 45* Pressure of pencil lead is 500g, 750g, 1000g

Pencil Hardness Tester., Orbital Incubator Shaker, Hand Held Refractometer

Pencil Scratch Hardness Tester, Surface Temperature Strip

Elcometer Pencil Hardness Tester, Digital Dial Indicator, Lux Meter