Petroleum Testing Equipment Dealers

• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 220V, 380V
• Application: Petroleum Testing
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Semi Automatic

Digital Current Controlled Glow wire Test Equipment with Digital Temperature Indicator, Timer for Test Time and Time totalizer for Ignition time.As per IS & IEC Standards.

• Abel Oil Cup Thermometer: (-35 / 70 C x 0.5°C) IP 74 C
• Abel Water Bath Thermometer: (-30 / 80 C x 0.5°C) IP 75 C

Abel Flash Point Apparatus is suitable for determining the close cup flash point of Petroleum and mixtures according to IP 33 & IP 170 and also IS 1448 (Part I) 1985 (P:20). It is suitable for oils whose flashes below 70°C. It is supplied with oil cup, cover fitted with stirrer, thermometer socket S.S. Water Bath, Stand. An electric heater is fitted at bottom for operation on 220 Volts AC Circuits.

• Voltage: 220V
• Power: 1.5W to 3W
• Material Grade: SS 304

SAMTEKLAB is the Petroleum Testing Equipment’s manufacturers ,Exporter and Suppliers for all Our India.P[petroleum testing equipment’s is the most Commonly used for Petroleum Industry. Its’s helps to testing the petroleum by Product or crude Oil,gas Petroleum testing in also used for various. other Petroleum testing equipment’s exist to all the aspects of petroleum testing equipment’s. Basically this machines are demanded Nationality & International Industry. Abel Flash Point,Red-Wood Vesco meter,tar Visco meter,Pen sky Marten Flash Point App,Ring&Bell app Thermometers for all instruments.

• Temperature: Ambient to 100°C, ± 0.5°C.
• Speed: upto 1500 rpm, ± 15 rpm.
• Power Supply: 230 V, 1 Phase, 50 Hz.

The ability of a lubricating oil to separate from water and resist emulsification is an important performance characteristic for applications involving water contamination and turbulence. Water separability is determined by stirring equal volume of water and sample together at a controlled temperature to form an emulsion and observing the time required for separation of the emulsion to occur. This method is suitable for petroleum oils and synthetic fluids. Rectangular model having double walled construction with toughened glass observation window (230W x 200H mm). Illumination from rear side. 4 place Herschel Emulsifier. Added advantage of the stirrer being easily moved to each test position instead of moving the samples. Digital temperature, speed and timer Timer stops the stirrer after 5 minutes automatically and audible alarm.

• Color: BLUE AND GRAY

AUTOMATIC DISTILLATION ANALYSER. IN THAT VB BASED SOFTWARE IS THERE, WE CAN CREATE VARIOUS METHODS IN THAT LIKE PETROL, KEROSENE, DIESEL, ATF, NAFTA ETC.IN THAT WE CAN OBSERVE CONDENSER TEMPERATURE, HEATING RATE, RECEIVER TEMPERATURE, DISTILLATION RATE, VAPOUR TEMPERATURE, RECEIVER VOLUME, BAROMATIC PRESSURE ETC. ALSO WE CAN TAKE PRINTOUT OF RESULT . AUTOMATIC COOLING OF RECEIVER IS THERE. ALSO FIRE PROTECTION IS PROVIDED AND MANY MORE FEATURES.

• Working temperature: 50 to 200° C
• Temperature Control: PID control
• Temperature Acuracy: ±0.2 °C
• Bath Stirring Motor: 40W
• Capacity: 26 ltr
• Heating Medium: Silicon Oil
• Rotor: 6 Units
• Stirring Motor: speed control motor , 15Wx6
• Stirring System: direct moor driven
• Rotating Speed/accuracy: Primary 1300 rpm ± 15 rpm

We are offering petroleum testing equipment that is designed to perfection by keeping in focus the varied requirements of the clients. The petroleum testing equipment hat we deal in is made using high grade material raw material that enhances the life time of the petroleum testing equipment. suitable for : lubricantstransformer oilshydraulic oilsgear oilscutting oilsgreases variety : viscosity bathsviscometersquenchometerflash point testersoxidation stabilityfour ball testerageing ovenspenetrometers.

• Voltage: 220-240V
• Country of Origin: Made in India
• Phase: Single phase
• Power Source: Electric
• Model Name/Number: EIE-PTGT-126
• Brand: EIE
• Frequency: 50-60 Hz

PENETROMETER WITH BATH FOR BITUMEN & TAR(Analog Version) Penetrometer with bath for Bitumen &Tar Test : As per IS: 1203/1978Use: Used for the determination of penetration of asphaltic bitumen and fluxed asphalt and blown type bitumen, Petroleum wax & jelly.Description: Bath Unit consists of container of 20cm (H) x20cm (W) x35cm (L) Argon welded, needle, SS Cup 55mmdiax35mm (H) 8No. Transfer dish4No., Water bath Inner of SS304 and outer powder coated finish with motorized stirrer cum pump and a flange type hot+cold zone immersion SS304 heater of 1.5 Kw rating to maintain desired temp.Temp. Range: 0°C-95°C, having cooling & heating arrangement controlled by a Digital Temperature controller cum indicator with PT-100 Sensor, Continuous duty Kirloskar compressor for cooling, electrically operated DC 230V plunger, penetration indicator between 225&350, Needle with 50 gms. and 100 gms. weights and timing device. Digital penetrometer for direct readout of penetration having Encoder & Decoder arrangement with digital timer 9.9 sec Max. The whole unit is mounted on castor wheels for easy movability.Microprocessor based unit provides automatically timed operator programmable penetration measurements • Conforms to all ASTM, IP, ISO 9001 and related specifications Unit tests the consistency of lubricating greases, petroleum waxes, bitumens, pastes, creams and other solid to semisolid products, including a variety of food products. Microprocessor control provides a full range of measurement and reporting options The penetrometer defaults to the standard ASTM interval of 5 seconds, or the operator may program a different interval in the range between 0.1 and 999.9 seconds. All selected parameters are retained in memory and automatically repeated in subsequent tests until changed by the operator. Penetration measurements in the full range of 0-400 in 1/10 mm scale are reported in either 1/10 mm or 1/100 mm increments at the operator’s option. If a test result falls outside of the programmed range, an audible signal and visual error message alert the user of a failed sample. Results can be communicated to a printer or computer via a built in interface. Illumination with magnifying glass is also provided. Fine adjustment of the tip of the needle is also provided. Leveling indicator is also given. Built in DC operated Plunger is also incorporated with UNIT.Power:230V50HzBASIC MANUAL (DIAL TYPE) PENETROMETER(With all standard accessories)(Standard accessories includes Needle, Cone with Needle,50/100gms wts,Plates, Cylindrical Container, Sample Container)SS Bath (with Heating/cooling) digital temp. controller PT-100 Sensor for bath, transfer dish(8nos),Pump cum Stirrer-( Only Dig PID Microprocessor Controller with AUTOTuned type for Bath Temp Control, Range +2*C to 98*C )BASIC Manual PENETROMETER WITH BATH (heating) digital temp. controllerPT-100 Sensor for bath, transfer dish(8nos),Pump cum Stirrer and Spring loaded needle & std accessories)( Only Dig PID Microprocessor Controller with AUTO Tuned type for Bath Temp Control )DIGITAL PENETROMETER WITHOUT BATH but with Electrically Operated DC Plunger& All std accessories ,Illumination, Magnifying glass, Leveling tube DIGITAL PENETROMETER (with Electrically Operated DC Plunger& All std accessories ,Illumination, Magnifying glass, Leveling Tube) WITH BATH (heating/cooling), digital temp. controller PT-100 Sensor for bath, transfer dish(8nos),Pump cum Stirrer.Manual Penetrometer: As per IS: 1448[P 93]:1979 / IS: 1203:1978 / ASTM D 1321-76 / ASTM D 217. The Universal Penetrometer is employed for testing a wide variety of materials as measured by penetration of weighted needles or cones. Main applications are for bituminous materials, but waxes, greases, foods, and pharmaceuticals are among other products tested. Penetration is read from a 5" (127mm) diameter indicator dial of 0-400 divisions, each representing 0.1mm of penetration. Global offers heavy-duty units for manual and automatic use and a lighter, portable model for field work or for users with limited work load or limited budget. All meet ASTM and IS standards when fitted with proper needle or cone.The unit is ruggedly constructed for accurate, sensitive measurements. The aluminum base has a machined, grooved table with leveling screws for fine adjustments of tips of needles, cones and a spirit level. A robust stainless steel rod act as a support guides for a cast aluminum head with coarse adjustments & a movable table with rotating knob for fine adjustments to level the meniscus of specimen and a calibrated friction-free plunger mechanism. Indicator dial has instant zero reset. Any needle or cone with standard 1/8" (3mm) diameter stem may be mounted to the 47.5g plunger assembly. A standard 2.5g needle and two additional loading weights (50g, 100g) are included. Needles or cones for other tests can be provided separately as needed. Overall dimensions are 10.5x13x22" (267x330x559), (W x D x H) approx.The Automatic model is the same as the manual unit, but has a button release mechanism with digital timer & DIGITAL read out for penetration to automatically stop the plunger when the preset time from 0.1 to 9.9 sec. expires with audible buzzer sound.The penetration needle for bituminous materials is smooth, hardened, tempered stainless steel with brass ferrule and weighs 2.5g to give 50g total when mounted. Stainless steel wax penetration needle is also 2.5g but has truncated coneshaped tip with approx. 4mm maximum diameter tapered to 0.15mm diameter end. several types of 102.5g grease cones as having polished 90° cone with 30° removable hardened steel tip are available.Standard accessories includes: 1no spring loaded Plunger, 1no each wts of 50 & 100gm, 1no of Needle, 1no Sample Container (Manual Unit including all standard accessories) & CalibretionExtra for Electrically operated Plunger for release of needle/cone.Extra for Digital Timer.POWER: 230V,50 Hz(If opted for Electrical Plunger & Dig.Timer with Buzzer Alarm)CONES, NEEDLES AND ACCESSORIES: Use with Digital/Manual Pentrometer to determine the consistency of petroleum products, wide range of penetration types are available ( also for non-petroleum samples ,see below). (For Grease) (For Bitumen) (For Grease) (For Wax)Optional: (If required additional)1. Weights of 50/100 gms, duly chrome plated and slotted for loading. 2. Hardened needle as per IS standard, GC 2131 per needle. For GC 2121 (HOLLOW CONE of BRASS duly Nichal/Chrome Plated weighing 2.5gms) per needle 3. Brass solid cone as per IS standard. (Used only for Wax/Grease penetration GC 2141/2142)) 4. SS container As per IS STD (35 mm Ht. x 56 mm Dia.) for bituminous sample. 5. SS /Brass Chrome Plated Cylindrical Container As per IS STD with inside thread for Wax 6. SS/Brass Base Plate Chrome plated As per IS STD for Wax 6. Provision for Illumination with magnifying glass 7.. SS Standard Block for Calibration Purpose of Penetrometer (5mm,10mm,15mm,20mm) 8... Dimensional Calibration Charges extra for accessories For Cone, For rest

• Certification: CE Certified
• Color: Brown, Pink
• Voltage: 220V, 230V
• Driven Type: Electric
• Warranty: 1year, 2years, 5 Years
• Automation Grade: Automatic, Fully Automatic, Semi Automatic
• Condition: New,Used
• Use: Petroleum Testing

MICROTEKNIK is the Petroleum testing equipment's Manufacturer & Exporter or suppliers foe all India. Petroleum testing equipment's is the most commonly used in Petroleum Industry. it's helps for testing Petroleum by products or crude Oil,gas Petroleum testing in also used for various. other Petroleum testing equipment's exist to all the aspects of petroleum testing equipment's. Basically this machines are demanded Nationality & International Industry. MICROTEKNIK products are: Abels Flash Point,Red-Wood Vescometer,tar Viscometer,Pen sky Marten Flash Point App,Ring&Bell app Thermometers for all instruments.

• Country of Origin: India
• Certification: ISO 9001:2008
• Application: Petroleum Testing
• Weight: 2000-3000kg
• Power: 9-12kw

The complete outfit comprises hemmertone finish, copperStainless steel bath with drain plug, electrical heating arrangement, Suitable to operate at 220 Volts 50 Hz AC mains Or gas heating arrangement with silver plated oil cup with precision stainless steel jet, ball value, cover, thermometer clip, stirrer and suitable stand with levelling screws.

• Type: Petroleum Testing Equipment
• Weight: 100-1000kg, 1000-2000kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Application: Petroleum Testing
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

We at Hover Labs Promises to supply "Cloud and Pour Point" for Oil and Petroleum testing without compromising with Quality. Low temperature properties of oils are assessed by cloud point tests. The pour point is the least temperature at which the oil will simply neglect to flow. The mechanical assembly comprises of a primary cooling shower made of stainless steel sheet and stand unit with channel attachment and spread with procurement for fitting thermometer and a filling gap for including solidifying blend. A glass container for containing oils, coat, circle and gasket as indicated are additionally given.

For our buyers in ambala(india) and other markets, we provide a vast array of the product at competitive prices. Being a trustworthy supplier in the market, we cater to the demands of the customers by presenting excellent petroleum testing equipment.

The apparatus consists of a penetrometer with adjustable head combined with a gear that permits a fine adjustment of the cone position right upon the bitumen sample: the results are showed on a digital display placed, together with an electronic timer in an independent control box.Optionally, refrigerated baths of various sizes are available (please require related technical bulletin): by connecting the bath to the transfer dish it is possible to penetrate samples while immersed in water at 25°C or other test temperatures.