Pilot Check Valves Dealers

• End Connection: Screwed
• Power Source: Electric
• Flow Rate: 150 l/min
• Power Source: Hydraulic
• Weight: 1.8 kg
• Max Pressure: 350 bar

Steel Body Threaded Of sub Plate or Modular Pressure to 350 bars Prevents flow in reverse direction

Application: For use with open or tandem center valves. Permits free flow of fluid in one direction. Operation: Flow is blocked in opposite direction until pilot oil pressure is applied. This prevents the loss of pressure if the valve is inadvertently shifted or the pump line is broken. Minimum cracking pressure is 60 psi. Required pilot pressure is approximately 16% of checked system pressure.    

• Features: For subplate mounting, Subplates to data sheet RE 45062 (separate order), For threaded connections, 4 opening pressures

・Pilot check valve and speed controller are combined. ・Realizes momentary intermediate stoppage of a cylinder and is able 　to adjust its speed control.

• Material: Metal
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pressure: High Pressure
• Size: Available in Different Size
• Pack Type: Box

Hydraulically Pilot-operated Check Valves Can, Open Requirement, Open Via An Additional Control Oil Connection In Shut-off Direction. Therefore, They Consist Of A Valve Housing, A Control Piston For Unlocking, A Valve Seat, A Ball And A Closing Spring.

• Material: Mild Steel
• Country of Origin: India
• Series: CPDG-06
• Max Flow (lpm): 1 to 125
• Max Pressure ( Bar ): 250

Pilot Controlled Check Valve  Pilot Controlled Check Valves These check valves allow flow in one direction and prevent flow in the reverse direction, until operated by pilot pressure to allow free reverse flow. The specified cracking pressure is required to open the valve to allow free flow direction

In order to provide the extensive demands we are offering our customers a wide range of Pilot Operated Check Valves. These valves are manufactured using high-grade raw material and advanced technology to ensure their adherence with international standards and norms and to ensure high durability and performance. Features: Completely Anti-corrosive Fine-finish & Sturdiness Dimensional Stability Specifications: Type: Modular Type Flow Capacity : 35 LPM/80 LPM Pressure Range: 0 to 315 Bar

• Brand Name: Veljan
• Material: SS
• Max Flow: 02 up 35 L/min & 03 up to 70 L/min
• Max. Pressure: 210 bar
• Viscosity Range: 10 To 800 mm2/s
• Shape: Rectangular

• Brand Name: Festo
• Finishing Type: Polished
• Packaging Type: Box
• Max Flow: 130 to 1600 l/min
• Port: G1/8, G1/4, G3/8, G1/2

• Mounting Type: Thread type & Subplate type

Suppliers & Manufacturer of Pilot Operated Check Valves. Our product range also comprise of Hydraulic Gear Pump, Hydraulic Accessories & Controls. We offer high quality Pilot Operated Check Valves

• Brand Name: Hydmark
• Material: Stainless Steel
• Pressure: 460 bar
• Media: Gas

• Brand Name: PARKER
• Type: Hydraulic Check Valves
• MODEL: MCVP-3-D-N-10
• Type: PILOT CHECK HYDRAULIC VALVE
• PMAX: 250 BAR

PARKER 1604 PILOT CHECK HYDRAULIC VALVE MCVP-3-D-N-10 250 BAR MODEL: MCVP-3-D-N-10 TYPE: PILOT CHECK HYDRAULIC VALVE PMAX: 250 BAR CONDITION: USED & WORKING QTY: 1 PC AVAILABLE  REF: AL

• End Connection: Butt Weld
• Material: MILD
• Pressure: 315 BAR
• Size: 10
• Brand: PRISM
• Valve Size: 10 ,20 AND 30
• Media: Fuel
• Design Type: Seat type valve,with decompression poppet
• Model Name/Number: CLV 10 P 0 1
• Pilot Ratio: IN DATA SHEET
• Features: Sturdy design, High strength, Anti-corrosive

• Material Steel hub and high graded plastic material sleeve

• Rated Flow L/Min.: 125

These check valves allow flow in one direction and prevent flow in the reverse direction, until operated by pilot pressure to allow free reverse flow. The specified cracking pressure is required to open the valve to allow free flow direction.

• Max Flow: 35 lpm
• Max Pressure: 350 bar

Pilot check valves allow flow to pass in one direction, with a low pressure drop, then prevent reverse flow until pilot pressure is applied. There are many applications for this valve type, the most common being to lock and hold a cylinder, or another hydraulic actuator, in position. The CK35 is a small cartridge valve and is ideally suited for fitting directly into a cylinder, giving economy of installation, direct control of cylinder movement and ease of servicing.

• Material: Carbon Steel
• End Connection: Screwed
• Valve Size: 1/4", 3/8" & 1/2" tsp
• Media: Hydraulic oil
• Pressure: 350 Bar
• Pack Type: Box