Pilot Operated Valves Dealers

Application – Single-acting cylinders. Actuation - Pilot oil. Functions – When pump is started, pilot oil automatically closes valve and directs oil to cylinder; when pump is stopped, valve automatically opens and oil returns to reservoir. Used on these pumps – Furnished with pilot lines and adapters for PA55, PA90, PE30, PE55, PE90, and PE120 series. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached to this valve. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9504, 9584, 9610 and 9610A, order four 12001 cap screws. For valve 9582, order two 12001 and two 10856 cap screws.                                      

• Type: 3X2
• Model No: ATA1D
• Design: Spool with Cartridge Type
• Port Size: In/Out - 1/4 BSP & Exhaust – 1/8 Inches BSP
• Media: Compressed Air, Filtered & Lubricated
• Working Pressure Range: 2 - 10 bar
• Ambient/Medium Temperature: 5°- 60° C
• Flow: 1200 lpm
• Materials of Construction: Aluminium, Nitrile, Brass, Polymer
• Pilot Pressure Range: 2.5 - 8 bar
• Features: Cartridge Type design for Long life. Compact design. Lubrication not essential. The head can rotate 180. 20 Lacs Cycle tested. Single and Manifold Mounting

• Material: Metal
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Pressure: High Pressure
• Size: Available in Different Size
• Pack Type: Box

Hydraulically Pilot-operated Check Valves Can, Open Requirement, Open Via An Additional Control Oil Connection In Shut-off Direction. Therefore, They Consist Of A Valve Housing, A Control Piston For Unlocking, A Valve Seat, A Ball And A Closing Spring.

• Features: For subplate mounting, Subplates to data sheet RE 45062 (separate order), For threaded connections, 4 opening pressures

• Type: Control Valves
• Brand Name: Amot
• Material: Mix Metal
• Number Of Way: 4way
• Automatic Grade: Manual
• Condition: Used
• Driving Mode: Pneumatic

Amot 4057D025H1 pilot control valve 1/4in Npt type cp "used in good condition"

• Size: 6
• Component series: 1X
• Max. Operating Pressure: 315 Bar
• Flow, Max.: 40 L/min
• Brand Name: Bosch Rexroth

• Country of Origin: India
• Size: 1.1/2inch, 1.1/4inch, 1/2inch
• Certification: ISO 9001:2008 Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Brand Name: Janatics

• Material: Mild Steel
• Automatic Grade: Semi Automatic
• Feature: Durable, Investment Casting
• Type: Pilot Operated Directional Valve
• Country of Origin: India
• High Flow Rate: Upto 500 lpm (79.3 USgpm)
• Maximum Operating pressure: Upto 315 bar (4500 PSI)
• Average Durability: 50 Million Spool Shifts

Pilot Operated Directional Valve  These valves perform a change over of spool by hydraulic pilot and shift the direction of oil flow.

We ensure that the delivery schedule should be properly maintained in order to meet the exact requirements of the customers. As we ensure complete safety of the products at our end, we follow stringent and organized warehousing system in our state-of-the-art warehouse. Moreover, the system is supervised by experts. Features : Available in two versions Low cracking and closing pressure Bubble tight - elastomer seat Plastic portion can be turned by 360o Teflon pre-coated male taper threads  

• Country of Origin: India
• Brand Name: DEVAAM
• Material: Stainless Steel
• Certification: ISO 9001:2008 Certified
• Usage: Gas Fitting
• Color: Blue
• Media: Gas
• Packaging Type: Wooden Box, Carton
• End Connection: Flange End
• Type: Safety Relief Valves
• Temperature Pressure: Low Temperature Pressure
• Packaging Size: 1 pieces
• Condition: New
• Finishing: Coated
• Corrosion Resistance: Yes
• Warranty: 1 Year
• Automatic Grade: Manual
• Specialities: Non Breakable, Investment Casting, Heat Resistance, Durable, Casting Approved, Blow-Out-Proof

• End Connection: Screwed
• Power Source: Electric
• Flow Rate: 150 l/min
• Power Source: Hydraulic
• Weight: 1.8 kg
• Max Pressure: 350 bar

• Brand Name: Aira
• Pressure: 0.7 to 12KG/Cm2
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Size: 1/2inch, 1inch, 2inch, 3/4inch, 11/2"
• Type: Pilot Operated Solenoid Valve
• Media: Air, Water, Oil and Gas
• Temperature Of Media: Upto 85C

Brand : AiraModel : ISDBody MOC : CF8Diaphragm : NitrileMedia : Air, Water, Oil and GasPressure : 0.7 to 12KG/Cm2Temeprature : Upto 85C SIZE

• Brand Name: Veljan
• Material: SS
• Max Flow: 02 up 35 L/min & 03 up to 70 L/min
• Max. Pressure: 210 bar
• Viscosity Range: 10 To 800 mm2/s
• Shape: Rectangular

• Size: Multisize
• Material: Metal, PVC
• Application: Gas Fitting, Oil Fitting
• Feature: Durable
• Number Of Way: 2way
• Pattern: Plain

In pilot operated valves, the plunger opens up the pilot opening while built-up pressure causes the valve to open and close.Although piloted valves require less electrical energy to operate, they usually need to maintain full power in order to remain in an open state, and they perform at a slower rate than direct acting solenoids. Direct acting solenoid valves only need full power when opening the valve, as they can hold their open position even when operating on low power.

he SVP-7200 pilot operated pressure relief valves are able to operate at considerably higher set pressure than is possible with spring loaded safety relief valves, the valve operation and lift are unaffected by back-pressure. The AST pilot operated safety relief valves are designed and manufactured according to 9723CE P.E.D. and ASME VIII, API527 requirement. They have passed several laboratories tests to obtain the conformance to the Pressure Equipment Directive, PED 9723CE, accordingly to the product regulation EN ISO 4126-4 for use with gas, vapour and liquid. Many other homologations and approvals are available like ATEX, GOST R for Russia and others. Different pilots characteristics are available like pop action or modulating, non- flowing or flowing on dependence of customer needs. AST provide a wide range of materials, flange styles and options to meet the most demanding pressure relief application. Orifice Sizes: From “D” to “T” according to API 526; full bore orifices available. Connections: From NPS ½ x 1 to NPS 8 x 10, also available with double outlet flanges Inlet flanges ratings: Up to Class 2500 Features and benefits – Full nozzle design – Flanged connections can be manufactured according to a wide range of standards – Bubble-tight seats near set pressure allow high operating pressure and are not as sensitive to vibrational and pulsating service – Available with metallic or soft seats – Vertical pilot mounting ensures consistent set pressure and blow-down as contrasted to erratic, horizontally mounted pilots – All pressurized parts are hydraulically tested – The high flow coefficients allow the most economical sizing of the valve – Materials in compliance with NACE standards and wide range of optional exotic materials – A variety of accessories and options are available like fields test connection, field test indicator, backflow pr

In order to provide the extensive demands we are offering our customers a wide range of Pilot Operated Check Valves. These valves are manufactured using high-grade raw material and advanced technology to ensure their adherence with international standards and norms and to ensure high durability and performance. Features: Completely Anti-corrosive Fine-finish & Sturdiness Dimensional Stability Specifications: Type: Modular Type Flow Capacity : 35 LPM/80 LPM Pressure Range: 0 to 315 Bar

• Size: 15 MM To 50 MM
• Voltage: 220V AC / 24V DC
• Design: Pilot Operated
• Type: 2 Way
• Body Material: IC CF8 SS304
• Diaphragm: Nitrile
• Working Pressure: 0.5 to 12 Bar
• Temperature: Upto 85 Degree C Ambient
• Media: Air / Water /Oil / Gas
• Ends Connection: Screwed End BSP (F)

• Pressure: 8 PSI to 180 PSI
• Size: 1/2 to 3 inch
• Temperature: Upto 180 deg C
• Coil Voltage: 12, 24, 48, 110, 230 V
• Col Rating: Continuous Rated
• Model: ISD

・For air, water, oil, heated water, high temperature oil・Body material: Aluminum, resin, C37, Stainless steel and CAC407・With One-touch fittings (resin body) type is available.・IP65

• Port Size: ¾” 1”, 1.5”, 2” BSP/BSPT/NPT
• Max working pressure: 25 kgf/cm2
• Type: Normally open, normally closed
• Temp Range: -20⁰ c to 205⁰c
• Pilot air supply: Equal to or not less than 5 kgf/cm2
• Pilot port size: 1 1/4” BSP/BSPT, NPT
• Nominal bore: 25, 25, 38, 50 and 80

Ryder Pilot Operated Valves are rugged, reliable and have fast response. The pilot operated valve has high flow, two position, and spring return and direction control valve. The valves are used as ON- OFF control valve, Unloading valve in the Pneumatic System, Airdryer , Oxygen Nitrogen Generator etc     Valve housing, Cover, Piston: aluminium Poppet, Guide, Seat Poppet: Brass Seal: Nitrile / Viton Spring, Actuator: Stainless Steel Specifications :

• Size: Multisizes
• Type: Pilot Operated
• Pattern: Plain
• Automatic Grade: Manual
• Feature: Casting Approved, Durable
• Finish: Coated