Pipe Friction Apparatus Dealers

Product Code: EKE 2205The Set-up consists of 2 pipes of different diameters, which are connected in parallel. Pressure tapings are provided on each pipe to measure the pressure losses with the help of a Differential Manometer. Control valves are fitted on each pipe, which enables to use one pipe at a time for experiment. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.Experiments To determine the losses due to fiction in pipes To determine the friction factor for Darcy Weis back equation Utilities Required: Water Supply & Drain Electricity Supply: Single Phase, 220 VAC, 0.5 kW Technical Specification: Pipes (2 Nos.) : Material GI of ½ “ & 1” Diameter Pipe Test Section : Length 1 m Water Circulation : FHP Pump, Crompton / Sharp make Flow Measurement : Using Measuring Tank with Piezometer,Capacity 25 Ltrs. Sump Tank : Stainless Steel, Capacity 50 Ltrs. Stop Watch : Mechanical / Electronic Control Panel : On / Off Switch, Mains Indicator etc. The whole Set-up is well designed and arranged in a good quality painted Structure  

We offer pipe friction apparatus. This apparatus is used to measure darcy's friction coefficient (f) forgiven pipes. The apparatus consists of:  a centrifugal pump of 25mm x 25mm with 12 hp motor (isi make)  m.s. Sump tank 80 ltr. To collect the warer.  m.s. Measuring tank 40 ltr fitted with piezometer tube o measure the discharge. Damper is used to collect the water in m.s mesuring tank for certain time.  g.i. Pipe of internal dia 25.4mm (1") and gunmetal isi mark control valve and regulating valves are used to circulate water.  bye-pass line is also used to regulate the discharge. this apparatus consists of a three g.i. Pipe 12", 34". The pressure tapings are provided 100cm a part on each pipe. Each tapings are connected to the mercury u tube manometer to measure head difference. Hand shuts valves are provided on each pipe to open supply in the pipe. the tanks are well epoxy painted insided to prevent rust hence increase the life of tank. experimental capabilities:  to determine the loss coefficient for different type of fittings.  comparison of pressure across two different types.

• Brand Name: Steco
• Automation Grade: Automatic
• Power: 0.5 HP
• Box Dimension: 2000 x 500 x 1400 mm
• U- tube manometer: 300-0-300 (Mercury filled)
• Sump tank capacity: 100 litres MOC Electroplating Tank (PVC)
• Test Length: 1 M

• Thickness: 10-20mm, 30-40mm, 50-60mm
• Length: 1-1000mm, 1000-2000mm
• Application: Construction
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing, High Strength
• Warranty: 2years

• Feature: Excellent Quality, High Strength, Highly Durable
• Material: Steel
• Phase: 3
• Frequency: 50 Hz
• Finish: Polished
• Usage: Industrial

• Material: Mild Steel
• Country of Origin: Made in India
• Power: 15 A
• Mercury Manometer Weight: 0.5 kg
• Sump Tank Capacity: 140 L
• Phase: Single Phase
• Floor Space: 4.5 x 1m

Two G.I. Pipe lines of size 20 & 25mm with tapings at 2m having a set of individual gate valves & distribution chamber with isolating cocks to facilitate individual experiment on piping system

• Country of Origin: India
• Type: Pipe Friction Apparatus
• Brand Name: UMI
• Material: Alloy Steel

- Orifice and Mouthpiece Apparatus - For Educational Training    

Three pipes nominal diameters approximately connected in a common manifold. Pressure tapping at 1 m distance. Supporting stand structure for the equipment. MS powder coated Measuring tank with drain valve & gauge glass. Differential manometer of 300 mm length with mercury

INTRODUCTION :-An apparatus for determining losses due to friction in pipes of 15, 20 & 25mm. Dia. approx. Consisting of collecting Tank, storage Tank, pump (0.5HP) Control Valves, pressure tapping, Piezometer Board, Stop Clock etc. BASIC SET UP - : 1. STORAGE TANKMade out of fibreglass for corrosion prevention, suitably mounted on a sturdy frame support. Size : 100cm. x 70cm. x 23cm. (approx.)2. COLLECTING TANKMade out fiber glass for corrosion tank. Size of the collecting Tank is 55cm. x 45cm. x 40cm. Capacity approx. 60 liters, fitted with drain valve 1? size piezomenter Tube with calibrated liters Marking scale.3. MONOBLOCK PUMPMonoblock, 1 ph, 1/2HP Pump shall be provided with the set-up which shall be mounted on the base plate. Necessary piping with by ? pass valve & suction piping are provided. The connection for the test equipment is made by flexible Hose pipe. SPECIFICATIONS 1) Three pipes : 50mm, 40mm & 25mm nominal diameters approximately connected in a common manifold.2) Pressure tappings at 2.5 m distance.3) Supporting stand structure for the equipment.4) Measuring tank of 100 capacity with drain valve & gauge glass.5) Differential manometer of 1m length without mercury. RANGE OF EXPERIMENTS :1) To determine coefficient of friction for pipes.2) To plot relation between pressure loss & flow rates for a particular pipe diameter.

Friction in pipes line apparatus: friction in pipes line apparatus to the esteemed customer at highly competitive prices. These pipe lines are manufactured by our team of creative and talented professionals. Moreover, we make available these pipe lines to the customers in varied specifications to meet their exact requirements efficiently. some of the quality attributes are as follows: high efficiency precision engineered durability dimensional accuracy.

• Features: Superior performance, Sturdiness, Easy to operate
• Frame: Made of M.S square tubes & sheets,welded & powder coated.
• Sump tank: Made up of PVC resist corrosion.
• Piping: PVC piping with valves & QRC couplings.
• Mono-block pump: 1-phase 1/2 HP,Make Crompton Greaves or Equivalent.
• Measuring Tank: 25 Litres,Material Rota mould,Make Aristo.
• Capacity: 100 Litres (Approx.)

The setup consists of 2 pipes of different diameters, which are connected in parallel. Pressure tapings are provided on each pipe to measure the pressure losses with the help of a Differential Manometer. Control valves are fitted on each pipe, which enables to use one pipe at a time for experiment. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watc

Pipe friction apparatus, We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

• Material: Mild Steel
• Usage/Application: Laboratory
• Phase: Single Phase
• Power: 1 HP
• Voltage: 240V
• Automation Type: Automatic
• Sump Tank Capacity: 80 L
• Dimension: 250 x 400 x 350 mm
• Frequency: 50 Hz
• Power Source: Electric

• Features: Eco friendly, Hassle free work performance, Modern technology

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Closed Circuit Pipe Friction Apparatus. Piping System: Two G.I. Pipe lines of size 20 & 25mm with tapings at 2m having a set of individual gate valves & distribution chamber with isolating cocks to facilitate individual experiment on piping system Frictional Head Loss: Differential mercury manometer with mercury. Measuring Tank: M.S. Powder CoatingM.S.FRP LiningS.S. Unit of suitable size with an overflow arrangement & Provided with a PVC control valve & an elbow Sump Tank: M.S. Powder Coating MS.FRP LiningSS. Unit of suitable size for storage of water to circulate through experimental unit. Supply Pump Set: 0.5 HP single phase [ISI marked] to pump water from the sump from the sump fitted with a control valve (Gun Metal gate Valve) Main Switch: Single phase main switch Frame Work Mounting: Mounted on frame work & completely fitted with all the above items as self contained unit suitable for operation without and foundation. Services Required: Single phase power supply 200220V & water to fill up sump Tank.

• Brand Name: TAGLab

We are offering pipe fiction. Determine losses due to friction in pipes of different diameter complete re - circulation type equipment compact setup as compared to conventional setup pipes of different diameter are connected to a common manifold with control valves for controlling the flow open channel is supported on a sturdy m.s. Stand & entire setup is mounted on a rigid m.s. Frame flexible hose pipes are used pressure tappings are provided to measure pressure loss to prevent rusting, tanks are made up of m.s. Sheet with powder coating.

The unit consist of two pipes of different diameter. A collect tank is provided to measure the actual discharge. FEATURES Testing of two pipes of different diameters. Measurement of head loss in the pipes at various flow rates. Calculation of pipe friction at various flow rates.   SPECIFICATIONS Sump Tank – 900 x 400 x 400 mm with FRP lining Measuring Tank – 300 x 400 x 300 mm with FRP lining Three pipes of 28 mm, 21 mm.& 17mm. diameter G.I. Pipe. Length of pipe 1 m. Flow control valve. Differential manometer – 400 mm Stop watch.

• Material: Mild Steel
• Phase: Three Phase
• Power: Electric
• Voltage: 220V
• Measuring temperature: 20 to 80 degree Celsius
• Motor Power: 1 HP