Pleated Filters Dealers

• Material: Stainless Steel
• Color: Grey
• Type: Pleated Filter
• Country of Origin: India
• Test Standard: EN1822
• Available Grades: H10 - H14
• Available Efficiencies: 75% - 99.97%

SAF Deep Pleat HEPA [H10-H14] Our SAF HEPA (High Efficiency Particulate Air) filter is constructed from high quality wet laid micro-glass media and uses corrugated aluminum separators. The pleat pitch is designed for minimum air flow resistance and the spacer edges are 'safety rolled' to prevent media puncture. The filter is sealed to the frame with a two - part spongy PU resin to ensure zero leakage and zero transit damage.

• Type: Washable Filters
• Material: Aluminium, G.I, Stainless Steel
• Shape: Square
• Color: White
• Condition: New
• Flow Range: 2000 CFM
• Thickness: 0-50cm

washable pleated pre filter multiple layers of mono filament synthetic woven fabric of suitable mesh size and mono filament thickness stitched with an aluminium expanded metal reinforcement is used as the filtration media. in cases where necessary, aluminium pipes rigidly fixed to the casing with ppcp studs at each pleat act as pleat supports. pleated media for enhanced surface area, higher dust holding, higher air handling capacity & lesser pressure drop. epoxy or pu sealants to bond casing to the filtration media. water washable (refer "handling and servicing" instructions). .

• Type: Filter Bag
• Material: Non Woven, Nylon, PE.PTFE
• Shape: Round
• Thickness: 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm
• Application: Dust Collection, Idustrial
• Color: Creamy
• Pattern: Plain
• Feature: Durable, Eco Friendly, Good Finish, Moisture Proof, Shrink Resistance, Soft

We offer the quality engineered spun bond Pleated Filter Bags that utilize the latest technology to enhance dust removal in demanding or high performance applications. We fabricate high quality Pleated Filter Bags that replace fabric bag filters and cages, used in many dust collectors. Pleated Filter Bags are engineered to fit dust collectors of various sizes and are fabricated to ensure ease of installation and change out. Pleated Filter Bags are easily mounted into various size cell plates for both top and bottom load dust collectors. Features 100% Spun bond media Higher efficiency of 99.97 % Cost effective alternative to fabric filter bags and cages Filter area is 2-4 times larger than traditional bags Open pleat spacing & low consumption of air Specialty finishes to enhance the performance Washable exterior Increase air flow in existing dust collectors Ideal for problem dust collectors Temperature up to 200 degree fahrenheight Smaller housing required for new collectors Lower life cycle cost Applications We can help you to select the Pleated Filter Bag, best suited to your application, based on the following parameters: Chemical content of the filtered dust Characteristics of dust Humidity or moisture They are extensively used in various Pharmaceutical, Blasting & Grinding, Fume Plants, Pneumatic Conveying Industries, etc.

• Country of Origin: India
• Type: Air Filter
• Brand Name: KEL
• Material: Plastic
• Shape: Round
• Color: White
• Condition: New
• Corrosion Resistance: Yes
• Usage: Air Filter
• Specialities: Hassle-Free Functioning, Ease Of Install, High Quality, Durable
• Filter Type: Suction Air Filter

• Length: 10”, 20”, 30”, 40”
• Micron Rating: 0.05, 0.1, 0.2, 0.45, 1 μ
• Inner Diameter Standard: 28 mm
• Outer Diameter Standard: 64 mm
• Operating Temperature: 80° C
• Configuration: Double Open End (DOE), Code 7(226 O’ Ring Flat and Bayonet Design), Code 3(222 O’ Ring Flat and Bayo
• Filter Media: 100% PES Hydrophilic membrane
• Support Media: Polypropylene Fiber
• ‘O’ Rings/Gaskets: Silicone/ EPDM/ Viton

Advantages : Provide broad chemical compatibility. Extremely high flow rates at low pressure drops PES is permanently hydrophilic membrane Cost effective for a variety of aqueous based liquids. No adhesives, binders or surfactants. Reduces downtime & improves throughput. Meets ASTM bacterial validation standards Applications : End point filtration in variety of processes like: Bottle and process water Beer, wine & beverages Serum & blood based products Cell & tissue culture media Diagnostics Microbiological growth media Antibiotics Vaccine preparation Ophthalmic Oral & topical applications Protein solutions Inks, dyes & lacquers Acid, base & solvent filtration  

• Brand Name: MMP
• Length: 5” 10” 20” 30” 40” & 50 Inches
• Outer Diameter: 65mm
• Inner Diameter: 27mm
• Raw Material: Virgin Polypropylene
• Microns: 0.1, 0.2, 0.45, 1, 2, 5 & 10µ
• Construction: Inside and outside perforated core, In between pleated membrane filtration media
• Top & Bottom: DOE (Double open end) SOE (Single open end)
• Flow: 1m3 per hour per 10 INCH at pressure of 2.5kg/cm2
• Temperature: 60 DEGREE C
• Model: Pyoorite

• Material: Plastic
• Shape: Round
• Color: White
• Application: Filter Use
• Country of Origin: India
• Length: 10inch
• Filter Medium Material: Fiberglass
• Recommended Change Out Differential Pressure: 2.5 Bar
• Operating Temperature: 80 Deg. Max

• Country of Origin: India
• Type: Pleated Filter Bags
• Shape: Round
• Color: White
• Pattern: Plain
• Medium Material: Fiber Glass
• Bag Type: Mesh Filter Bag, Pocket Filter
• Usage: Air Filter, Dust Filter, Liquid Filter
• Minimum Order Quantity: 100 Piece

The Pleated Filter Cartridges are used for low flow OEM equipment, recreational vehicles, food service equipment, reverse osmosis systems, Kidney dialysis equipment, humidifying systems as well as applications with pressures of 6 kg/cm2 and with temperature up to 70°C. The Pleated Filter Cartridges are ideal for flow rating and piping configurations.

• Material: aluminium
• Type: Mini Pleat Hepa Filter
• After-Sales Service Provided: yes
• Country of Origin: India

minipleate use in pharma company, operation theater . clean room classified area

• Country of Origin: India
• Length: 10inch
• Application: Filter Use
• Weight: 100-150gm
• Outside Diameter: 30-32mm
• Inside Diameter: 20-22mm

Hydrophilic Polyethersulfone (PES) membrane for aqueous liquid filtration applications.Clariflow® General Grade cartridges are designed for general-purpose use in the filtration of high-purity liquids and aqueous chemicals.

• Type: Highflow Pleated Cartridges
• Shape: Cyllindrical
• Length: 20 , 40 , 60 Inch
• Brand Name: DFI
• Country of Origin: Made in India
• Filter Type: High Flow Pleated Filter Cartridge
• Usage/Application: Oil Refineries, Desalination, Brewer, Chemical , Water
• Diameter: 6 Inch
• Filter Medium Material: Polyproplene , Glass Fiber
• Filtration Capacity Microns: 1,5,10,20,30,40 Micron

• Type: Washable/ Disposable Pleated Panel Filter
• Primary Filter for Air Conditioning and Ventilation Systems Filter Class: G2-f7
• Frame: Al, Ss, Gi, Cardboard
• Media: Blended Cotton
• Separator: Embossed Aluminium Separators, Rod Type Separators
• Initial Pressure Drop: 65 Pa Up to 2.5mis Rec
• Final Pressure Drop:: 13 Pa
• Application Temperature: 70°c in Continuous Service
• Holding Frames:: Front and Side Access Housings and Frames are Available

An Air Filter is a device which removes unwanted large matters from the air. These particles tend to foul the system or human health. Hence Air is supplied in the automobiles, pharmaceutical industries, hospitals, optics fiber industry etc. has filters to remove dust, hair, insects, pollen, fibers, microbes, viruses etc.   FEATURES • Low pressure drop media resulting in lower energy costs• Compact design • Large Media surface area • Fully Supported Media available • Robust construction • Easy installation • Media bonded to case to eliminate air bypass • Progressively built up media • Wide range of media supports

• Type: Pleated Filter Cartridge
• Material: Microfiber, Polyester, Polypropylene
• Shape: Round
• Application: Filter Use
• Length: 10inch, 20inch, 30inch, 40inch, 50inch, 60inch
• Weight: 100-150gm, 150-200gm, 200-250gm250-300gm300-350gm, 350-400gm, 400-450gm, 450-500gm, 50-100gm
• Color: Cream, Off White, White, ANY COLORS
• Outside Diameter: 30-32mm, 32-34mm, 34-36mm, 36-38mm, 38-40mm, 40-42mm, 42-44mm, 44-46mm, 46-48mm, 48-50mm
• Brand Name: Adwyn, Hydrise, Memento, Shell Water, Soft-Tech, TFF
• Inside Diameter: 20-22mm, 22-24mm, 24-26mm, 26-28mm, 28-30mm, 32-34mm, 34-36mm36-38mm38-40mm
• Size: 12mm to 65 mm
• Brand Name: M/S MICROTECH ENGINEERING
• Certification: ISO 9001:2008 AND MSME
• Condition: NEW
• Name: Polypropylene Pleated Filter Cartridge

• Size: Standard & Customized
• Coating: Lugs Type, Collar Type, Flange Type, Tie Rod Fitting, Snap Band Fitting
• Micron Rating: 1, 5, 10, 25, 50
• Media: Polyester, Polypropylene, Nomex, Ryton, Homo Polymer Acrylic
• MOC of Caps: Aluminium, GI, SS, PU Rubber
• MOC of Media: PP, Spun Bonded Polyester, Cellulose Paper, Nomex
• Coating/Finish: PTFE, Antistatic (Aluminium Coating), Oil & Water Repellent

Pleated dust collection cartridges are made up of 100 % spun bonded polyester media, like pleated dust collection bags media with different coatings on it, as per the requirement of applications. Construction-wise Pleated dust collection cartridges are one & the same, they are differentiated just for variation of filtration area. Dust collector’s manufacturers / OEMs can replace conventional tube bags with pleated dust collection bags & cartridges with minor changes in the present equipment design. This polyester media is made up of high tenacity filament yarn without using any binding agent. This hard finished material is very stable against hot gas attack & structurally durable. Thermally tight bonded media provide wash ability, excellent pleat ability, stable structure, fine dust release & good resistance of particle penetration into the media. This filter media is pleated in different pleated depths & heights to accommodate desired filtration area.   Features: High filtration area up to 20 m2 Universal fixing arrangements Open pleat spacing Low consumption of compressed air (for cleaning)  High efficiency due to surface filtration Very high air to cloth ration   Applications: Pharmaceutical Powder Coating Shot Blasting Cement Chemicals Minerals Paints Pigments Power Metal & Steel

• Length: 10
• Size: 64mm OD
• Media: PP, Glass Fiber, PTFE
• Core: PP, SS304, SS316
• Micron: 0.2, 0.5,1,2,5,10
• End Connection: DOE, Code II, Code VII, SOE

• Material: Stainless Steel
• Color: Grey
• Filter Type: Flange Type & Box Type
• Frame Material: Gi (Galvanized Steel) / Aluminum / Stainless Steel
• Filter Media: Glass Fiber Media / Spun Bonded Polyester Media
• Filtration Rating: 0. 3 Micron & More

Mini Pleat Hepa Filters

• Application: Industrial
• Material: Plastic
• Length: 10\" and 20\" also Customize size
• Filter Medium Material: Microfiber
• Diameter: 2.5 and 4 Inch also Customize Size
• Operating Temperature: Up to 40 Degree

• Shape: Rectangular
• Color: Silver
• Brand Name: D.P. Engineers
• Shape: Square
• Filter Type: Air Filter
• Filter Medium Material: Fiberglass