Plunger Tip Dealers

Plunger Tips is a critical part of aluminium Die-casting process. Plunger tips are used to push molten zinc and aluminium through a polished steel sleeve into die cavities, to form intricate parts. Beryllium Copper Plunger Tips have been the standard of the Die Casting Industry for the past 30 years. Beryllium Copper Plunger Tips generally do not last much longer than 9,000 shots under the best conditions and with a relatively small diameter. Above all Copper Beryllium material itself is highly expensive and pose health concerns. CI and tool steels plungers have been used to overcome the disadvantages of cost of CuBe Plungers but lack performance. Steel Plungers are relatively inexpensive but wear out more frequently and have to be replaced regularly, thereby increasing downtime and poor productivity.

• Type: Plunger Tip
• Color: Silver
• Condition: New
• Hardness: 20-40 HRC
• Usage: Die casting

We are a quality-driven firm and make sure that our offerings are properly kept and processed. For this, we have installed all the in-house storage facility that helps us in meeting bulk and urgent requirements of the clients. The products are strictly packed and dispatched safely to the clients stated address and that too in the committed time span.

Based in Gurgaon, Haryana, we are a prominent Manufacturer and Supplier of Plunger Tips. These tips are sturdy, durable, and precise. These are manufactured by using the finest quality raw materials and progressive techniques, in line with the latest industrial standards. Our Plunger Tips undergo a series of strict quality tests, to ensure their reliability. Our clients can obtain these Plunger Tips from us, at the industry leading prices. We offer them in a firm packing material, to minimise the scope of damages during the transit.

• Material: Mild Steel
• Diameter: 50-100 Mm
• Application: Industrial Use
• Color: Silver
• Feature: Durable, Heat Resistance
• Finishing: Coated
• Hardness: 20-40 HRC
• Packaging Type: Corrugated Boxes
• Minimum Order Quantity: As per requirement

Our cast iron plunger tips have been widely accepted and used by reputed firms involved in pressure die casting. High quality and long lasting plunger tips made of FG-260 grade cast iron. Better machining and heat treatment process results in enhanced performance. The plunger tips are ground finished to provide better dimensional accuracy.

• Material: Metal
• Application: Industrial
• Color: Metallic
• Feature: Durable
• Finishing: Polished
• Warranty: 6 Months

Offering a wide range of Plunger Tips for the die casting industry, the company utilizes the best-grade metals as raw materials for production purposes. As a leading Manufacturer, Exporter, and Supplier of Plunger Tips from Gurgaon (Haryana), the company provides a flawless range with good finish. The corrosion-resistant Plunger Tips can be availed in variety of types and sizes.   Manufacture two types of Plunger including Cast Iron(3500-4000 shot), Nickel coated (18000-20000 shot).

• Material: COPPER INTEGRATED WITH STEEL
• TREATMENT: HEAT TREATMENT 46 HRC

  Plunger Tip   RAGA Manufactures quality Die Casting Consumables amongst which Plunger Tips and Shot Sleeves are one of the favorites with the die casters all over the world.   RAGA’s R&D & Design with State of the art CNC/SPM manufacturing and inspection facility carry out continual research into application of Plunger tips. The ongoing quest for optimizing Shots has lead RAGA to indigenous and innovative designs for Plunger Tips.  

Mipalloy manufactures fully machined plunger tips for die casting in mipalloy 4 2% beryllium copper material. Mipalloy has vast experience & capability to machine a wide variety of plunger tips as per customer's drawing. Mipalloy 4 material has very high hardness in the range of 35-40 hrc. Its higher hardness gives higher service life for these tips. All the plunger tips are accurately machined in house in our advanced state of art cnc machine shop which gives our customers perfect repeatable quality plunger tips.

• Features: Perfect finish, Fine quality, High quality material .

Plunger Rods Lubrication is used to minimize the wear to the plunger tip, thus increasing its lifetime and reducing the downtime for replacement. They also help provide a seal around the tip to prevent molten metal from leaking past the tip and causing mechanical problems in advancing and retracting the plunger. The temperatures inside the shot sleeve are typically about 100 degrees C (210°F) less than those in the die.

DCL series is a highly concentrated synthetic, formulated for aluminum, zinc and magnesium die casting operations. It incorporates a blend of synthetic oils with high temperature polymers that enhance its wetting and release capabilities while producing bright and clean castings. The product also contains a unique chemistry that breaks through the leidenfrost effect much quicker allowing the die to cool. This reduces spray time and amounts. Typical operating temperature range is 200°C to 310°C.

• Diameter: 40 mm – 120 mm
• Material: Cast Iron
• Features: High tensile strength., Optimum performance., Longer functionality..
• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other

• Application: Moulding Machine
• Material: Alloy Steel
• Features: Light weight,Anti-corrosive,Easy to install,Optimum strength
• Size: 25mm to 90mm
• Brand: Gurukrupa Engineering
• Grade: EN 36,41B,31
• Usage/Application: Plastic Injection molding machine

• range: 35-40 HRC.

manufactures fully machined plunger tips for die casting in Mipalloy 4 2% Beryllium Copper material. Mipalloy has vast experience & capability to machine a wide variety of plunger tips as per customer's drawing. Mipalloy 4 material has very high hardness in the range of 35-40 HRC. Its higher hardness gives higher service life for these tips. All the plunger tips are accurately machined in house in our advanced state of art CNC machine shop which gives our customers perfect repeatable quality plunger tips. Mipalloy 4, 2% Beryllium Copper (C17200) plunger tips have set the standard for quality in the industry. Enhanced productivity, lower down times, fewer tip problems, consistent performance are the hallmark of Mipalloy 4 plunger tips.

• Material: Cast Iron
• Country of Origin: Made in India
• Feature: 15000 to 25000 shot life
• Diameter: 40mm , 45mm, 50mm, 60mm, 70mm,80mm,90mm,100mm,120mm
• Brand: Febtech

Plunger tips fused in High pressure die casting. This is Copper Titanium Plunger tips which gives good life & good return as compare to conventional Cast Iron plunger tips. We can supply any size suitable to you.

Cast Iron Plunger Tip, Shot Plunger Rod, Pressure Die Casting Line Pipes