Pneumatic Valve Dealers

• Country of Origin: India
• Size: 15-50mm
• Material: Stainless Steel
• Certification: ISO 9001:2008 Certified
• Number Of Way: 2way
• Brand Name: Nalisha
• Pattern: Plain

• Material: Stainless Steel, Carbon Steel, Cast Iron
• Application: Water Fitting, Oil Fitting, Gas Fitting
• Feature: Investment Casting, Durable, Casting Approved
• Type of Seal: PTFE
• Actuator: Double Acting/Single acting with Air Pressure of 8 Bar (Maximum)

• Material: Carbon Steel
• Color: Grey
• Application: Industrial Use
• Valve Size: 12 inch
• Media: Gas

• Material: Cast Iron
• Certification: ISI Certified
• Color: Grey
• Structure: U Section, Pinless
• Finishing: Polished
• Driving Mode: Hydraulic

• Certification: ISI Certified
• Country of Origin: India
• Pressure Rating: 1 to 10 Bar
• Application: Can Be Operated Manually, Automatically, or Remotely Via An Actuator, with Solenoid Options for Auto
• Applications: Common in Automation Systems, Robotics, Packaging, Control Systems, and Industrial Equipment for Precise Air Control.
• Size Range: 1/8 Inch to 3 Inches
• Flow Characteristics: Fast Response Times and Precise Control of Airflow, with Low Pressure Drop.
• Sealing: Uses Rubber Seals or Metal Seals to Prevent Air Leakage When the Valve is Closed.
• Control Options: Can Be Operated Manually, Automatically, or Remotely Via An Actuator, with Solenoid Options for Auto

• Brand Name: Revolve
• Color: Blue
• Country of Origin: India
• Material: Stainless Steel
• Type: Pneumatic Butterfly Valves
• Size Range: 1½” (40 MM) to 12” (300 MM)
• Media: Water
• Working Temperature: 90 Degree C
• Surface Finish: Polished
• Surface Treatment: Hot Rolled
• Pressure (Mpa): 1.0 Mpa
• Material Grade: SS 304

• Country of Origin: India
• Brand Name: Avion
• Body: WCB / CF8 / CF8M / CF3M
• End Connector: WCB / CF8 / CF8M / CF3M
• Ball: CF8 / CF8M / CF3M
• Ball Seat: PTFE / GFT
• Stem Pin: AISI S.S. 304 / S.S. 316
• Gland with Bush: S.S. 304
• Body Seat: PTFE / CFT / GFT / PEEK / TFM
• Stem Seat: PTFE / CFT / GFT / PEEK / TFM
• Nut: M.S. / S.S.
• Stud: M.S. / S.S.
• Washer: M.S. / S.S.
• Gland Fitting Bolt: S.S.
• Actuator: STD

• Connection Type: Flanged & Threaded
• Color: Blue
• Certification: ISO 9001:2008 Certified
• Feature: Durable

• Size: Standard
• Material: Stainless Steel, Cast Iron
• Connection Type: Flanged
• Color: Blue
• Application: Industrial
• Certification: ISI Certified
• Country of Origin: India

The Industrial Butterfly Valves we manufacture has an unique stem hole design in the disc. This product has a strong construction and is heat and corrosion resistant. This valve is highly durable and performs its function of regulating the flow of liquid and gases very efficiently. The materials used in the manufacturing of this are of high quality. Post production, it is sent for a number of quality checks as we want to provide our clients optimum quality products and satisfaction.Features : Corrosion resistance High tensile strength Durability

• Material: Stainless Steel
• Country of Origin: India
• General Design & Manufacturing: EN 593 / API 609 / IS 13095
• Valve Face to Face Dimension: Double flanged Short Pattern to EN593 / API 609 IS 13095 / ISO 5752 series-13
• Top Flange Drilling: ISO 5211
• Valve Inspection & Testing: EN 12266 Part 1 / API 598
• Flange Standard: DIN EN 1092-PN6 / PN10 / PN16 or BS 4504 / Class 150 AW AC 207 Class – B & D

The most sought after design by desalination plants and utility installations, IVDF represents the state of the art rubber lined Flanged double valve, meeting all the user industry requirements. The double flanged body pattern ensures precise installation in pipeline, and can be used as an end to the line valve if required. The unique feature of this valve, is its adaptability for lined pipes, due to negligible disc protrusion beyond the body laying length. The universal square top shaft on valves upto DN200, enables easy change over from hand lever operation to actuated operation when required. Key Features: Fully rubber lined body, with lining extending upto the flange contact face to make gasket free sealing. Ideal valve for installation with lined pipes, since the disc chord interference with pipe ID is negligible. Controlled compression of the gasket face offers optimum sealing and prevents gasket face crushing. Unique triple sealing system, for shaft sealing to ensure zero secondary leakage. Self lubricated PTFE lined bearings, for both drive end and non-drive end shafts, ensures minimum bearing friction. Bi-directional tight shut off sealing from vacuum to rated pressure. Excellent adaptability for actuated operation through standardized ISO top flange. Universal top square shaft enabling direct actuator fitment, after removal of Hand lever, for sizes upto DN200. Choice of seat and disc materials to suit media and operating conditions. Enables installation close to other pipe fittings, without disc interference. Preferred design for desalination plants, municipal water supply and Effluent plants. Adjustable bottom thrust pad / bearing for DN250 and higher to take care of axial thrust loading. DN600/DN650 size provided with “O Ring holder” type drive end shaft sealing arrangement for extra reliability.    

• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch, 4/5
• Material: Carbon Steeel, Cast Iron, PP, Stainless Steel, UPVC
• Certification: ISO 9001:2008 Certified, MSME
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Color: Blue, Red, Sky Blue, White, ANY COLORS
• Structure: Double Half Shaft, Pinless, U Section
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Number Of Way: 2way, 4way
• Brand Name: M/S MICROTECH ENGINEERING
• Type: Pneumatic Butterfly Valves
• Technics: Gear Operated, Hard Sealing
• Power: Hydraulic, Manual, Solenoid
• Pressure: Triple Offset Butterfly Valve
• Port Size: 0.1mm-5cm, 2cm-50cm, 51cm-60 Cm, 6cm-20cm
• MOQ: AS PER CLIENT REQUIREMENT

• Country of Origin: India
• Size: 1 1/2” 36” Inch
• Design Std.: API 609 / BS5155 /ISO5752
• Rating: PN16, PN10,150,300
• Body Materials: CI, DI, WCB, CF8, CF8M
• Disc: Ci, Di, Wcb, Cf8, Cf8m Al, Bronze Even Rubber Lined
• Lining: PFA, FEP, PTFE
• End Connection: To Suit Customer Specification

• Country of Origin: India
• Brand Name: Vision
• Size: 1/2" to 6"
• Air Pressure: 4 Bar
• Temperature: 20 Degree C To 80 Degree C
• Pinion Bearings: High Performance Polymer, Delrin
• Type: Double Acting/Single Acting

• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch
• Material: Metal
• Application: Water Fitting
• Feature: Casting Approved, Durable, Investment Casting
• Pressure: Medium
• Pack Type: Carton Box

• Application: Industrial
• Media: Air, Water
• Material: Aluminium
• Type: Valves
• Pressure: High Pressure
• Automation Grade: Semi-Automatic,
• Finishing: Color Coated

• Material: Alloy Steel
• Color: Blue
• Application: Water Fitting
• Feature: Casting Approved, Corrosion Proof, Durable, Good Quality
• Country of Origin: India
• Condition: New
• Pressure: High
• Type: Pneumatic Diaphragm Valves

• Material: Cast Iron
• Color: Blue
• Application: Industrial
• Size: 3 Inch
• Certification: ISI Certified
• Country of Origin: India
• Type: Butterfly

• Type: Hand Lever/Gear
• Finishing: Polished
• Rating: Pn10, Pn16, Pn20
• Standard Flow Control Lever: Iron/ Steel
• Bearings: Acetal, Brass
• Body Liner: Acrylo Nitrile, Black Nitrile, EDPM, Hypalon , Viton, White Nitrile

Audcu Butterfly valve is a wafer Type Valve with an integrally moulded elastomer body Liner. Designed to outperform Loose Liners , AUDCO Butterfly Valve elastomerliner is moulded directly in the body bore and Vulcanised in-situ making it last the entire life of the valve. The result  a valve that requires no form of maintenance. A perfect FIT and Forget VALVE.

• Country of Origin: India
• Size: Upto 20 Inch
• Material: Carbon Steeel, Stainless Steel
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Feature: Investment Casting
• Brand Name: MATOS
• Type: Pneumatic Ball Valve
• Pressure: High, Low, Medium
• Port Size: Up To 20

• Material: Metal
• Automatic Grade: Manual
• Packaging Type: Carton
• Finishing: Polished
• Specialities: Durable, Casting Approved