Polyester Yarn Dyeing Machine Dealers

SMDY ENERGY SAVING The consumption of water, chemicals, electrical energy, thermal energy and the wasted water are important cost factors in every dye house. With this machine all these factors are dramatically reduced, measured and controlled. Right-first-time in dyeing is now assured by lower differences inside-outside the packages, while savings of electric energy, water, chemicals, steam and compressed air will bring extremely fast payback times over the initial investment cost. New SMDY sizes are from 5 kg to 1500 kg. This machine with this particular pump and inversion group allows to treat polyester textured high density till 0,5 Kg/l as well as very soft material like silk 0,3 kg/l density in order to process every kind of material you can have in your dye house. In particular can dye bobbin 1.8 kg cotton, 2,4 kg acrylic, polyester 4 kg or 10 kg tops or muffs, tow, flock or beams   Main advantages are: Possibility to dye with liquor ratio from 1:3.5 using in to out single circulation with material not fully covered. Reduce consumption of chemicals, dyes, water and steam due to low liquor ratio facility. Reduce power consumption of main pump because pipes are designed to avoid losses of pressure so that main pump is exploited in the best way. High efficiency motor and inverter reduces power consumption as well. Possibility to dye also in traditional way: air pad, material fully covered and flow circulation in to out and out to in directions.     Yarn dyeing, reinvented! 70% savings on electric energy 30% savings on water, chemicals and utilities Improved yarn dyeing quality Faster payback times Sustainable yarn dyeing This is our new SMDY yarn dyeing machine! Yarn dyeing, reinvented! 70% savings on electric energy 30% savings on water, chemicals and utilities Improved yarn dyeing quality Faster payback times Sustainable yarn dyeing. SMDY FEATURES: • Standard design and manufacturing features:• Nominal loading capacities from 5 to 1500 kg. • Pressure rating of 5.0 kg/cm2, up to 160°C tempera-ture, temperature lock at 140C.• Construction in AISI 316 stainless steel, for all thepart in contact with dyeing liquor.• Water protected motors (IEC Standards I).• Waterproof electrical equipment • Three-level safety systems..• Heat exchangers rated for 15.0 kg/cm2 operatingpressure.• Heating gradient 5°C./minute (range 20-80°C steampressure 6.0 kg/cm2) Cooling gradient 3°C./minute(range 130-108°C water temp. 15°C, pressure 1.5kg/cm2).• Pneumatic lid lifting and lowering.• Rapid lid locking system.      

Liquor dosing by highly efficient over head mounted JOGSON Pneumatic Actuated Distribution system Automatic dyeing cycles, high productivity, 1 dyeing cycle in about 60 seconds Suitable for any type of yarn natural or synthetic, wound on dye spring, plastic tube, steel tube, etc. Suitable for dyestuff like Acid, Reacted , Direct, Disperse and Pre-metallized Multiple design possibilities Power control panel with PLC & touch interface Floor level installation Individual colour tanks for stocking dyestuff Step Working Package Preparation : The yarn must be wound on Dye Spring, Plastic Tube, Steel Tube, etc. Recipe preparation : The chemicals & dye-stuff are mixed & put into colour tank Dyeing process : It starts with transferring of mixed liquor from each colour tank to overhead dosing cylinders & distributed uniformly to the package. The uniformity of the printed package is guaranteed both by JOGSON Pneumatic Actuated Distribution system mated with high suction of the vacuum pump Dyestuff Fixation : After dyeing, the package are placed in JOGSON Yarn Conditioning Machine for dyestuff fixation. The process of heat setting & conditioning varies on the type of yarn Washing : To wash out the excess dyestuff the package is then placed in JOGSON yarn dyeing machine Drying : Depending on the Yarn, JOGSON Hydro Extractor or JOGSON Hot Air Drier can be used to dry the wet package

To protect our entire range of products from external factors that can be damaging, we have a state-of-the-art packaging unit equipped with the latest secure packaging technologies and materials. We are instrumental in offering the exceptional assortment of product that are deigned and manufactured only after complete examination of the raw materials and inputs used. Features : High performance Excellent efficiency Smooth operation

• Voltage: 380 V
• Power Consumption: 5 kW
• Phase: Single Phase
• Corrosion Resistant: Yes
• Type Of Fibers: Silk, Polyester Etc.
• Usage/ Application: Textile Industry
• Brand: Hero
• Material: Stainless Steel
• Capacity: 100 kg/hr
• Automation Grade: Semi-Automatic

• Voltage: 220V - 380V
• Phase: Three Phase
• Body Material: Stainless Steel
• Brand Name: SRE
• Surface Finish: Polished
• Frequency: 50 Hz
• Grade: SS 316

• Condition: Used
• Phase: Single Phase
• Machine Type: Semi-Automatic
• Body Material: Mild Steel
• Frequency: 50Hz
• Power Source: Electric
• Voltage (V): 220-240V
• Capacity: 200Kg

polyester yarn dyeing machine

polyester yarn dyeing machine, Dyeing Machine, hank yarn dyeing machine