Polymer Adhesives Dealers

• Type: Acrocoat117
• Color: White
• State: Liquid
• Application: Roller
• Packaging Type: HDPE Drums
• Packaging Size: 50 / 220 Kgs
• Tape: for BOPP Tape

Acrocoat117 is based on Acrylic Polymer Emulsion. It has very high tack, good Shear Strength with instant bond & non-migrating properties, due to which the long term durability is better. It is mainly used for B.O.P.P. 

• Colours: Grey & White
• Mixing Ration: 5.6 to 6.4 Ltrs/ Bag 20 Kg Peak
• Pot Life: ≥ 4 Hr
• Open Time: ≥ 30 Minutes
• Adjustability: ≥ 45 Minutes
• Bed Thickness: 3mm To 10mm
• Grouting: 8 Hour On Wall / 24 Hour on oor
• Shear Adhesion After 28 Days.: ≥ 1 Mpa, ANSI A-118.1
• Tensile Adhesion On Concrete After 28 Days: ≥ 1 MPa, EN 1348
• Durability Test: Adhesion After Heat Agening: ≥1 MPa, EN 1348
• Adhesion After Water Immersion: ≥1 MPa, EN 1348
• Adhesion After Freeze Thaw Cycles: ≥1 MPa, EN 1348
• Working Temperature From Conformity: C2 TE, EN 12004
• Coverage: Approximately 55 to 60 sqft for 20 kgs bag with 6mm x 6mm square notch trowel for a bed of 3 mm
• Shelf Life & Storage: 12 Months with original packing in dry storage condition. Health & Saftey Precautions : Use Gloves.

• Brand Name: Astric Industries
• Country of Origin: India
• Material: A-STARK,A-STARK
• Color: Grey,grey
• Type: Foam Adhesive

A high-performance polymer-based adhesive to be mixed with water installing wall-small & floor-medium format ceramic tiles, vitrified tiles.   APPLICATION Designed for interior floor & wall areas.   ADVANTAGES ⦁ For fixing ceramic, vitrified tiles & natural stone on interior flooring ⦁ Ideal for tile-on-tile & new flooring  ⦁ High bond strength  ⦁ Single component -Just add water   Installation Guide for ASTRIC™ A-STARK   Surface Preparation:   ⦁ Ensure all surfaces are structurally sound, clean, and free of dirt, oil, grease, loose paint, laitance, concrete sealers, or curing compounds.   ⦁ Proper surface preparation is crucial. Remove any demolding wax powder from the back surface of the tile. If a fiber mesh is present on the back surface, ensure it is completely removed before proceeding with the installation using ASTRIC™ A-STARK.   ⦁ Dry, dusty concrete or masonry surfaces should be moistened, and any excess water should be removed. You can install it on a damp surface. New concrete slabs need to be damp-cured and must be 28 days old before applying.      Material Preparation & Application:   Mixing Procedure:   ⦁ Place clean, potable water into a clean mixing bowl. Add ASTRIC™ A-STARK Super Flex powder. Use approximately 5.5–6 L of water for 20 kg of powder. Mix with a low-speed paddle drill to achieve a smooth, paste-like consistency. Let the mixture stand for 5-10 minutes, then stir again before use. Stir occasionally without adding more water. Properly mixed, troweled ridges should stand without slump.     Mixing Ratios:   ⦁Mix 5.5-6 L of clean water with a 20 kg bag of mortar.

• Country of Origin: India
• Type: Bopp Self Adhesive Tapes, Packaging Tape
• Material: BOPP, BOPP Film
• Color: White, Brown, Colour
• Adhesive: Self Adhesive
• Adhesive Side: Single Sided
• Certifiacation: Partnership
• Brand Name: Lotus for 36 & 38 Micron

Your Premium Provider  Manufacturer of BOPP Self Adhesive Tapes    Sunrise Polymer are well known Manufacturer  of  BOPP Self Adhesive Tapes. Sunrise Polymer is well known for the best quality products and service. SUNRISE POLYMER has made a name for itself in the list of top Manufacturer of Adhesive Tapes in India. The Manufacturer company is located in Chandausi, Uttar Pradesh and is one of the leading sellers of listed products. Buy Adhesive Tapes in bulk from us for the best quality products and service.    This tape is manufactured using high grade BOPP Film and Adhesive with advanced technology. This tape fit perfectly in various tape dispensers according to different sizes. The use case for this tape is vastly spread across various application categories and places. This tape can be used at home office school art craft packaging shipping binding sealing and so on.    The selection of products manufactured by SUNRISE POLYMER are not only of the highest quality, but are also available in a variety of options to ensure you find exactly what you’re looking for. With top-of-the-line materials, cutting-edge technologies for production and our experienced support team, we guarantee complete satisfaction.    We are Manufacturing exclusive range of Bopp Self Adhesive Tapes. These are available in various Width & Length. We also provided you a Colour per your requirement. These are provided in various standard specifications and can also be further customized as per exact demands of our clients.    We offer logo printing on BOPP tapes as per the client's requirements. These tapes are effective in automatic packing machines. These tapes are procured from vendors who use thin strong filming and water-acrylic based Adhesives. Moreover, these tapes find application in sealing boxes and packages.    With their extensive experience of Manufacturing and trading Adhesive Tapes, SUNRISE POLYMER has made a reputed name for themselves in the market with high quality Adhesive Tapes, Printed Tapes, Madking Tapes, etc Focusing on a customer centric approach, SUNRISE POLYMER has a pan-India presence and caters to a huge consumer base throughout the country.   Width and Pack Size Width (mm)     9 12 18 24 36 48 60 72 Rolls/Carton   384 288 192 144 96 72 60 48    Transparent Tapes, Brown Tapes, Colour Tapes, Masking Tapes, Paper Tapes, Double sided Tapes, Printed Tapes, Designed Tapes, Logo Designed & Printed Tapes, Carton Tapes, Adhesive Tapes.   Features : Self Adhesive Tape Strong Adhesion  Long Lasting Performance  Easy to use & Tear Multiple Usage Weather Proof  Guaranteed Length  Guaranteed Thickness  High Tensile Strength & Durability  Superior Holding Power Best sourcing capabilities Global market presence Competitive prices  Timely delivery of consignments Superior quality of products. 100 % Assured Length  "Made in India"    Excellent holding power so the package stays sealed. Wide service temperature range good for most applications. Easy adherence to even slightly irregular surfaces  

• Type: Tile Adhesives
• Material: Equivalent
• Application: Tiles Use
• Color: Light Grey
• Feature: Waterproof
• Country of Origin: India
• Brand Name: VITCON 211 TILE FIX

vitcon 211 tile fix is a cementitious base powder specially formulated for adhesion of ceramic tiles and marble cladding to building surfaces. vitcon 211 tile fix is comprised of selected grades of portland cement admixed with synthetic polymeric additives to suit various requirements of thick/thin bed performance.technical specifications appearance light grey powder storage away from direct sunlight. shelf life 12 months.   applications   addition of water in powder at the ratio of approximately 12 or 13 by weight depending upon the requirement in consistency for different applications. gently stir the mix with trowel until a uniform thick consistency is achieved. apply the mix directly to the surface and press the tile firmly over it. the process can be alternated with applying the mix to the back of the tile and pressing it on the surface. tiles used should be pre-soaked in water. a 3mm thickness between tile and the surface is recommended for better performance. remove the surplus mixture from the tiles with a damp cloth. we recommend leaving the tiles for 24hrs after fixing before filling the joints with vitcon 212 tile jf or equivalent material.

•Dispensing & Stencil Printing Application •Excellent Thixotropic Property •Low Temperature & Rapid Cure •Excellent Bonding Ability •Able to Maintain the Shape After Application •Syringe, Cartridge & Jar Packing Available •ROHS Compliant.  

We are well-known firm of Polymers Adhesive. In addition, quality experts also check the quality of this product on varied industry standards. Besides, we offer this product at nominal costs.     

• Application: Tiles Use
• Feature: Antistatic, Waterproof
• Adhesive: EPP Fiber Base
• Open time: ≥ 30 minutes
• Purity: 99%
• Pack Size: 20kg

• Type: Adhesives
• Material: Adhesive
• Application: Bathrooms, Ceramic, Tiles
• Color: White, Yellow
• Purity: 90%
• Feature: Antistatic
• Form: Gel
• Adhesive: Acrylic Based
• Adhesive Side: Double Sided

We are the main supplier of this product.

• Color: White, Black, Grey, Brown, Beige, Alu Grey
• Packaging:: 290ml

Super Strong SMX Hybrid Polymers   Fix ALL High Tack is a high quality, neutral, elastic, 1-component adhesive sealant based on SMX-Polymer with a very high initial tack. Fix ALL High Tack is a KOMO-certified construction adhesive based on BRL3107.       Applications:   • Sealing and bonding in the building and construction industry. • Elastic bonding of panels, profiles and other pieces on the most common substrates (wood, MDF,     chipboard, etc). • Elastic structural bonding in car and container industry. • Joints in bathrooms and kitchens. Characteristics:   • High initial tack reducing the need for initial support. • Fast curing. • Good extrudability. • High shear strength after full cure (no primer). • Stays elastic after curing and very sustainable. • Impervious to mould, contains ZnP (biocide with fungicidal action). • No odour. • Can be painted with water based systems. • Good colour stability, weather and UV resistance. • Does not contain isocyanates and no silicones. • Good adhesion on moist substrates. Product Features   • Fix ALL High Tack is a igh initial tack reducing the need for initial support. • Fix ALL High Tack used for sealing and bonding in the building and construction industry. • Fix ALL High Tack has high shear strength after full cure (no primer). • Fix ALL High Tack stays elastic after curing and very sustainable. • Fix ALL High Tack can be painted with water based systems. • Fix ALL High Tack has ood colour stability, weather and UV resistance. • Fix ALL High Tack has does not contain isocyanates and no silicones. • Fix ALL High Tack has good adhesion on moist substrates.    

• Type: Moistfree Polymer Adhesives
• Application: Tires, Tire treads, Carcasses, Belting, Hoses , Inner tubes, Automotive components
• Form: Powder
• Colour: White
• Certification: ISO Certification 9001-2008
• Packaging Size: 0-5kg,5kg-10kg,10kg-15kg,15kg-20kg
• Packaging Type: Plastic Bag

• Material: Polyurethane
• Packaging Type: Drum
• Packaging Typ: 30 Kg
• Morphology: Solvent

• Form: Liquid
• Colour: Transparent , Light Yellow
• Packaging Type: Plastic Bucket,Plastic Bottle
• Packaging Size: 0-10kg,10-20kg,20-30kg,40-50kg
• Uses: Industrial
• Purity: 80% - 90%,99.99%

Silylated Polymer Adhesives are a part of these last years’ recent developments. Silane-modified adhesives and sealants based on SMP (Silane modified polymer) are designed as onecomponent systems.

• Form: Liquid,Gel
• Packaging Size: 0-5kg,5kg-10kg,10kg-15kg,15kg-20kg,20kg-25kg
• Type: Latex Based
• Colour: White
• Packaging Type: Polymer Bonding Adhesive

• Brand Name: Weber
• Color: White
• Compressive Strength: Greater than 9 Mpa (at 28 days)
• Open Time: 15-25 minutes
• Adjustment Time: 10 minutes
• Shelf Life: 1 year from the date of manufacturing,for unopened bag,stored in dry condition

• Features: Flexibility ,Longer life, Accurate composition.
• Item Code: Tuff-Bond-202SE
• Types: Epoxies
• Form: Liquid
• Usage/Application: Wood
• Curing Method: Heat Activated Curing
• Packaging Type: Drum
• Grade Standard: Industrial Grade
•  :