Portable Density Meter Dealers

• Certification: CE Certified
• Application: Industrial, Residential
• Display: Local
• Automatic Grade: Semi Automatic

features density range: 0 to 5g/cm3 operational flow rate ranges: 0 to 50 l/min measured variable available in standard 4-20 ma output signal or hart communication protocol direct measurement of density, reference density or concentration robust construction leads to long life and high reliability very high accuracy and repeatability simple installation resistant to vibrations and pressure changes or flow rate changes   applications major applications for dimf series are process control and quality monitoring of fluids in all areas of industry. The device can be used for density mass flow conversion for custody transfer in connection with corresponding volumetric meters and flow computers.

• Material: Aluminum
• Driven Type: Electric
• Automatic Grade: Automatic
• Application: Industrial
• Voltage: 220V
• Type: Automatic Density Meter
• Warranty: 2 Years
• Country of Origin: India
• Display: Local
• Range: 0- 200 gms
• Opearting Temperatue: 10-50D/C, 50-100D/C
• Brand Name: CMI
• Accuracy: <=1%

This machine is used for determination of theoretical density of asphalt mixer by vacuum method for applications such as asphalt mixer design, road condition investigation, calculation of porosity and compactness in the road construction quality management. The equipment has a main body fitted with vacuum gauge, two vacuum containers, vibratory table and control panel. The vibratory table operates on manual and automatic mode to release the entrapped air from the asphalt sample. Suitable for operation on 220V, 50Hz, 1phase, AC supply.

• Type: Soil/Material Testing Equipment
• Application: Used for measuring bulk density of soils, powders, and granular materials
• Capacity: 3,5,10,15,20,30 Liters
• Material: High-Quality Stainless Steel or Durable Plastic
• Volume Measurement: 3L,5L,10L,15L,20L,30L graduated cylinder for accurate volume readings
• Durability: Resistant to corrosion, heat, and chemicals (depending on material)
• Calibration: Factory calibrated with optional field calibration kit available

Discover the unparalleled performance of Bulk Density 3L,5L,10L,15L,20L,30L exclusively available at India Geo Survey, your trusted provider of high-quality land survey products and equipment. Specializing in advanced tools, we ensure precision and reliability in every product. Designed for professional use, Bulk Density 3L,5L,10L,15L,20L,30L offers accurate bulk density measurements essential for comprehensive soil analysis. With its user-friendly design and top-notch build quality, it's an indispensable asset for any surveyor seeking immaculate results. Enhance your surveying efficiency with Bulk Density 3L,5L,10L,15L,20L,30L and experience the excellence that defines India Geo Survey.

• Density cup- Cube volume: 16.39 0.05 cubic cm
• Density cup - inner diameter: 28.30 0.20 mm

Bulk density meter distance between bottom funnel lower opening & top of the density cup: 19 mm (34 in.). Instrument stand: Level & vibration free.

• Application: Industrial
• Color: Grey and white
• Features: Light weight makes it easy to operate, Sampling volume and speed is single-hand controlled,Viscous liquids up to 2000 mPa*s can be measured.
• Item Code: AGARAM-DM
• Applications: Beverages, Foods,Petroleum,Chemical products ,Pharmaceuticals,Alcoholic beverages,Industries.
• Temperature Range: 40 Degree Celsius
• Hydrometer: Digital
• Measuring Range: 2.0000 g/cm3
• Model Number: DA130N
• Pack Type: Carton Boxes
• Sampling: Syringe type hand pump
• Data storage: 1,100 samples
• External output: IrDA for Personal computer

• Brand Name: Rudolph Research Analytical
• Application: Industrial, Laboratory
• Range: 0 To 3 G/cm³
• Color: Grey
• Condition: New
• Minimum Sample Volume: Less than 1mL
• Accuracy: ±0.0002 g/cm³
• Temperature Range: 0°C to +50°C
• Preesure: 0 to 10 bars
• Temperature Accuracy: 0.01 Degree Celsius
• Shipping Weight: 23 Kg
• Internal Memory: 32 GB Non-removable Compact Flash

• Feature: Durable, Light Weight, Stable Performance
• Material: Metal
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant
• Size: 3x15x30

A Bulk Density Meter is used for determining the unit weight of aggregate. Our Bulk Density Meter is made from sheet iron and acknowledged for features like sturdy construction, corrosion resistance and durability. Our Bulk Density Meter is completed with handle. It is available in different capacities like 3 liters, 5 liters, 10 liters, 15 liters, 20 liters, etc. We also provide a set of set of 3x15x30.

• Weight: 15 kgs
• Dimension: 280 mm x 290 mm x 275 mm

Powder Density is specially designed to study the packing down of powder beds of different pharmaceuticals and chemicals powders, flakes, pellets, granules and other bulk substances. Powder Density is an essential test required in the process of tablet manufacturing, Capsule filling and cosmetic manufacturing. The Powder density apparatus is equipped with Microcomputer Based 'LCD Display' System. The "Switches" are provided on the front panel of the apparatus for setting total number of strokes to the glass cylinders. Each stroke of the cylinder is displayed on the "LCD Display' window on the panel. The Up and down movement of the cylinders stop automatically at the Pre-set number.

We are offering portable meter. Meco-g portable type instruments are electrodynamometer type watt var p.f. Instruments. They can be used in single phase, three phase three wire and three phase four wire system and are designed to be used in horizontal positions.

Complies with USP, IP specifications Extremely useful for pharmaceutical labs Microprocessor based, easy to use 20 x 4 line alphanumeric LCD display with backlit 16 Soft touch membrane type keys Independent programmable setups for User & USP mode with storage Microprocessor Tap Density Tester, Model 1951 is a density measurement equipment used to measure tapped density of powders, as well as granulated or flaked materials by standardized and repeatable procedures. Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.

  In-tank Density Meters DC-40 SERIES   LEMIS process use the proven vibrating element technique which is widely accepted as the most accurate method of continuous online density measurement, LEMIS process engineers made new developments by the introducing unique proprietary design of resonant tube sensor allowing accurate measurement of liquid density. An integral high accuracy Pt-1000 probe continuously monitors liquid temperature allowing temperature compensation and future calculation of reference density, concentration or specific gravity. The technology proves high accuracy of measurement and long term calibration stability even in severs operation conditions. It is insensitive to plant vibration, high variation of temperatures, level, mix or turbulence. A choice of wetted parts materials: from stainless steel for general industrial use, Ni-Span-C for most demanding applications, and Hastelloy for applications where ultimate corrosion resistance is required.   Features - Continuous, on line density monitoring at process conditions - Accurately measures density of liquids with viscosity up to 2000cSt - Rigorous factory calibration and testing of the transducer - Can operate in pressurized tanks - Immersion in the tanks up to 30 meters - No moving parts, virtually maintenance-free system - We also can tune system specification for your specific requirements - Hazardous area approvals - Insensitive to liquid level, mix or turbulence - Large offer of standard product configurations and installation available   - Density, temperature and concentration monitoring in storage tanks - Petroleum products, fuels, lubricants, LPG, LNG - Concentrations of acids or corrosive chemical - Food, Dairy & Beverages - Product identification and consistency - Concentration and dilution measurement - Monitoring of reaction end in reactors - In-tank mixing and blending

• Type: Automatic Density Meter
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Application: Industrial, Residential
• Color: Brown, Green, Grey, Maroon, Red, White
• Voltage: 110V, 220V, 230V, 380V, 440V, 450V
• Driven Type: Electric
• Feature: Accuracy, Digital Water Meter Display, Lorawan Compatible
• Warranty: 1 Year, 6 Months
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic

Ideal for installation in pipe lines for continuous measurement of density of liquids. Available in different materials of construction and in screwed or flanged type connection. Measuring Range : a) 0-1 gcm3 b) 0-2 gcm3 c) 0-3 gcm3

• Port: Ahmedabad
• Model Number: AS-K1-301
• Packaging Details: STANDARD FOR EXPORT
• Place of Origin: Norway

• Accuracy of compensation D.O: ± 3%

ME 983 : Portable Dissolved Oxygen 3½ digit LED display along with GoldSilver probe Battery operated.(Portable)

• Brand Name: METTLER TOLEDO
• Application: Laboratory

We are offering tap density meter fast & accurate way to determine tapped density.

• Power Source: Electric
• Material: Mild Steel
• Packaging Type: Box
• Density Accuracy: 0.001 g/cm3
• Measurement Range: 0.000 to 2.000g/cm3
• Temperature Range: 40 Degree Celsius

Asphalt Mixer Theoretical Density Meter (AIM 582)   This machine is used for determination of theoretical density of asphalt mixer by vacuum method for applications such as asphalt mixer design, road condition investigation, calculation of porosity and compactness in the road construction quality management.The equipment has a main body fitted with vacuum gauge, two vacuum containers, vibratory table and control panel.The vibratory table operates on manual and automatic mode to release the entrapped air from the asphalt sample.Suitable for operation on 220V, 50Hz, 1phase, AC supply.     Application For determination of theoretical density of asphalt mixer Industry Civil Infrastructure Asphalt / Petroleum/ Bitumen Testing Dams & Tunnels Real Estate Roads, Highways & Bridges Traffic Monitoring Education Building Technology Civil Department Geotechnical Science Colleges Traffic & Transportation Roads, Highways & Bridges    

• Type: Bitumen-Asphalt Testing Equipment
• Power: Electronic
• Feature: Good and stable performance
• Certification: ISO9001:2008
• Usage: Relative Density Meter
• Testing method: Dual-drum testing
• Supply voltage: 110V-220V

We are the main supplier of this product.

• Type: Portable Density Meter
• Material: Aluminum, Brass, Cast Iron, Plastic, Stainless Steel
• Application: Industrial
• Color: Brown, Green, Grey, Maroon, Red, White
• Voltage: 110V, 220V, 230V, 380V, 440V, 450V
• Driven Type: Electric
• Feature: Accuracy, Digital Water Meter Display, Spiral Water Meter
• Warranty: 1 Year, 2 Years, 6 Months
• Display: Local, Remote
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Opearting Temperatue: 10-50D/C, 50-100D/C

• Warranty: One year
• Country of Origin: Made in the U.S.A.
• Features: Compact, Lightweight (<15LB) ,High Resolution,High benefit-to-cost ratio,Built in RTD & 4-20mA temperature transmitter, Frequency output for density calculation with customer-owned flow computer.
• Available Density: 4-20mA output
• Applications: Interface Detection, Live Density Monitoring ,Product blending ,Process quality control.

• Type: Automatic Density Meter
• Material: Aluminum, Cast Iron, Plastic, Stainless Steel
• Application: Industrial
• Color: Brown, Green, Grey, White
• Feature: Accuracy, Digital Water Meter Display, Spiral Water Meter
• Voltage: 110V, 220V, 230V, 380V, 440V, 450V
• Driven Type: Electric
• Warranty: 1 Year, 2 Years, 6 Months
• Display: Local, Remote
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic

RUDOLPH DENSITYMETER DDM RANGE: All the models of the DDM range are totally automatic, digital and have a built-in, touch-sensitive screen. They can control the temperature of the sample through electronic heating and cooling – Peltier method. The VideoView which is patented in the name of Rudolph comes with the basic unit. The entire U-tube is also scanned with a 10X camera. This ensures even the smallest bubbles to be magnified 10 times and the images are shown live in the screen. The range is between 0 – 3 g/cm3. The min volume of sample required is 1ml. The systems are equipped with 5 USB Ports, 2 RS232 Ports, Ehternet Port for Network Connection, Keyboard, Barcode Scanner, Mouse, Network capabilities. They have a built-in 8GB Non-removable Compact Flast Internal Memory and the entire system would be driven by Embedded Win 7 OS. With calibration in one temperature the system works throughout the temperature range. Models 2910 & 2911 can also be equipped with a 21CFR Part 11 module and it is easily enabled through the digital touch screen and come with either NIST or UKAS traceable standards. The differences between the various models lie in the resolution, repeatability and accuracy. Baumé of Hydrochloric Acid Normality of Sulfuric Acid Density of Gasses and Aerosols Drug to Propellant Ratio Lead Content ppm Gold in Acid % Toluene in Heptane Fat in Lubricant Mole Fraction of Methanol % HNO3 Monomer Solutions Hydrogen Peroxide Molar Solutions of EDTA SG of Urine Sweeteners Sodium Hydroxide

• Brand Name: Anton Paar
• Weight: 13.5 kg
• Power: AC 100 to 240 V; 47 to 63 Hz; DC 24V,3A
• Application: Laboratory
• Size/Dimension: 375 mm x 265 mm x 180 mm
• Supply: AC
• Minimum sample volume: Approx. 1 mL
• Grade: Automatic
• Material: Metal
• I Deal In: New Only