Potentiometric Titrator Dealers

We are offering automatic potentiometric titrator. Model at 38 c is an analytical instrument in the field of electrochemistry. It is micro controller based titrator for chemical analysis. It is versatile chemical testing instrument with utmost ease of operation. The wide range of applications are possible with this automatic potentiometric titrator as it is having dosing unit with high accuracy and reproducibility. The auto titrator is not simply digital potentiometric titration apparatus but has flexibility & good scope to select right parameters for right applications making it a fully programmable potentiometric titration apparatus. It has a facility to choose the method itself which can perform a given titration. The titration method development thus becomes a sure way to get the correct results with respect to concentration and tolerance limits. It is possible to store the developed method and recalled for that application. The system is user friendly and the data obtained is tamper proof, authentic & supported by statistics and software provisions to keep the result secured. With wide range of accessories it becomes a complete chemical testing equipment for titrimetery.

Micro-controller based, easy to operate advanced automatic titrator. Reliable and accurate dispensing system for uninterrupted operations. PS2 key-board (alpha – numeric) interface for quick data entry. Graphic display for user friendly operations. Speed mode adjusts speed of titrations. Step volume mode for routine titrations. Result units in Percentage Assay, TAN, TBN etc. Supports two methods for Normality : standard  sample and volumetric. Parallel port printer interface. Printout formats as per GLP requirements. Memory stores up to 100 methods of analysis. Pass word protected data.

We are offering automatic titration apparatus. Characteristics: 1.modular design consisting of three sections: capacity titration unit (can be replaced by coulomb titration unit), control unit ( can be replaced by pc titration software) and measurement unit (including measurement of potential, conductivity and constant) to realize potential titration, coulomb titration, conductivity titration and constant titration. 2.touch screen control, easy to operate. 3.titration software control to realize all kinds of operation. 4.electricity cutting off protection. 5.special titration modes of pre-titration, pre-setting terminal titration, empty terminal titration or manual titration to expand the range of application. 6.titration system made of perchloric acid resistant materials to make nonaqueous titration possible.

• Weight: 15 kg approx.
• Water content measuring range: 50 PPM to 100% with appropriate sample quantity.
• End Point Confirmation Time: 20 sec fixed.
• mV range: 0 mV to + 4000 mV.
• Dispensing resolution: 0.01 ml.
• Recommended Printer: EPSON 80 Column Dot Matrix Model LX 300 +.
• Memory Storage: 100 Test Methods’ Data.
• Display: 256 x 64 LCD Backlit Graphic Display.
• Input: 4 x 4 Feather Touch Key Board + PS-2/PC Keyboard.
• Temperature: 5 – 40 0C.
• Humidity: Less than 85 % RH, Non condensing.
• Dimensions: 42 x 35 x 30 cm.
• Power Supply: 230 ± 10V AC, 50 Hz, Power 50 W Max.

• Brand: TOPLAB INDIA
• Temperataure Capacity: 100 Degree Celsius
• Country of Origin: India,India
• Warranty: 1 Yr
• Type: Automatic Titration Apparatus, Automatic
• Feature: Easy To Use, Proper Working, Superior Finish, Auto Level Adjuster,Modular Design,Auto Degassing System,Real Time Titration Curve
• Certification: ISO 9001:2008 Certified, CE Certified
• Application: Laboratory, Environmental Analysis,Water Analysis,Food Analysis,Chemical Analysis
• Power Source: Electric
• Automatic Grade: Automatic, Fully Automatic
• Condition: New
• Color: White, Blue,White And Blue

• Certification: CE Certified
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year
• Use in: Laboratory

The Acid/Base Titrator.Everything you need for automated acid/base titrations. Determine acidity in juices, milk, and wine, p-and m-values in water, and much more. Simple & Affordable Swiss engineering, and the highest quality parts and materials, make this compact and accurate titrator a perfect addition to any quality laboratory.

• Color: White & Black
• Brand Name: Xylem
• Material: pvc
• Usage/Application: All type of potentiometric Titration
• Model Name/Number: SI Analytics
• Shape: Rectangular
• Automation Type: Automatic
• Grade Standard: AR grade

Potentiometric Titrator is used for Acid / Base, Aqueous / Non aqueous and Redox Titrations. A fully Solid State Circuitry is incorporated, ensuring accurate reproducible results. The equipment is compact having a built-in magnetic stirrer with speed control and titration stand. The standard electrode system supplied with the equipment consists of Platinum, Glass & Calomel Electrodes. It can also be used with other metal electrodes such as Silver, Gold, Nickel, Tungsten etc. The choice of electrode system depends on the nature of titration. Attributes CompactCustomizedExpandableUpgradeableReliable and simple to operateInstrument works on 230 Volts A.C. 50 Hz. 100W Max. Other Products Digital Automatic Potentiometric Titration Apparatus facility to perform Karl Fischer Titrations, preciselyDigital Automatic Potentiometric Titration Apparatus (Universal Micro Controlled based Auto/Titrator)

Widely used in food additives, food safety, pharmaceutical production, petrochemical, quality control, research institutions. The compact designed integrated titrator and convenient automatic titration system a). Burette valve integrated design, easy to replace, to avoid different titration, mutual interference of different solutions b). Automatic identification pH standard solution group (standard solution group 1:4.00 pH, 6.86pH, 9.18pH; standard solution group 2:3.78 pH, 7.00pH, 10.01pH), supports manually identify c). Support setting the system time, Operator ID, Burette type, Burette factor, Stirrer speed, Manual temperature, and Correction potential zero value. d). Titration endpoint reminder 2. GLP compliant measurement information, can be traced back more complete information

This instrument, Model: VPT-MG is designed for Aqueous / Non-aqueous, Oxidation / Reduction and many other Potentiometric Titrations. A fully Solid State Circuitry is incorporated, ensuring accurate reproducible results. The equipment is compact having a built-in magnetic stirrer with speed control and titration stand. The indicator is a digital display with range - 900 to + 900 millivolts. Since, the millivolts can be read directly on the display, the operation is simple and quick. The standard electrode system supplied with the equipment consists of Platinum, Glass & Calomel Electrodes. It can also be used with other metal electrodes such as Silver, Gold, Nickel, Tungsten etc. The choice of electrode system depends on the nature of titration. The approach of the End-Point of the titration is shown by initial digital readings of increasing magnitude and the End-Point itself is indicated by a sudden large permanent reading. In cases where the changes in millivolts in the reaction are small, the End-Point can be asserted by drawing the graph of meter reading in millivolts vs volume added. The equipment can also be used for Oxidation/Reduction Titrations. A special set pointer control for zero adjustment and to extent the millivolts range is provided in the instrument. The apparatus works on 230 Volts 50 Hz mains supply and is stabilized to overcome voltage fluctuations in the range 220 to 250 volts. The instrument is supplied with manual of operating instructions and set of accessories suitable for Potentiometric and Oxidation/Reduction Titration.

Incorporated with maintenance free Dispenser.No Refilling is necessary after every titration.Several titrations can be carried out uninterruptedly.Average factor calculation facility.Results are Automatically Calculated in Percentage, PPM and mg of H2O.Inbuilt volume validation facility.Equipped with inbuilt volume validation facility.RS 232 Interface for PC to download the data.Three User Level based functionality: Admin, Manager and Operator.

Potentiometric Titrator Model Agile Can work as Stand alone or through PC Potentiometric Titrator for acid base, redox, Complexometric, Precipitation etc titrations Key features • Corrosion resistance fiber body • compact design • 7" TFT touch screen display • Cordless mouse can be used • Online graph on display • USB port for printer provided for direct printout without using PC • Pen drive connectivity • Automatic burette recognition, • Burette factor for calculation purpose, • Automatic calculation in desired units using Formulae Constants. • Document format report print out which can be directly filed, Time, Date, Titration • • number & Sample identification number facility • Alphanumeric entry possible for sample name, batch number, operator name etc. • Individual username & password for each user • Limiting system access to authorized individuals meets GLP Compliance. • Can be expanded applications like pH stat, COD, KF etc. with suitable accessories. • Software for CFR 21 part 11 compliance can be ordered.

With vast industrial experience, we offer high-grade Automatic Titrator. Procured from the well-known vendors, these Automatic Titrators are made by using advance technology. Further, Automatic Titrator is widely appreciated for its hassle free performance and other unique features. Besides, we are associated with the reputed logistic companies ensuring safe and prompt delivery. Highlights : Facilitate quick laboratory analysisRobust constructionEfficient performanceDurable

• Model Name/Number: MT-5
• Range (pH): 14.000 pH
• Usage/Application: Water Analysis: Alkalinity, Hardness, pH, Acidity, Conductivity, Ions
• Brand: MANTECH
• Resolution (mV): 0.01 mV

• Classification: Other

1. Large LCD touch screen. 2. Potential titration ,conductivity titration and constant titration can be achieved through different unit combination 3. Prestore with preselected endpoint titration, blank titration or manual titration function and other automatically generate specific titration mode can be programmable.

Instrument functions: 1. Touch screen, English operation interface for easy use.2. Its screen is 5.7 inch large and can show titration curve, first derivative and graphics. Also, it can edit and modify titration modes.3. It has modular design and is composed of volumetric (coulomb) titration device, controlling device, measuring device which can realize potential titration, conductivity titration and constant titration.4. Potential titrator is composed of volumetric titration module, controlling module and potential measuring module.5. Conductivity titrator is composed of volumetric titration module, controlling module and conductivity titration module.6. Constant titrator is composed of volumetric titration module, controlling module and constant measuring module.7. Coulomb Titrator is composed of coulomb titration module, controlling module and potential measuring module.8. It has pre-titration, preselected endpoint titration, blank titration and manual titration modes. The user can also create specific titration modes to meet different experiment requirements.9. The instrument can be connected with TP-16,TP-24 and TP-40 serial printers and print measuring data, titration curve and calculation results.10. The instrument is controlled by the computer. The real-time potential curve, first derivative, second derivative diagram can be shown on the screen. If matched with Rex specific titration software, it can conduct titration analysis, realize editing, modification of titration methods. It also functions as storage of titration curve and data, editing of titration calculation, dealing of database and statistics.11. Different sensors can be chose to conduct acid base titration, redox titration, precipitation titration, complexometry titration, non-aqueous titration and pH value measurement.12. The stirring system adopts PWM modulation technique and applies software to reduce the noise.13. The titrator adopts the specific material which is against perchloric acid corrosion and can conduct several titration reactions. Specifications: 1. Measuring Unit:a) Potential  (included?Measuring range: ±1999.0 mV?0.00?14.00 pHResolution: 0.1mV?0.01pHAccuracy: ±0.03%FS?±0.01pH±1 bitb) Constant (optional)  Measuring range: (0?199.9) μA?(0?19.99) μA?(0?1.999) μA?(0?0.199) μAPolarization voltage: 30mV?50mV?100mVAccuracy: Control titration sensitive?±5%FS?Polarized current inspection error?±2.5%FSc) Conductivity (optional?Measuring range: 0.000μS/cm ?199.9?S/cmResolution:0.001μS/cmAccuracy: ±1.0?FSd) TemperatureMeasuring range: -5.0?105.0 °CResolution:0.1°CAccuracy: ±0.3°C±1 bit2. Cylinder and valve system: (Volumetric titration unit could be replaced by coulometric titration unit)Titration analysis of repetitive: 0.2%Titration volumetric of accuracy: 10ml burette: ±0.025ml?20ml burette: ±0.035mlResolution of burette: 10ml burette: 1/10000?20ml burette: 2/10000Infusion or supplementary speed of burette: (50±10)s (when burette is full scale)3. Control devicea) Large, touch LCD screen (included): Easy to operateb) Computer software control (Computer is optional): Could make titration analysis on computer’s virtual titration operational interface and achieve remote control4. Stability: (±0.3mV±1 bit)/3h5. Calibration: Up to two6. Power: AC(220±22)V?(50±1)Hz7. Case outside serial No.: WXS-A004-38. Dimension (mm): 360×300×3009. Weight(kg):10