Powder Adhesive Dealers

POLYBOND is two-component cold water soluble Modified starch powder. It is used for Paper Corrugation and Pasting . The advantages of using POLYBOND are: * POLYBOND is available in Powder form. * It is cold water soluble. * Generally POLYBOND 1 : 3 to 4 parts of water is used and mixed well for paper corrugation and pasting. * No heating is required to prepare adhesive paste/glue. * Honey colour prepared paste with no settlement at bottom on storage of prepared glue. * Consistent quality and no batch-to-batch variation. * No black particles and impurities. * POLYBOND is NOT mixed with any cheap filler like clay etc. (This can be easily verified by preparing its paste. * POLYBOND paste will be Honey in colour and no settlement will be observed in the gum pot on storage while Starch powder mixed with any cheap filler will be dirty yellow colour and filler will set at the bottom on storage.)

A single component powder(apply with water), based on a iron powder filled adhesive system. The non-rusting, non magnetic dependable inert putty extensively used for fairing, repair, filling or patching of iron castings and equipment where solid irony finish is desired. Features of Iron Cement • Fast, cost effective and durable • High compressive strength and extreme chemical resistance • Good resistance to corrosion and abrasion • Efficient alternate method of repair where welding or brazing would be undesirable or impossible • Can Repair Intricate shape or formsthin sections, difficult to weld metals • No equipmentPower supply needed • Unlimited cycle of repairs • Less Labor costs - Avoid assemblydisassembly, Pre MachiningPost Machining • Resistant to chemicals and most acids, bases, solvents, and alkalis • Superior adhesion – forms a solid bond to steel, cast iron, • Eliminates costly wear part inventory • No shrinkage, expansion or distortion • Excellent electrical insulation characteristics • Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas • No VOC's • Routine Maintenance and Unexpected Maintenance • Repair cost at fraction of replacement cost. Where to Use? • For Reconditioning Parts • Repair for iron & steel Casting

Thermoplastic powders are used in the textile industry as adhesives Product examples include: laminating furniture leather or imitation leather to felt or foam sheet backings, shirt collars that are fixed and reinforced a with fine powder layer, technical textiles for clothing that benefit from the adhesive layer being discontinuous and breathable, geotextile laminates with non-woven layers, automotive fabrics for seating, door lining or noise insulation around the engine. Powders are used in many diverse markets, much of their usage is linked to non-woven fabric processing. For some users, even the non-woven fluff itself is bonded together with the powder working as a commingled binder. The methods used for applying the powders onto textile fabrics either woven on non-woven is scatter coating, powder dot or paste dot.

POLYBOND is two-component cold water soluble Modified starch powder. It is used for Paper Corrugation and Pasting . The advantages of using POLYBOND are: * POLYBOND is available in Powder form. * It is cold water soluble. * Generally POLYBOND 1 : 3 to 4 parts of water is used and mixed well for paper corrugation and pasting. * No heating is required to prepare adhesive paste/glue. * Honey colour prepared paste with no settlement at bottom on storage of prepared glue. * Consistent quality and no batch-to-batch variation. * No black particles and impurities. * POLYBOND is NOT mixed with any cheap filler like clay etc. (This can be easily verified by preparing its paste. * POLYBOND paste will be Honey in colour and no settlement will be observed in the gum pot on storage while Starch powder mixed with any cheap filler will be dirty yellow colour and filler will set at the bottom on storage.) * This product is significantly stable with excellent flow properties. * It has excellent tack at any concentration resulting in formation of fibre tear bond with minimum cure time. * Due to smooth flow of the paste, uniform glue spreading resulting in higher mileage and lower consumption of Glue. * Prepare adhesive gives good Compress Strength (CD) to the paper. * Excellent bonding coupled with shorter drying time enables end user to increase the speed of the M/c and hence higher production. * Ease of cleaning M/c parts resulting in lower idle time and labour cost.  

We are a trustworthy Supplier, serving the customers with superior quality Flock Powder Adhesive. Serving the markets of Delhi(India) and nearby area, we offer top-notch quality range.

• Brand Name: impele impex
• Application: ceramic wall tiles
• Type: ENGOBE WHITE POWDER
• Model Number: ii4
• engobe white powder: 12000

While climbing on the success ladder, it has become increasingly important for us to deliver high grade engobe white powder. Tested as per the industry guidelines and clients' requirements, this ceramic raw material is available in varied air-tight packaging materials. Widely used in ceramics and apart from this, it is also used as a light diffusing material in bulb & as a paint to modify gloss level. This engobe white powder is acclaimed across the nation for accurate composition, purity, solubility, eco-friendliness, high effectiveness and longer shelf life.

The advantages of using BONDEX are: * BONDEX is available in Powder form. * It is cold water soluble. * Generally BONDEX 1 : 1 to 2 parts of water is used and mixed well for paper corrugation and pasting. * No heating is required to prepare adhesive paste/glue. * Honey colour prepared paste with no settlement at bottom on storage of prepared glue. * Consistent quality and no batch-to-batch variation. * No black particles and impurities. * BONDEX is NOT mixed with any cheap filler like clay etc. (This can be easily verified by preparing its paste. * BONDEX paste will be Honey in colour and no settlement will be observed in the gum pot on storage while Starch powder mixed with any cheap filler will be dirty yellow colour and filler will set at the bottom on storage.) * This product is significantly stable with excellent flow properties. * It has excellent tack at any concentration resulting in formation of fibre tear bond with minimum cure time. * Due to smooth flow of the paste, uniform glue spreading resulting in higher mileage and lower consumption of Glue. * Prepare adhesive gives good Compress Strength (CD) to the paper. * Excellent bonding coupled with shorter drying time enables end user to increase the speed of the M/c and hence higher production. * Ease of cleaning M/c parts resulting in lower idle time and labour cost.

Synthetic Iron Oxides-red,Yellow, Black Etc , Oxide Colours, Water Proofing Compound Powder, Tile Adhesives, Joint Fillers.

powder adhesive, Packing Material, Corrugation Adhesive Powder, lamifix

powder adhesive, Packing Material, Corrugation Adhesive Powder, lamifix

powder adhesive, reno water tank, Fibrecon Ultratech Cement

• white: yellow

We are offering dextrin, white, yellow, corrugation gum powder etc.dextrn for the spira paper tube winding , core , edge protectors, composite can, fibre drum, corrugation 2in 1 gum , gum powder for corrugating, powder for pasting , automatic machine corrugating gum powder. Suitable for all gsm, bf paper.

powder adhesives, auto laminator gum, Corrugation Gum Powder, Dextrin

powder adhesives, Dextrin

powder adhesive, Resilient seated di Gate Valve, Rubber Disc Check Valve

Powder Coat Adhesive

powder adhesive, bopp self adhesive

powder adhesive, Packing Material, bopp self adhesive, gum tape

powder adhesive, Natural Bees Wax, PTFE Teflon Coating