Power Rectifier Dealers

Power rectifier there are no chance of spillages and leakage and there is minimal nontoxic smoke in case of fire. Use of Class ‘F’ ‘H’ insulation increases the heat bearing capacity and enables the use of the transformer in humid and chemically polluted atmosphere also.

• Brand Name: JINDAL'S

Jindal's brings you the finest products designed and engineered by the people who have been in the same field for the last 30 years. Rectifier is an economical and most efficient method of obtaining dc from ac supply. Jindal's manufactures a wide range of rectifiers covering 0-500 volts and up to 15000 amps. Capacity suitable for electroplating, anodizing, hydrogenation and many other electrochemical processes. The entire manufacturing process is under one roof ensuring 100% quality control at every stage of production. We believe in quality & customers satisfaction. Advantages : 1. Step-less on load voltage regulator 2. Designed for 100% continuous load 3. Nil waveform distortion 4. High efficiency of up to 97% 5. Virtually zero maintenance specifications : the standard model conforms to the following specifications: 1. Output voltage : from zero to max. Rated d.c. Voltage (upto 1000 volts). 2. Output current : from zero to max. Rated d.c. Current (upto 3000 amps) 3. Input voltage : 415v, 3-phase, 50 hz, a.c. 4. Cooling : natural oil cooled 5. Modes of operation : (a) manual control (b) electrical with the help of push buttons (c) mechanical with the help of t-handle 6. Ripple content: less than 5% • model with 1% ripple available as optional feature 7. Efficiency: 12 v rectifier: 82% 24 v rectifier: 90% 100 v rectifier:94% 200 v rectifier:96% 250 v and above:>97% note: non-standard models are also available against specific requirements. Optional features : 1. Constant voltage controller (cvc) 2. Constant current controller (ccc) 3. D.c. Overload trip system 4. Zero run down system 5. Programmable ramping arrangement 6. Signal isolators to enable automation plc compatibility.

• Frequency: 50 Hz
• Country of Origin: Made in India
• Brand Name: Textronik Industries
• Current: 750Amp
• Model Name/Number: 8504
• Material: Mild Steel

• Model Name/Number: R48-4000e Emerson Esure Rectifier Module
• Rectifier Type: Full Wave
• Usage/Application: TELECOM

• Condition: New
• Phase: Three Phase
• Voltage (V): 440
• Current (Amps): 1000
• Turns Ratio: ICT
• Operating Temperature: 0 to 70 Degree C
• Insertion Loss: 1.15 db

• Brand Name: Semikron
• Phase: Three Phase
• Current: 205 A
• Model Name/Number: SKD160/16
• Usage/Application: Power Supplies,Variable Frequency Drives,Battery Charger Rectifier
• Weight: 270 g
• Surge Peak Forward Current: 1800 A
• Forward Voltage: 1.65 V
• Mounting: Case G 37

Rectifier is a transformer that converts A.C. into D.C. Supply. It is used in Electroplating, Anodising, Hydrogenation and all other Electroplating Processes. These are tailor made, covering a wide range from 10 amps. To 15000 amps. We can provide different output DC voltage as per requirement.(Standard rating are 8, 12, 16, 24 volts)

• Phase: Single Phase
• Current (Amps): 200 Amp to 600 Amp
• Voltage (V): 440 V

• Country of Origin: India
• Type: Rectifiers
• Application: Electronics Use
• Frequency: 50 Hz
• Warranty: 5 Years Unconditional Guarantee
• Manufacturer: Jindals

We are offering power rectifiers. Rectifier is an equipment that converts ac into dc supply. Power make silicon rectifiers are widely used in electroplating, anodizing, hydrogenation and all other electrochemical processes. These are tailor made, covering a wide range from 200 amps to 15000 amps at different output dc voltage as per requirement.

Power rectifier for industrial applications critical to the functioning of several key industries like Oil & Gas, Cement, Steel, Thermal & Power, Railways, Chlorination, Automotive, Chemical, etc.

We are one of the major Suppliers of Silicon Power Rectifiers in the market. Silicon Power Rectifiers are especially designed for continuous rated current with adequate margin of safety. The Silicon Power Rectifiers made accessible by us are capable of working at 100% load factor. ADVANTAGES : Step-less On-Load Voltage RegulatorDesigned for 100% Continuous LoadNil Wave Form DistortionHigh Efficiency of up to 97%Virtually Zero maintenance SPECIFICATIONS : Output Voltage : From Zero to Maximum rated D.C. Voltage (upto 1000 Volts)Output Current : From Zero to Maximum rated D.C. Current (upto 15000 Amps)Input Voltage : 415 Volts, 3-Phase, 50 Hz, A.C. SupplyCooling : Natural Oil CooledModes of Operation : Manual ControlElectrical with the help of push ButtonsMechanical with the help of T-HandleRipple Content : Less than 5%Efficiency :12 V Rectifier - 82%24 V Rectifier - 90%100 V Rectifier - 94%200 V Rectifier - 96%250 V Rectifier - >97% Special Features of our Rectifier Equipments : Our Rectifier equipments are wound with electrolytic prime grade copper strip to minimize power losses. In comparison to Aluminium conductor used by many other manufacturers. Our equipments are designed liberally as per capacity and are ideally suitable for marginal over loading conditions.Annealed Copper bus bars/ Aluminium Bus Bars of electrolytic grade with conductivity greater than 99.99% as per IS : 613-1984 are used.DIODES : Silicon Diodes are tested in house. Similar PIV batch and same forward drop diodes are used in the equipment for equal load sharing and reducing the power losses of diodes. The diodes in the rectifiers are fitted with suitable heat sink and hole storage resistors and capacitors.IPT : Inter Phase Transformer-IPT is connected between two star points of the secondary of the main transformer. The IPT improves the commutation, there by increasing the rating of the Rectifier.Lamination Core : we use imported CRGO lamination core which has minimum power losses and results in better efficiency of equipment and savings in energy bill.Meter : we use reputed make – AE/RISHABH or as per customers requirement. Optional Features : Constant Voltage Controller (CVC)Application : The CVC will automatically maintain a constant output voltage as per setting, irrespective of input voltage variationAdvantage : By using CVC, uniform quality of plating can be maintained, thereby controlling excessive consumption of plating raw material at high voltage.Constant Current Controller (CCC)Application : The CCC will automatically maintain a constant output current as per setting, irrespective of inpt voltage variation.Advantage : By using CCC uniform quality of plating can be maintained, thereby controlling excessive consumption of plating raw material at high voltage.D.C. Overload Trip SystemApplication : The DC Overload Trip system will sense the signal from the output of the Rectifier and trip the main contactor in case of overshooting the set range.Advantage : By using the DC Overload Trip System, the diodes will be saved during any accidental short circuit in the bus bars or in the tank.Zero Run Down SystemApplication : with the help of Zero Run Down System, once the Rectifier trips or is switched off while working, it will automatically start from 0 volts when restarted.Advantage : This saves the diodes from sudden load current, thus increases the life of the equipment.Signal Isolators to enable automation / PLC compatibilityApplication : The signal Isolators can be used to avoid the milli-volt drop of the Ammeter / Voltmeter signals. The Isolators can give output in milli-Volts / milli-Amps.Advantage : Ideal for use when the Voltmeter/Ammeter panel is kept too far from the Rectifier. These signal Isolators are also necessary for the input signals to the PLC panel, i.e. to make the Rectifiers PLC-compatible.

• Brand Name: SEMIKRON
• Application: Electrical
• Condition: New
• Model No.: SKD145/16
• Current: 145 A
• Voltage: 1600 V
• Color: WHITE
• Minimum Order Quantity: 1

Power rectifier in a variety of packages starting from M6 stud in top hat range to 3" in capsule types. In addition to rectifier diodes,

• MODEL: DESCRIPTION
• SFC007100: 7V / 100A
• SFC 010070: 10V / 70A
• SFC 012100: 12V / 100A
• SFC 035125: 35V / 125A
• SFC 035150: 35V / 150A

 Features :-   Fully Solid State Circuitry.   Continuous Duty Operation   Overload / Short Circuit Protection with Indication.   Over Voltage Indication & Protection.   Under Voltage Indication.   Ripple 1% Maximum.   Digital Display for Output Voltage & Current.    OPTIONAL FACILITIES : (At Extra Cost) :-   Process Complete timer with Indication & Alarm.   Timer with Reset & do not Count Time during Mains Failure.   Ampere Hour Meter.      APPLICATIONS :-   Cathodic / Anodic Protection.   Electro Plating.   Water Treatment.   Electro Chlorination.  

• Type: Power Rectifier
• Application: Electric Furnace, Electronics Use, Industrial Use
• Condition: New, Used
• Input Voltage: 380V, 440V
• Frequency: 50 Hz, 60Hz
• Phase: Double Phase, Single Phase, Three Phase
• Warranty: 1year, 2years, 5years
• Certificate: CE Certified

• Type: Power Rectifier
• Application: Electric Furnace, Electronics Use, Industrial Use
• Condition: New, Used
• Input Voltage: 110V, 220V, 380V, 440V
• Frequency: 50 Hz, 60Hz
• Power: 1-2kw, 2-4kw, 4-6kw, 6-8kw, 8-10kw
• Phase: Double Phase, Single Phase, Three Phase
• Certificate: CE Certified, ISO 9001:2008

• Frequency: 50Hz
• Phase: Single Phase
• Features: Long working life , Low maintenance , Hassle free functionality.
• Current: 100 Amps
• Brand: Sunrise Power Controls
• Usage/Application: Industrial
• Material: Plastic
• Temperature: 45 Degree Celsius
• Weight: 200 g
• Size: 560 x 450 x 300 mm
• Power Source: Electric
• Voltage: 240V

• Brand Name: All Brand
• Min Order Quantity: 1 / Nos

Hydrogenation and many other Electrochemical processes. The entire manufacturing process is under one roof ensuring 100% quality control at  every stage of production. We believe in quality & customers satisfaction.

• Type: Rectifiers
• Material: Aluminum, Mild Steel, Silicon
• Application: Electric Furnace, Electronics Use, Industrial Use
• Condition: New, Used
• Input Voltage: 110V, 220V, 380V, 440V
• Frequency: 50 Hz, 60Hz
• Power: 1-2kw, 2-4kw, 4-6kw, 6-8kw, 8-10kw
• Phase: Double Phase, Single Phase, Three Phase
• Warranty: 1year, 2years

• Phase: Three Phase
• Frequency: 50 Hz
• Voltage: 380/440 volts
• Packaging Type: Box

• Type: Power Rectifier
• Application: Electric Furnace, Electronics Use, Industrial Use
• Condition: New, Used
• Input Voltage: 110V, 220V, 380V, 440V
• Phase: Double Phase, Single Phase, Three Phase
• Warranty: 1year, 2years

• Brand Name: Semikron
• Phase: Three Phase
• Frequency: 50 Hz
• Rectifier Type: Full Wave
• Voltage: 1800 V
• Packaging Type: Box
• Features: Target Applications,Glass passivated silicon chips,Low thermal impedance through use of direct copper bonded aluminum substrate (DCB) base plate

Electrically Isolated Metal Case, Upto 2800 Amperes Surge Capability, Terminals M6 X 12, Wide temperature range: - 40o C to 170C, High frequency Bridges (upto 100 KHz) on request.

• Brand Name: Semikron
• Phase: Three Phase
• Frequency: 50 Hz
• Rectifier Type: Full Wave
• Voltage: 1800 V
• Packaging Type: Box

High Power Oil Cooled Rectifier (12V / 1500A), Electronic Load Bank

Power Rectifiers, Servo Voltage Stabilizers, Three Phase Sine Wave Inverter

Silicon Power Rectifiers, Industrial Servo Voltage Stabilizers