Series 160 Stainless Steel Pitot Tube
Get Price Quote
series 160 stainless steel pitot tube ideal for use with our precision manometers and air velocity gauges, dwyer® pitot tubes are constructed from corrosion resistant stainless steel for a lifetime of service. Asme design meets amca and ashrae specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ashrae tip design yields a calibration factor of 1. Ashrae design needs no calibration! permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" dia. Or as large as 36 ft. Dia. A universal model fits user supplied 34" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations. product applications : monitor or control static or differential pressure when combined with differential pressure gage, switch or transmitter.
pitot tubes
Get Price Quote
Both ‘S’ Type & ‘L’ type pitot tubes are available with pitot constants. S type pitots are used for measurement of high temperature & dust laden gases. Whereas , L type are used for clean gases. Diffrential pressure manometers , both digital & analog are available with pitot tubes.
Best Deals from Precision Rods
Aluminium Extruded Finned Tubes
200 - 300 Per Meter
50 Piece (MOQ)
Extruded Finned Tubes
Get Price Quote
Extruded Finned Tube
5,000 Per Meter
10 Meter (MOQ)
Endo High Pressure Tube
3,000 Per Piece
5 Piece (MOQ)
Extruded Finned Tubes
Get Price Quote
We are the leading Manufacturer,Supplier and Exporters of wide range Extruded Finned Tubes,Chennai,India. This is manufactured by high quality raw material. this is available in different sizes and shapes. this is more durable and compatible in nature and also demanded in domestic market. Customers can easily avail this from the market at attractive prices.
Plunger Rods
Get Price Quote
Hand Pump Plunger Rod
100 - 350 Per Piece
100 Piece (MOQ)
High Pressure Tubing
500 Per piece
1 Piece (MOQ)
High Pressure tubing’s are made of soft and kink resistant PVC. These high-pressure lines have Male luer lock connector at one end and female luer lock connector at another end. It is Sterile and Individually packed. Advin manufacture High Pressure Tubing with international quality standards. We are leading exporter of High Pressure Tubing from India. Advanced Features High pressure extension line Soft PVC Tubing Kink Resistant Non-toxic Non-cryogenic Sterile and Individually packed 500 psi to 120 psi
plunger rod
Get Price Quote
3 Piece (MOQ)
Strong industrial base along with a wide area network, we deliver the range in the stipulated time span. Catering to the customers needs with excellence, we, as a Supplier engaged in offering a qualitative array of Plunger Rod & Connector.
Bio Metallic Extruded Finned Tubes
Get Price Quote
we being a customer centric firm are involved in manufacturing, supplying and exporting high quality bio metalic extruded finned tubes. Appreciated for superior quality, these copper finned tubes are manufactured from high grade bio metalic metal to offer higher efficiency in heat exchange processes. These bio metalic extruded finned tubes are built using latest technology to make it two times more advanced than lighter tube in offering efficient heat exchange. prominent features : longer functional life high tensile strength low power consumption corrosion resistant .
0.0
View Profile
High Pressure Nylon Tubes
17 Per Meter
0.0
View Profile
S Type Stainless Steel Pitot Tube (Series 160S)
Get Price Quote
0.0
View Profile
Averaging Pitot Tube
Get Price Quote
0.0
View Profile
plunger rod
Get Price Quote
0.0
View Profile
High Pressure Nylon Tube
250 Per Kilogram
0.0
View Profile
Plunger Rods
Get Price Quote
We are identified as a prominent Manufacturer and Supplier of Plunger Rods in Gurgaon, Haryana, India. We manufacture these rods with a high level of precision, at our state of the art manufacturing unit. We are competent to meet the market demands promptly and effectively. Our Plunger Rods are available in various sizes and grades, to meet all kinds of industrial requirements. Our clients can acquire these Plunger Rods from us at competitive rates.
0.0
View Profile
Averaging Pitot Tube
Get Price Quote
averaging pitot tube Averaging Pitot Tube is suitable for clean liquid, gas flow measurement • Accuracy ± 2 % of actual flow rate • Repeatability of measurement ± 0.2 % • Flow rate turndown typically 4:1 • Short upstream and downstream straight pipe lengths • Long term accuracy unaffected by wear • Less pressure loss
0.0
View Profile
extruded fin tubes
Get Price Quote
Extruded Fin Tubes are heat exchanger tubes mainly required to transfer heat from a flowing fluid and cooling it down by passing air on the fins of the tubes. In extruded fin tubes the surface area of heat transfer is increased because of the increased height of the fins thereby causing it to become more exposed to the flowing air. Moreover in this process the thickness of the fin is also very low causing the heat transfer to become more efficient. The extruded fin tubes are used mainly where the atmosphere is corrosive and the heat transfer required is higher. Extruded fin tubes are mainly manufactured by extruding fins from the base material itself. It is generally manufactured using bimetallic combinations where the base tube can be made of Carbon Steel, Alloy Steel, Stainless Steel, etc and the fin material is Aluminum or Copper etc. In the process of manufacturing Extruded Fin Tube, a Muff Tube (Outer) and a Base tube (Inner) are used. The base tube is inserted inside the muff tube. Then the fining is done by extruding the fins from the Muff Tube. During the process the muff tube forms a very strong bond with the Base tube ensuring almost no air gap or non contact area between the Muff Tube and the Base Tube. There is 100 % contact between the Base and the Muff Tube in Extruded Fin Tubes. This increases the surface area and gives the best heat transfer. In Extruded Fin Tubes, Aluminum Muff Tube covers the Base tube completely and hence gives excellent corrosion protection to the Base tube. This increases the life of the overall equipment and hence reduced downtime with greater efficiency. In Extruded Fin Tubes, the fins are made by Extrusion process and hence have higher strength and resistance to damage my mechanical handling. It s highly suitable for temperatures as high as 300 Deg C. In Extruded Fin Tube, the bonding between the fins and tube is the strongest in the process. During the manufacturing process no damage is done to the base tube and hence it increases the safety and quality of the final product to a great extent. These Extruded Fin Tubes are manufactured by us on State of the art fining machine and can be supplied in the most efficient way. Special processes have been defined to ensure proper safety after packing of tubes. The main application of these Extruded Fin Tubes is in Air Fin coolers especially in highly corrosive atmospheres and high temperature applications. We can provide you the best quality Extruded Finned Tubes. We wait for your valued enquiries
0.0
View Profile
Pitot Tube Demonstrator Trainer
Get Price Quote
1 Piece (MOQ)
Plunger Rods
30 Per Piece
1 Piece(s) (MOQ)
High Pressure Nylon Tube
Get Price Quote
0.0
View Profile
CNG High Pressure Tube
100 - 200 Per One
high pressure tube
Get Price Quote
HIGH PRESSURE TUBE
0.0
View Profile
plunger rod
Get Price Quote
100 Piece(s) (MOQ)
Available in material ck45 , 42crmo4 , ss-304 with machine finish, minimum quantity 100 pieces, we offer best competitive price with short term delivery schedule.
0.0
View Profile
pitot tubes
Get Price Quote
Pitot Tubes ] Constructed in Inox Steel AISI 316, equipped with thermocouple type K. Different lengths available..
0.0
View Profile
Plunger Rod & Connector
Get Price Quote
Strong industrial base along with a wide area network, we deliver the range in the stipulated time span. Catering to the customers needs with excellence, we, as a Supplier engaged in offering a qualitative array of Plunger Rod & Connector.
pitot tubes
700 - 3,500 Per Piece
4 Piece (MOQ)
0.0
View Profile
High Pressure Extension Tube
Get Price Quote
Today's Medical India Private Ltd is only Specialist for Orthopedic Implants, for Spine, Joints, Knee Replacement, Kyphoplasty, Vertebroplasty, Balloon Catheter & Epidural products development company. Kyphoplasty Balloon Catheter, Vertibroplasty Balloon Catheter, Orthopeadic Implants, Join Replacement, Knee Replacement, Spine Balloon, Spine Screw High Pressure Extension Tube
0.0
View Profile
Post Free Ad
