High Pressure Ball Valve
1,200 - 2,000 Per Piece
2 Piece (MOQ)
Pvc Pressure Relief Valve
325 Per Piece
50 Piece (MOQ)
PVC Pressure Relief Valve is device which allows water behind a CANAL LINING to flow inside the canal but does not allow canal water to leak in the sub grade. These valves thus protect the lining from damage by releasing excessive hydrostatic pressure behind concrete lining. Why PVC Pressure Relief Valves requires ?Canal lining is a thin structure. It is capable of resisting small differential heads but can not counter balance the hydrostatic pressure to which the lining may be subjected during sudden drawdown or when canal is emptied. Therefore necessity of providing Pressure Relief valves & under drainage arrangement arises.Our Valves are available as per IS:4558 Design.ADVANTAGES :• NOVEL DESIGN• VERY SENSATIVE & OPERATE AT LOWDIFFERENTIAL HEAD• NEGLIGIBLE BACK LEAKAGE• MODULE IS PROTECTED WITH SCREEN• LONG LIFE• LIGHT WEIGHT• EASY IN CLEANING AS IT IS DETACHABLE• AVAILABLE IN 50mm, 63mm, 90mm,110mm & 160mm size (FLANGE TYPE & ELBOW TYPE)
Best Deals from Pressure Valve
Hydraulic Pressure Control Valve
Get Price Quote
1 Piece (MOQ)
Pressure Relief Valve
Get Price Quote
1 Piece (MOQ)
Stainless Steel Pressure Relief Valve
22,850 Per Piece
1 Piece (MOQ)
Pressure Relief Valves
1,000 - 5,000 Per Piece
1 Piece (MOQ)
Glass Pressure Relief Valve
Get Price Quote
The Glass pressure relief valve is a simple valve used for controlling and limiting the level of pressure levied on the system or the vessel that can be built by a process, equipment or instrument failure, or the fire. In a Pressure Relief Valve, the pressurized gas is flown into the system to release the pressure. The glass pressure relief valve is outlined in such a way that it releases a prearranged set of pressure to keep the Glass vessels safe and also prevents other equipment from being harmed due to the intense pressure released exceeding the limit of their design. When the pressure exceeds its limits, the glass pressure relief valve opens up forcefully and releases a small portion of the gas or fluid that helps in maintaining the appropriate pressure in the system. The Safety Pressure Relief Valve is designed and made up of borosilicate glass and PTFE. The maximum suggested operating temperature of the system is 150°C as well as it works fine under a wide range of pressure. Working & Operation A simple connection is offered for the safety of the vent as well as after each operation; the valve tends to reset itself without any labor or the material cost of a split disk replacement. This freshly developed concept of glass pressure relief valve seat production caters to a pressure seal for the seat. The pressure on the seal will increase with the building up of the inlet pressure. The lip present can achieve this on the inner diameter of the seat that is pressing on the side of the plunger. The pressure of the seat never gets balanced with the weight load as it has in the traditional pressure relief valves as it is not dependent on the weight load for the pressure of the seal. The physical contact between the PTFE seat and the low Friction PTFE plunger allows an easy plunger eviction from the seat at the initial pre-set pressure. Due to a sharp increase in the seat pressure, the valve gets sealed and restricts the gases as well as liquids. The Glass Pressure Relief Valve is admirably suited to control different levels of pressure inside all types of reactors as well as the vessels where a relief valve Is needed to seal the system against both the gases as well as the liquids. It can withstand a maximum temperature of 300°F and can take a thermal shock up to 200°F. Pertinent Features High corrosion resistance qualities Manufactured with TFE construction and Borosilicate Glass High Heat resistance qualities Complete visibility Benefits of Glass pressure relief valves It is entirely corrosion-resistant. It is made up of TFE and Borosilicate Glass. It has high heat resistance qualities. It’s patented seal ensures a better seal functioning against all types of liquids and gases. It comes with clear transparency or visibility for you to inspect. It bears no replacement cost as the valve resets itself. It has no stuffing box to maintain. Final Thoughts The Ablaze Export PTFE pressure relief valves were manufactured to use on the systems that require the corrosion resistance ability possessed by PTFE. The operating principle remains constant as priorly used in the regular line of the Safety Pressure Relief Valves having corrosion resistance qualities made from the borosilicate glass. Ablaze Export glass pressure relief valves have the corrosion-resistant qualities against all liquids as well as gases other than the hydrofluoric acid and the hot concentrated caustics. The Ablaze Export Pvt. Ltd. assures a perfect seal against all our manufactured equipment, as well as liquids and gases.
Pilot Operated Pressure Relief Valve
2,300 - 2,390 Per Piece
1 Piece (MOQ)
Pilot Operated Pressure relief valve ( Pilot Operated Safety valve ) Design - Diaphragm Sensing / Piston Sensing Straight pattern Body / Angle Patten Body Pilot operated pressure relief valve Semi Nozzle / Full Nozzle Size - 1", 2",3", 4", 6", 8" 10", 12", 14", 16", 20" End Connection - Flange End, Screwed end, Working Temperature - 1 to 250 Deg.C Material - Carbon Steel , Stainless Steel, Special material Set pressure - 100 to 1000 mmwc, 100 to 1000 mbar, 1 to 2 Kg/cm2, 2 to 4 Kg/cm2, 50to 100 Kg/cm2 Media - Gas, Liquid
SV 101 Pressure Reducing Valve
16,850 - 68,500 Per piece
1 Piece (MOQ)
Features : Single Seated :closing with Inlet Pressure for Positive, Dead End, Shut-off Accuracy of Regulation: Comaparable to Instrument Control with Full Flow for Equivalent Pipe : Comaparable to Instrument Control with Full Flow for Equivalent Pipe New Type Piston with Teflon + Seal: for Tempareture Up to 500 Deg F. Give Continuous Wiping Action Keeping Liner Clean, Improving Operating Reliablity and Reducing Maintenance. Piston Rings Can Be Furnished for Temperature Over 500 Deg F. Fully Guided Main Valve:prevent Rubbing or Binding of Internal Parts Gradual Opening Ported Main Valve: in Sizes 2.1/2” and Larger for Improved Throttling Control Under Low Flow Conditions. Sensitive Stainless Steel Diaphragm : Responds Instantly to Any Flow Change and Eliminates Stuffing Boxis and Bellows Seals. Full Travel Less Than Its Own Thikness Stress to a Minimum. Renewable Interchangeble Parts: Machine to Close Tolerance: Complet Overhaul Without Machinig or Removing Valve Body from the Line.
Gas Pressure Regulator Inbuilt Safety Shut Off Valve
Get Price Quote
MEDENUS gas pressure regulator RS250 The MEDENUS gas pressure regulator type RS250 ensures a constant outlet pressure - regardless of the primary (inlet) pressure - when the gas usage varies and ensures a quick pressure regulation when the flow rate abruptly changes. The inbuilt safety shut off valve ensures a safe shut off if the pressure is too high or too low. The gas pressure regulator RS250 is suitable for gases in accordance with DVGW Code of Practice G260/262 and all other neutral and non-corrosive gases (others upon request).The RS250 is available with flange connections DN25 to DN100 and working pressure up to 8,0 bar. All gas pressure regulators are certified by DVGW and CE. All regulators of the RS-series are with options like safety membrane, vent valve, remote release of SSV, noise reduction and many more available. For any details please look into our documentation or get in contact with us.
Pressure Seal Gear Operated Buttweld Gate Valve
5,000 Per Piece
1 Piece (MOQ)
Lehry Pressure Reducing Control Valve
101,000 Per Piece
1 Piece (MOQ)
Bronze Pressure Reducing Valve Diaphragm Type
16,785 Per piece
20 piece (MOQ)
Spirax Pressure Reducing Valve
6,000 Per Piece
10 Piece (MOQ)
Steam Pressure Reducing Valve
500 Per Piece
1 Piece (MOQ)
High Pressure Ball Valve
200 - 300 Per Piece
1 Piece (MOQ)
SS 316 High Pressure Ball Valve
222 - 550 Per Piece
1 Piece (MOQ)
0.0
Website
ABV 2 MF High Pressure Ball Valve
Get Price Quote
Pressure Relief Valve
550 Per pieces
1 pieces (MOQ)
Pressure relief valves (safety relief valves) are designed to open at a preset pressure and discharge fluid until pressure drops to acceptable levels. ... When the force of the steam pressure acting on the valve exceeded the force of the weight acting through the lever arm the valve opened.
prv valve
Get Price Quote
PRV Valve Manufacturers Mumbai If you want the best possible options in PRV valves then our company Patel precision is exactly what you need. With help of our highly qualified, skilled and talented teams of professionals we bring you PRV valves that are not just durable but also approved for casting. The modern design and appearance of our PRV valves make them a popular choice among customers. As one of the most reputed PRV Valve Manufacturers of Mumbai,we can assure our esteemed clients or customers that our products are capable of handling low pressures and high-pressure situations. Our polished PRV valves are considered to be ideal for liquid control applications.
Bronze Screwed Pressure Reducing Valve
Get Price Quote
Pressure Reducing Valve Bronze Compac(Screwed) Zoloto Make Item Code: 1040A Bronze Compact Pressure Reducing Valve (screwed) ZOLOTO MAKE ART.NO. 1040A SPECIFICATIONS & FEATURES: Screwed female ends to IS:554/BS:21/ISO: Easy to install. No Diaphragm, Piston type Provided with high quality Nitrile rubber 'O' Rings. With a provision of installation of a pressure guage is provided. 1040A SPECIFICATIONS & FEATURES: Screwed female ends to IS:554/BS:21/ISO: Easy to install. No Diaphragm, Piston type Provided with high quality Nitrile rubber 'O' Rings. With a provision of installation of a pressure guage is provided. Materials & Construction Suitability
API526 Pressure Safety Valve
Get Price Quote
10 Piece (MOQ)
FLOWSERVE NOBLE ALLOY High Pressure Ball Valve
100,000 - 1,000,000 Per pcs
1 Piece (MOQ)
PRV 100 Pressure Reducing Valve
Get Price Quote
1 Piece (MOQ)
Self Actuated Pressure Control Valves without any need for external power or or supply. Body CS/SS/CI and internals in SS. Sizes : ‘A”,3/4″, &2″Screwed, 1″,11/2″,2″,3″,& 4″ Flanged with PTFE, Neoprene & Phosphor bronze.Features : Compact design Constant outlet pressure. Very high flow rates. Positive shut-off
Pressure Relief Safety Valve
10,000 - 150,000 Per piece
2 no (MOQ)
Pressure Relief Valve
12,000 Per Piece
1 Piece (MOQ)
High Pressure Drain Valve
3,200 Per Piece
High Pressure Valve
Get Price Quote
We manufacture High Pressure Valve for high pressure hyper compressors. Our manufactured High Pressure Valve works at pressures of 870 kg/cm. sq. High Pressure Valve manufactured using duplex stainless steels like 17-4-Ph, 15-4-Ph, Inconel and Alloy steels. We make High Pressure Valve available at the best prices in the market. Features : Dimensional accuracy Optimum quality Rust resistantÂ
Boiler Cast Iron Pilot Operated Pressure Reducing Valve
5,000 Per Piece
10 Piece (MOQ)
Pressure Relief Valve
Get Price Quote
10 Piece (MOQ)
Pressure relief valves are used to protect an equipment from overpressure leading to its failure and bursting. Pressure relief valves have a wide range of use and application in almost all segments of industry. IBR approved with high discharge Coefficient Capacity tested at FCRI laboratory. Available in ASME SEC – I and SEC VIII Safety valves with double blow down rings to accommodate close overpressure and blow down requirements for boiler applications.
Post Free Ad
