Pretreatment Plant Dealers

pre-fabricated, modular type sewage treatment plants on mbbr. Mbr and sbr process aeration technologies.  low sludge production, less foot-print, low operating power, clear sewage output quality, less o & m 

We offer fully automatic conveyorised spray type and (tank) dipping type Pretreatment Plant. The range of Pretreatment Plant is instilled with accurate positioning systems. Pretreatment Plant consists and equivalent of conventional 5 tank/7 tank/12 tank pre cleaning systems. Highlights : Competitive pricesLow maintenanceDurable and efficientEasy to operate

• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 220V
• Condition: New
• Automatic Grade: Semi Automatic
• Driven Type: Electric
• Material: Mild Steel

We are a dynamically developing company that has evolved itself as a prime manufacturer and exporter of superior range of multifarious products such as pickling tank for strip galvanizing plant, pretreatment plants, pickling tank, acid fume extraction system and zinc white fume extraction and anti-corrosive equipment made from various industrial thermoplastics. We have been constantly innovating and improvising on quality of products to confer to the industry norms and standards. In pretreatment plant having all surface treatment tanks with all kind of accessories. A. degreasing tank b. rinsing tank c. pickling tank d. flux tank e. quenching tank f. stripping tank available accessories on request : 1. level indicator 2. heater 3. liquid circulation 4. air agitation 5. protection plate 6. heater protection plate 7. spreader (specially designed for tube industries) 8. rib 9. jig resting arrangement on tank 10. suction duct with slot 11. connections 12. lid with automation technical specification : above all tanks are made out from polypropylene non sticky material corrosion free, long lasting, design on rita (roechling integreted german tank building assitant) software. Weld on german wegner welding machine according to dvs norms therefore leak proof and long lasting. Advantage of all tanks • enviro friendly • easy to move • corrosion free • long lasting • leak proof • corrosion free • maintenance free • cost saving. Corrotech expertise : 1. custom design according size & weight. 2. fold bending 3. butt fusion welding technology 4. design on tank design software rita 2.5 benefit to users: 1. less pickling time. 2. less pickling tank increased productivity. 3. low production cost & rejection. 4. better pickling quality. 5. correction resistant. 6. low production cost & rejection.

We are a quality-conscious firm and make sure that our offerings are prepared using the world-class raw material and work methods. Also, the material is sourced from the trusted places only. We follow a stringent quality procedure to ensure that only a qualitative range of products should be delivered at buyer's end.

catering to industrial requirements and applications, we also manufacture and set up various pre-treatment plants to meet clients specific requirements, like:    1)  7 - 9 tanks dip/spray zn phosphating plant.    2)  single stage industrial spray cleaning cum drying machine.   3)  indexing type spray cleaning machine.totally free of hazardous chlorinated solvents, c.f.c. Or flammable chemicals, pre-treatment process performs both mechanical (spray) and chemical cleaning actions. material handling is easy using overhead conveyors and it requires minimal effluent treatment with iron phosphate. Pre-treatment plants are ideal for medium to high volume cleaning operations and require minimum operator labour input. we offer choices of dipping or spraying application, iron or zinc phosphating solutions, separated cleaning and phosphating zones or combined chemical zones.

We are offering pretreatment plant. Energy consumption - as mentioned above, sulfuric acid must be kept at elevated temperature while hydrochloric is used at ambient temperature. ( hydrochloric must be 70f or above to pickle at an acceptable rate so that some heating may be required in the winter months ) operator skill - because of its nature, sulfuric acid, even when used with an inhibitor, will work its way under the surface rust or scale and attack the base metal of the article being pickled. On the other hand, hydrochloric with the proper inhibitor will remove rust or scale and not attack the base metal. This means that an article may be left in hydrochloric acid solution for extended times without damage and therefore is easier for an operator to use.

We make sure that there will be no damage to the products that we deliver to the customers. For this, we use high quality packaging material and hi-tech machines ensuring the same. Ours is a well-established organization that is located in Coimbatore(India) and involved in catering to the customers based within and outside the boundaries. Our Powder Coating Pre-Treatment Plant is suitable for aluminium profile, metal, plastic, wood etc.

• Application: Water Recycling
• Voltage: 110V, 220V, 380V, 440V
• Condition: New
• Automatic Grade: Automatic
• Power: 10-15kw, 15-20kw, 20-25kw, 5-10kw
• Driven Type: Electric
• Warranty: 5years

We are counted among the trusted Pre Treatment Plant Manufacturer and Supplier. Our Pre Treatment Plant is demanded in diverse industries for executing Powder Coating and Painting Processes. Our Pre Treatment Plant is manufactured using world-class materials and components. The Pre Treatment Plants, which we offer, are easy to handle and simple to work with. Details Batch (Hoist Type)/Automatic (Overhead Conveyor/Transporter Type) Complete with Heating Systems and all other accessories Both Type Deep and Spray Type The Seven Stages Are As Follows Water Rinse Derusting Water Rinse Phosphating Water Rinse Passivation What is Pre Treatment Process? Pretreatment process is one of the most important and essential parts of the Powder Coating or Painting process. As all the materials, which have to be Powder Coated / Painted has to be totally cleaned and free from dust, oil, rust, scale and any other impurity on the surface. The materials, which need to be Painted/Powder Coated must be cleaned properly, and should be free from oil, rust, scale, dust and any other type of impurity, if any. This entire process is referred by the name of Pretreatment Process. The process consists of up to eight tank system; materials that need to be passed through diverse industrial chemical process and the result should be a crystal clean surface of metal with a protective coat. The Seven Stages Are As Follows Degreaseing : For removing of oil, dust and any greasy substances. The chemical is basically alkaline and made as 15% Strength in water. The chemical is heated up-to 60 degree. The jobs are then dipped in solution for 5 min and due to Chemical reaction all the dust, oil and greasy substance is removed. Water Rinse : For cleaning and removing the excess detergent. The plain water is in the tank and when the components are dipped, excess detergent is removed and the Components are washed. Derusting : For removing the rust and scale on components. The chemical is basically acidic and a solution of 15% in water is made. The components are dipped for 5-7 min depending on the amount of rust. The components then become virgin and ready for next process. Water Rinse : The excess chemical is washed in the water Phosphating : For giving a adhesive coat on metal. The solution is made of 10% in water. The components are kept in the solution for 5-10 min depending on the Coating required on the jobs. The solution is generally heated up-to 60-70 degree. Water Rinse : For removing excess solution Passivation : For giving a protective coat on the phosphated job. The solution is made of 5% strength. The chemical is heated up-to 60 degree C. The jobs are then dipped in solution for approx 2-3 min and a protective coat comes on the job. After the above process the metal is ready for Painting or Powder Coating. For Aluminium & Brass Components The pretreatment process is different for the Aluminium and Brass components, when compared to the process of the MS The cleaning process for Aluminum and Brass Components includes the following steps Degreasing : To clen the extra oil and grease on the components Water Rinse : To wash out and remove the excess degrees material from the Components Passivation : To make the surface active for the acceptance of Powder A short cut procedure for the cleaning of MS components is as follows Degrease Water Rinse Dip in Three in One solution for phosphating and passivation. Then the components are taken, dried and Powder Coated / Painted for casting or making forged components. Generally, they are shot/sand blasted and then powder coated/ painted. However, these components are to be coated within one hour of being shot/sand blasted, as they are prone to catch the moisture from atmosphere and turn yellow.

SPRAY PRETREATMENT PLANTS Spray Pretreatment Plants In the Spray Pretreatment process, there is a sequential arrangement of spray zones in a tunnel according to the designed chemical process. The Tunnel is mounted on tanks of the chemicals from where the chemicals are pumped up to the spray zones and sprayed onto the articles through nozzles. Each process zone is followed by a drain zone to avoid carryover of the sprayed chemical in the next process zone. The sprayed chemical is recollected into the tanks through the funnels provided in each zone of the tunnel.

we are offering Pretreatment Plants. We design and build different types of Spray & Dip Pre-treatment plants for Metals and Plastic parts depending upon the type of Conversion coating to be applied on work piece, which include: ZincIron Phosphate pre-treatment plant for steel parts Nano technology plant for multi-metal Chrome conversion coating for aluminium parts Manganese conversion coating for ferrous metal Pre-treatment plants for plastic parts

Sand/short Blasting is normally provided for casting and forging industries. It helps in reducing the water pollution considerably

We are Manufacturer, Supplier and Exporter of our product range and our setup is situated in Pune, Maharashtra, India. Dip Pretreatment Plants The articles are loaded in a basket / jig. The basket/jig is lifted & dipped in various tanks as per required chemical process. The lifting & dipping of basket can be done with the help of hoist ( manually ) or Transporter system ( Manually / Semi automatic / Automatic. )

• Country of Origin: Made in India
• Material: Mild Steel
• Voltage: 220 V
• Frequency: 60 Hz
• Phase Type: Single
• Automation Grade: Automatic
• Usage/Application: Industrial

• Type: Effluent Treatment Plant
• Application: Water Recycling
• Certification: CE Certified
• Weight: 100-1000kg
• Color: Available in Many Colors
• Voltage: 220V
• Automatic Grade: Automatic

We are engaged in the manufacturing & supplying of Pre Treatment Plants. The Pre Treatment Plants are in great demand at various industries for Powder Coating or Painting process. All the materials, which have to be Powder Coated / Painted, have to be totally cleaned and free from dust, oil, rust, scale and any other impurity on the surface. The process, which is adopted for the above, is known as Pretreatment Process. The process comprises of the seven or eight tank system, the material is to go through different chemical process, and the result is the much-cleaned surface of the metal with protective coat. Details Batch (Hoist Type)/Automatic (Overhead Conveyor/Transporter Type) Complete with Heating Systems and all other accessories Both Type Deep and Spray Type The Seven Stages Are As Follows <liDegreaseing Water Rinse Derusting Water Rinse Phosphating Water Rinse Passivation What is Pre Treatment Process? Pretreatment process is one of the most important and essential part of the Powder Coating or Painting process. As all the materials which has to be Powder Coated / Painted has to be totally cleaned and free from dust, oil, rust, scale and any other impurity on the surface. The process which is adopted for the above is known as Pretreatment Process. The process comprises of the seven or eight tank system and the material is to go through different chemical process and the end result is the totally cleaned surface of the metal with protective coat. The seven stages are as follows : Degreaseing : For removing of oil, dust and any greasy substances. The chemical is basically alkaline and made as 15% Strength in water. The chemical is heated up-to 60 degree. The jobs are then dipped in solution for 5 min and due to Chemical reaction all the dust, oil and greasy substance is removed. Water Rinse : For cleaning and removing the excess detergent. The plain water is in the tank and when the components are dipped, excess detergent is removed and the Components are washed. Derusting : For removing the rust and scale on components. The chemical is basically acidic and a solution of 15% in water is made. The components are dipped for 5-7 min depending on the amount of rust. The components then become virgin and ready for next process. Water Rinse : The excess chemical is washed in the water Phosphating : For giving a adhesive coat on metal. The solution is made of 10% in water. The components are kept in the solution for 5-10 min depending on the Coating required on the jobs. The solution is generally heated up-to 60-70 degree. Water Rinse : For removing excess solution Passivation : For giving a protective coat on the phosphated job. The solution is made of 5% strength. The chemical is heated up-to 60 degree C. The jobs are then dipped in solution for approx 2-3 min and a protective coat comes on the job. After the above process the metal is ready for Painting or Powder Coating. For Aluminium & Brass Components The pretreatment process of the Aluminium and Brass components are different from the MS In above components cleaning procee is is of three stages as follows : Degreasing : To clen the extra oil and grease on the components Water Rinse : To wash out and remove the excess degrees material from the Components Passivation : To make the surface active for the acceptance of Powder However a short cut for the cleaning of MS components are as follows : Degrease Water Rinse Dip in Three in One solution for phosphating and passivation. Then the components are taken , dried and Powder Coated. / Painted For casted or forged components generally they are shot/sand blasted and then powder coated/ painted. However these components are to be coated within one hour of being shot/sand blasting as they are prone to catch the moisture from atmosphere and turn yellow.

• Country of Origin: Made in India
• Brand: Shri Vishnu Engineering
• Power Source: Electric
• Number Of Tanks: 9 Tanks
• Frequency: 50 Hz
• Phase: Three Phase
• Automation Grade: Semi Automatic

  Sigmalink offers customized Pre-treatment process with perfect corrosion protection tailored to your pre-treatment requirements (for materials such as steel, aluminium or plastics). We design and build various types of pre-treatment plants depending upon the work piece size, shape, production method, material conveying systems and conversion coatings based on the individual clients’ requirement.   Different Types of Plants   We design and build different types of Spray & Dip Pre-treatment plants for Metals and Plastic parts depending upon the type of Conversion coating to be applied on work piece, which include: Zinc/Iron Phosphate pre-treatment plant for steel parts Nano technology plant for multi-metal Chrome conversion coating for aluminium parts Manganese conversion coating for ferrous metal Pre-treatment plants for plastic parts