Process Calibrator Dealers

• Usage: Industrial
• Specialities: High Performance
• Type: Pressure Calibrator

Intrinsically safe multifunction process calibrator Meets I.S. Class I, Division 1 Groups B-D, 171°C compliance standards Measures volts DC, mA, RTDs, thermocouples, frequency, and ohms Sources or simulates volts DC, mA, RTDs, thermocouples, frequency and ohms

FEATURES:4-20mA (1KΩ load, 24V Loop Supply)0-100.00mV, 0-1.000V, 0-12.000VK, J, E, T Thermocouple (° C and ° F)Frequency 1-62500 Hz0.025% Basic AccuracyEasy Keypad OperationEasy Step and Auto Ramp Functions0-20mA, 0-24mA selectable0-100% Input (mA, mV, V)Beeper warning when output is open (mA) or short (mV, V)

We are offering universal multifunction process calibrator. Universal multifunction calibrators are used for the simultaneaous simulation and measuring of programmable test points. thermometers, signals for thermocouple, rtd's, resistance, ma, mv, voltage, frequency is available in this multifunction calibrator.

We manufacture and supply Multifunction Process Calibrators. These handheld devices are battery operated and ideally designed for measurement of electrical and physical parameters. It is an all-in-one instrument that can serve as multimeter, thermocouple, and can also be used to measure volts, current, pressure, frequency, etc. It features a wide display screen that clearly shows all the readings. Rugged and compact body makes it perfect for demanding conditions.

  Measure to 40V, 400mA, 40kΩ Output voltage up to 10V Output current to 20mA Output resistance to 40kΩ Accuracy 0.03% of range Thermocouple measure & simulate RTD measure & simulate: PT100

• Specialities: Internal pressure module.

The Beamex MC4 is a documenting process calibrator. Instrument data can be sent from a computer to the MC4 and calibration results can be uploaded from the MC4 to a computer containing the Beamex CMX calibration software. Being a multifunctional calibrator, the MC4 is suitable for calibrating various process parameters, such as pressure, temperature and electrical signals.

Compact, Light Weight Unit with Holster • Capability to Measure & Simulate DC Voltages, DC Current, Frequency, Resistance, Thermocouples & RTDs • 5 digits display of Measurement & 6 digits display for Simulation • Dual LCD with white LED for backlight • Measurement & Simulation of : DC Voltages : 50 mV & 500 mV & 5 V in Measurement Mode 100 mV, 1V & 10V in Simulation Mode DC Current : 50 mA in Measurement Mode; 20 mA in Simulation Mode Resistance : 500 Ω & 5 KΩ in Measurement Mode; 400 Ω, 4 KΩ & 40 KΩ in Simulation Mode Thermocouples : R, S, B, E, K, J, T & N

• Common mode rejection : >120 dB at AC operation
• Normal mode rejection : >60 dB at 50 or 60 Hz
• Temperature Stability : ± 0.01% peroC
• Storage temperature range : -10 to 60oC
• Input-Output isolation : 500 V AC/DC
• Measurement sampling time : 250 ms
• Display : LCD, 16 x 2 display with backlit
• Accuracy : ± 0.05% overall for all parameters
• Linearity : 0.05%
• Response Time : <100 msec
• Functionality : Auto / Manual mode, Stepwise increment / decrement, min-max step for calibration
• Power Supply : External AC Supply ( universal 90 to 270 V AC )
•   : OR Internal rechargeable Ni-cd Battery ( 12 V, 1.2 Ah ) with charger
•   : ( Operational time with Battery 6 hrs. & recharging time 12 hrs. upto 90% )
• Load : 600 Ohm for 0 to 24 mA, 4.7 Kohm & above for 0 to 10 V DC
• Transmitter Supply : 24 V DC, 30 mA
• Case : Injection molded ABS with internal metal RFI coating
• Dimension : 290 (L) x 200 (W) x 110 (H) in mm ( DIN std. )
• Weight : Net 4 kg & with charger 4.5 kg
• Mounting : Table top Mounting
• Accessories : Resin carrying case, Banana Cables, Mains Chord
• Operating Conditions : Temperature 0 to 55oC / Humidity 5 to 95% non condensing

• Certification: CE Certified
• Condition: New
• Display Type: Analogue
• Driven Type: Battery
• Feature: Durable
• Product Code: APC 1000
• Particulars: UNIVERSAL CALIBRATORS

• Brand Name: Fluke
• Display Type: Digital
• Minimum Order Quantity: 1 Unit
• Model: 725

By making use of streamlined packing system, we become capable of meeting the bulk and customized packing requirements of the clients. Moreover, we ensure complete safety of the orders. In order to ensure complete satisfaction of the customers, we deliver the orders on the scheduled time.

• Brand Name: Fluke
• Material: Stainless Steel
• Driven Type: Mechanical
• Color: yellow
• Condition: New
• Power: 3-6kw
• Pressure: Low Pressure, Medium Pressure, High Pressure
• Operating Type: Automatic
• Usage: Laboratory, Industrial
• Certification: CE Certified
• Voltage: 110V
• Display Type: Digital
• Width: 50mm
• Packaging Type: Wooden Box
• Overall Length: 35mm
• Size (mm): 200mm
• Working Capacity: 10-50kg/h
• Specialities: Rust Proof, Long Life, High Performance, Easy To Operate
• Dimension (LxWxH): 375x290x275mm
• Type: Temperature Calibrator
• Weight: 1 Kg
• Frequency: 60
• Phase: Three Phase
• Warranty: 2 Years
• Accuracy: 99
• Country of Origin: India
• Humidity: 32
• Surface finished: Powder Coated
• Corrosion Resistance: Yes
• Machine Structure: Vertical
• Reverse Rotation: Yes

• Display Type: Digital
• Model Number: 223A
• Brand Name: Additel
• Weight: 1.6 lb (0.7 kg)
• Size: 100 X 192 X 52mm
• Power Supply: Polymer Li-ion rechargeable battery,or 10V DC adaptor
• Warranty: 3 years
• Operating Temperature: -10 to 50 Degree Celsius
• Storage Temperature: -20 to 60 Degree Celsius
• Battery: Rechargeable Li-ion battery (included)
• Humidity: Less than 90%, non-condensing
• European Compliance: CE Mark
• Electrical Connection: Diameter 4mm sockets and flat mini-jack thermocouple socket
• RS232 Interface: Standard RS232-DB9 socket
• Battery Life: 15 hours uninterrupted use Battery life will be reduced when 24V is applied
• Battery Charge: 110V/220V external power adapter (included)
• Display Size: 3.5 inch TFT color screen

• Brand Name: Extech
• Model No.: 412400

412400 multifunction process calibrator sources and measures thermocouples (j, k, and t), ma, mv, and v devices. The 24v loop supply drives current loads up to 1000 ohms. Memory for 5 user settable output values of each type for fast calibrations. Single/continuous step function for voltage and current. Comes complete with six aa batteries and calibration cable with spade lug terminals.     features:   source 0 to 24ma with 0.01ma resolutionmeasure 0 to 50ma (0.1ma resolution)select type k, j, or t thermocouple for precision calibrations in c or mvoutput 0 to 1999mv or 0 to 10.00vmeasure 0 to 19.99vsingle/continuous step function for voltage and currentself-contained 24v loop power supply drives current loads up to 1000ohm5 stored calibration values of each type for fast calibrationscomplete with six aa batteries and calibration cable with spade lug terminals

• White LED backlight: Yes
• Range: 20mA
• Model Name/Number: IT52.54
• Measuring Functions: DC Voltage - Range +4V, 40V, 400V
• T/c &amp; RTD: Yes
•  :  

• Weight: 600g (including battery
• Warranty: 1 year
• Operating Temperature: -10 ºC to 55 ºC
• Storage Temperature: -40 ºC to 60 ºC
• Temperature Coefficient: 0.005 x range per
• Electrical Safety: Designed in accordance with IEC/EN61010-1
• Over voltage category: IEC 1010-1 CAT I, 30V
• Maximum voltage: 1000V
• Size: 195 x 92 x 55 mm
• Features: Generation of output Volt signal up to 10V DC,Volt measurement up to 10V DC,Generation of output current signal up to 24mA DC,Current measurement up to 24mA DC

• Material: Metal
• Display Type: Digital
• Digit Display: 4 Digit
• Weight: 0.6 Kg (Without Batteries and Accessories)
• Accuracy: +-0.02% of rdg +-0.02% of f.s. +-2 dgts
• Size: 75(W) x 150(H) x 50(D) mm
• Model Name/Number: 38503

4 - 20mA (1KΩ Load, 24V Loop Supply) with1mA Resolution 0 -100.00mV, 0-1.0000V, 0-12.000V K, J, E & T Thermocouples (°C and °F) Frequency : 1-62500 Hz DC Current Basic Accuracy : 0.025% Easy Key Pad Number Operation Easy Step and Auto Ramp Functions 0-20mA & 0-24mA Selectable 0-100% Output (mA, mV, V) Beeper Warning when Output is Open (mA) or Short (mV,V )

The company is well-known for the provision of high quality Process Calibrators. The range of Process Calibrators made available by us is manufactured using high quality materials and is hence, low on maintenance. We offer Process Calibrators at the best prices in the market. Our range of Process Calibrators is appreciated for its excellent finishing, easy maintenance and longer life. Features : Improved display resolution for current : The generation/measurement resolution has improved to 0.001 mA 24 V (20 mA)/Loop check function : Enables measurement of generated current signals while supplying loop power to two-wire transmitter. Load current: Max. DC22 A 20 mA SINK Function : Absorbs the voltage supplied from an external power supply to its H terminal and simulates a two-wire transmitter making it ideal for loop checks 4-20 mA and 1-5 V DC Step-up/down Function : The output level can be changed between 4-8-12-16-20 mA signals by one touch for the 4-20 mA DC output, and between 1-2-3-4-5V signals for the 1-5 V DC output, for efficient calibration work Sweep Function : Increases and decreases the output level to the preset level at a constant rate for the selected sweep time (16 or 32 seconds). The sweep function and sweep time are set by the internal dip switches Source and Measuring of Voltage and Current : Generates and measures voltages up to 30 V DC and currents up to 24 mA DC Options : CA11E-2 Includes rubber boot, strap and accessory case

Multifunction Process calibrator source and measure Temperature functions , Thermocouples and RTDs Frequency, ohms, mV, Voltage, current , loop power Available models 11,14,15 Series Adopt ITS 90 Temperature Scale Used 6 digit LCD display with backlight Good accuracy 0.02 %, Battery Power operated RTC for Thermocouple Calibration 4 X1.5 VDC Alkaline Battery for long life

• Weight:  1.2 kg (2.7 lb)
• Operating Temperature:  -10 °C to +50 °C
• Storage Temperature: -20 °C to +60 °C
• Dust/water resistance: Meets IP52, IEC 529
• Size: 136 x 245 x 63 mm (5.4“ x 9.6 x 2.5)
• Batteries: Internal Battery Pack Li-ion: 7.2V, 4400mAh, 30 Wh
• Data storage capacity: 1 week of calibration procedures results

The 754 combines HART communication capability in a documenting process calibrator to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART instrumentation.   The 754 offers: • Integrated HART communication functions,permitting you to monitor, control, and calibrate HART instrumentation.• Handling of fast pulsed RTD transmitters and PLCs,with pulses as short as 1 mS.• Li-ion battery with 4400 mA hour life and gas gauge.

FEATURES High Accuracy of 0.02% for source 6 digits display for source A dual Liquid Crystal Display White LED for backlight Temperature Coefficient: 0.1 times the applicable accuracy,specification per degree C for 5 to 18 and 28 to 50 The range of the internal temperature compensation sensor is from 0 to 40, Compensation error ≤±0.5 The accuracy of the temperature probe: ±0.2 The range of the measured temperature is form -20-100 Maximum voltage between any output terminal and earth: 30Vp-p Maximum output current: Approximately 25mA APPLICATIONS All technicians responsible for installing, commissioning, calibrating and maintaining process industry transmitters, RTD, thermocouple including Instrument and Electric Shop Technicians, Instrument and Control Shop Technicians, Maintenance Technicians.  

• Model: EQ-333

4~20mA (1KV Load, 24V Loop Supply)with 1 A Resolution•  0-100.00mV, 0-1.0000V, 0-12.000V•  K,J,E & T Thermocouples ( ºC and ºF)•  Frequency: 1-62500 Hz•  DC Current Basic Accuracy: 0.025%•  Easy Key Pad Number Operation•  Easy Step and Auto Ramp Functions•  0-20mA & 0-24mA Selectable•  0-100% Output (mA, mV, V)•  Beeper Warning when output is open(mA)or Short(mV, V)

Fluke 754 Documenting Process Calibrator-HART You’re going to love what we’ve done with your calibrator. The 754 is everything you needed and wished for in the 744 and more! HART communication capability is combined to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation. The 754 does the work of several tools - sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. You’ll fall in love with the new improved graphical screen, Li-on battery for longer life, USB port and new accessories to complete the package.  For documentation, the 754 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations. Supports popular instrumentation management software. The 753 and 754, 743 and 744 work with the Fluke DPC/TRACK2™ software, and with popular programs from Honeywell Meridium, Emerson, Cornerstone, Yokogawa, Prime Technologies, Intergraph and others. It allows you to create procedures, instructions, and action lists to deliver fast, easy documentation. The Fluke 754 Documenting Process Calibrator-HART: Work smarter. Work faster.   The 753 and 754, 743 and 744 work with the Fluke software, and with popular programs from Honeywell Meridium, Emerson, Cornerstone, Yokogawa, Prime Technologies, Intergraph and others. It allows you to create procedures, instructions, and action lists to deliver fast, easy documentation. FEATURES   Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments   Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters   Power transmitters during test using loop supply with simultaneous mA measurement   Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules   Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results   Holds up to a full week of downloaded procedures and calibration results.   Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.   Easy to use   Three year warranty   Bright white dual display. Read both sourced and measured parameters simultaneously.   Multi lingual interface   Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.   Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.   Delivered with DPC/Track Sample software.   Compatible with many Asset Management software packages. HART Capabilities The 754 is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers the communication capabilities of the 375 HART communicator.   Requires no external box or second tool for everyday HART calibration and maintenance.   Offers fast HART communication.   Supports popular models of HART transmitters, with more devise-specific command support than any other HART field calibrator.   Works with multiple masters, burst mode, and multi-drop configurations.   Is easy to update as additional instruments are added and new HART versions are released.   Interrogate to determine device type, manufacturer, model, tag.   Reconfigure the sensor mapping of dual sensor temperature transmitters.   Read HART PV function and smart transmitter digital output while measuring analog mA output.   Read and write HART configuration functions to make field adjustments to PV range points, damping, and other top-level configuration settings.   Re-label smart transmitters by reading and writing to the HART tag field.

19 FUNCTIONS 59 RANGESKM-CAL-905MULTIFUNCTION PROCESS CALIBRATOR ACCESSORIES :Test leads, Fuse, User’s Manual, Carrying Case. OPTIONAL ACCESSORIES :Pressure modules SKU: KMCAL905Category: CalibratorsTags: calibration instruments, instrument calibrator, km cal 905,Kusam meco calibrators, MULTIFUNCTION PROCESS CALIBRATOR

• Digit Display: 4 Digit
• Display Type: Digital

The Beamex MC4 is a documenting process calibrator. Instrument data can be sent from a computer to the MC4 and calibration results can be uploaded from the MC4 to a computer containing the Beamex CMX calibration software. Being a multifunctional calibrator, the MC4 is suitable for calibrating various process parameters, such as pressure, temperature and electrical signals. High accuracy is one of the important features of the MC4. A standard feature of the MC4 includes an accredited calibration certificate as proof of its accuracy. The correction coefficients of a PRT probe can be programmed into the MC4 to further improve temperature accuracy. The large graphical display, menu based multilingual user interface and full numerical keyboard Features Pressure Section Internal pressure module Connection for interchangeable external pressure modules Electrical Section Current measurement (with internal and external supply) Voltage measurement Frequency measurement Pulse counting Current generation (with internal and external supply) Voltage generation Frequency generation Pulse generation Switch sensing Internal HART® compatible 24 VDC loop supply mV measurement simulation Resistance measurement simulation RTD measurement simulation

Universal Multifunction Calibrators are used for the simultaneaous simulation and measuring of programmable test points. Thermometers, Signals for thermocouple, RTD's, Resistance, mA, mV, Voltage, Frequency is available in this Multifunction Calibrator.

• Brand Name: VAISESKIKA

We are offering vaiseshika multifunction process calibrators. Description universal multifunction calibrators are used for the simultaneaous simulation and measuring of programmable test points. Thermometers, signals for thermocouple, rtd's, resistance, ma, mv, voltage, frequency is available in this multifunction calibrator. Features background lit, graphic lcd display and scaling function digital, menu driven value adjustment 22 keys and navigator switchable menu languages step-, ramp-, cycle-, hold-, hart--protocol, filter editable display units, real time clock, high speed call (%fs) average value, nin max, offset, value set stotage of 10 configuration files transmitter supply 24 vdc 22ma