Progressive Cavity Pumps Dealers

• Pump body: Cast Iron, Cast Steel,CF8,CF8M
• Stators: EPDM (to 260 Deg F)

HYDRO PROKAV KM 2000 SERIES PUMPS Hydro Prokav KM 2000 Series pumps are built with rugged gear-type universal joint which is the effective solution to handle heavy radical thrust loads. This design ensures best performance with very minimal maintenance, low wear & Tear rotating parts and longer life of pump. Special Option to suit every application- Flush gland Allows Gland Pocking leakage to be flushed away from the pump preventing severe damage to seals and packing. Permits controlled leakage of process or flush fluid to reduce friction and dissipate heat. Inlet and outlet connections for flushing leakage away to drain Ideal for waste water treatment.sugar, petrochemical and paper industry applications. Available with flanged and wide throat version with or without shaft sleeves. Sailent features of Hydro Prokav KM 2000 progressive cavity pumps   low total cost of ownership Positive displacement non-pulsating flow Accurate, repeatable flow Head independent of pump speed Low NPSH Requirement Self-priming High suction lift upto 28 feet low shear particles upto 2.8 ” in diameter Reversible Viscosities up to 1,000,000 cps No valves to clag, Stick or Vapor lock No timing gear adjustments. High Valumetrics and mechnical efficiency Smooth fluid discharge no vibration Easy to maintain Wide temperature range to 400 Deg F Ideal for metering applications Easy to regulate Superior abrasion resistance RANGE OF PRODUCTS Wabble stator pumps L frame pumps KM 1000 series pumps KM 2000 series pumps KX series PX series Wide throat pumps Bridge breaker pumps Sanitary design quick clean pumps Vertical/ Drum emptying PC pumps   Materials of construction Pump body :Cast Iron, Cast Steel,CF8,CF8MInternals,Including Rotor :Alloy Steel,Tool Steel,AISI 304,AISI 316,Stators:EPDM (to 260 Deg F)Fluoroelastomer ( to 400 Deg F)Nitrile (to 210 Deg F)Natural Rubber( to 185 Deg F) The heavy duty transmission train A. Gear Type universal joints with perfect sealing of rubber sheath prevents contamination of joints and foreign particle entry to joints and foreign particle entry to joints during pumping of fluids.B. The grease lubricated gear joints can very well operate up to 90 Deg C, far higher than other oil lubricanted joints.   C. Thrust Plates are clamped by pins ensuring maximum life for gea joints and smooth functioning. D. The lenghty Coupling rod design maintains shaft angularity of less than 1.5 Deg for reduction stress on gear joints and on Bearings. Low maintainance casing & bearing housing assembly A. Hydro Prokav KM 2000 series pups are built with grease packed tapered roller bearing for withstanding better load conditions of the rotating parts.B. Sturdy casting improve pump performance by reducing vibration load to the shaft and bearings   C. The gear joint on shaft side reduces the radial thrust on drive shaft and bearings and requires minimal pump disassembly. Drive Shaft assembly A. Hallow single shaft design reduces run-out for extended packed gland or mechanical seal life.B.Stuffing box assembly can accommodate single/double mechanical seal or different types of packing. Additional Features A.Suction chamber allows full 360 Deg rotation for easier piping installation.B. Suction and discharge flanges as per ANSI,BS,ASA,DIN OR JIS for easy installation   C. Drain plug provided at the casing ensures the total drain of liquid form casing before inspecton or during maintenance D. All pumps are provided with inspection ports on either side for efficient cleaning. E. Gland area is drilled and tapped for easy disposal of stuffing box leakages. Unique Fitment of pumping elements A. Precision machined rotor and elastomer stator design reduces slippage for higher efficiency and improved volumetric effeciency.B. Hard Chrome plated rotors provide high abrasion resistance and longer service life.   C. Wide variety of elastomers available for every applications with proven qualities

PC – 12B Mini Condensate Drain Pump Low noise control Compact modern design High flow rate Built – in alarm circuit Suitable for all kinds of air conditioners Voltage : 100 ~ 230V,  50/60 Hz Suction lift : Max.2m(6.5ft) Discharge head :  Max.10m (26ft) Flow rate : Max.12L/H (3.2GPH) Tank capacity : 35ml

• Pressure: UP TO 25KG/CM2
• Temperature: UP TO 120 DEGREE CELSIUS
• Design: SELF PRIMING
• Model: KCP
• Brand Name: K-TECH
• Head: Up to 250 mtr
• Material: C.I.,C.S.,S.S.
• Max Flow Rate: Dn 25 to 150 mm
• Capacity: UP TO 145M3/HR
• Speed: UP TO 600 RPM
• Discharge Size: 25 TO 150MM

We offer Progressing Cavity Pumps which have a capacity upto 180 m3/hr. Also; our Progressing Cavity Screw Pumps have numerous applications such as Effluent Sewage, Chemicals, Paints, Food, Beverages, paper & pulp, Molasses, Magma, Massecuette, Melt, Syrup and Oil & Gas. We are one of the prominent Progressing Cavity Screw Pumps Manufacturers and Suppliers in India as well. Progressive Cavity Screw Pumps Applications : Effluent Sewage, Chemicals, Paints, Food, Bevarages, paper & pump, Molesses, Magma, Massecuette, Melt, Syrup Oil & Gas. Delivery Size up to : 200 mm Capacity up to : 180 m3/hr Pressure : 36 kg/cms2 Vescocity : 1 million cP Material of Construction as Cast Iron, Stainless Steel, Bronze, Alloy Steel as per Customers Requirements & Application of Pumps.

• Type: Progressive Cavity Pumps
• Certification: ISO 9001:2015 Certified
• Application: Mobile Pumps
• Voltage: 415 V
• Power: Electric
• Pressure: High Pressure
• Structure: Screw Pump
• Temperature: 1-80 Deg C
• Working Pressure: 24 Kg/cm2 (max)
• Viscosity Range: 1-50000 Cp, 50000-100000 Cp
• Country of Origin: India

• Type: Progressive Cavity Pumps

Typical Applications Loading & Unloading, Transfer, Polymer Feed, Dewatering, Sludge Transfer, Chemical Feed, Centrifuge Charging, Filter - Press Charging, Kiln Charging& Drainage, Metering, Pit Emptying, Metering Maximum performance data Capacity : upto 2700 lpm Diff. Pressure : upto 24 bar   Operating parameters Viscosity : 1 to 100000 cSt Fluid Temperature : upto 120 °C

We are developing and supplying special requirements of Pump Parts like Casing, Impeller, Stuffing Box, Bearing Housing from Gujarat, India. Satisfied projects and industrial needs through supplying Borehole Pumps, Chemical Process Pumps, Corrosive Media Pumps, Centrifugal Pumps, Dewatering Pumps, Drainage Pumps, Industrial Water Pumps, Jet Pumps, Mud Pumps, Multistage Pumps, Split Case Pumps, Selfpriming Pumps, Submersible Pumps, Sea Water Pumps, Slurry Pumps, Sewage Pumps, Liquid Ring Vacuume Pumps etc. (please find attached files for few of our products) Since 2001 we are also engaged in: - Engineering manufacturing services - Developments of molds for castings - Industrial Engineering equipment developments - Redesign and conversion of pumps parts etc. We would like to explore supplying opportunity of our products to your esteemed Organization. Please let us know your specific requirements as a trial basis, we assure you that we can be a long term supplying vendor to you based on our quality tailor made products and business ethics.

• Country of Origin: India
• Weight: 5-10 Kg
• Voltage: 220-440V
• Automatic Grade: Semi Automatic
• Power: 0-5Kw
• Driven Type: Electric
• Pressure: High Pressure
• Running RPM: 0-1400

The unique pumping principle applied employs a highly precision manufactured Metallic Single helical rotor turning inside a double internal helical resilient stator. Thereby forming cavities confined by a "Sealing Line' which is main¬tained at a stand still and during rotation. Whilst the rotor rotates in the stator, the cavity formed between them progresses from suction to delivery side, gently carrying the medium.   Good self-priming properties even with air or gas inclusion in the lquid upto 8.5MWC.   Handles solids in suspension or mixture containing a high percentage of solids. Bigger size pumps up to 40mm dia.   Steady and smooth flow with little pulsation makes it suitable for dosing and metering duties.   The direction of the flow through the pump is reversible by merely changing the direction of rotation of the prime mover.   The pressure head is independent of speed and capacity is proportional to speed.   Gate and check valves are not necessary.   The metal bonded high precision moulded stator ensures, high efficiency pressure and increased life.   The unique pumping principle applied employs a highly precision manufac-tured Metailc Single helical rotor turning inside a double internal helical resilent stator. Thereby forming cavities confined by a "Sealing Line' which is main¬tained at stand still and during rotation. Whilst the rotor rotates in the stator, the cavity formed between them progresses form suction to delivery side, gently carrying the medium.   Good self priming properties even with air or gas inclusion in the lquid upto 8.5MWC.

Raw materials are the inputs which are used for the production of the finished goods and thus it becomes essential for us to check the quality of the inputs before procurement. Thus, our experts do the needful. In our spacious warehouse, we store the entire lot under safe environment ensuring zero damage to the products. Moreover, we have hired experts to keep a check on the same.

• Pressure: Up to 12 bar
• Pump Size: 2 to 12 Inch
• Capacity: Up to 200 M3/Hr
• RPM: Up to 500
• Model No: BD

Application Light Molasses Heavy Molasses Low Temp. Final Molasses

Flosys pumps has wide ranges of progressive cavity pumps to suit different application in the process industries. Our pumps to handle varieties liquid like non viscous, viscous, corrosive, abrasive, high consistent, hygienic, fibrous ,sludge, slurries with solid in suspension such as semisolids including non newtonian fluids etc. We offer different material of construction depend up on the application as our pumps are tailor made to fit for the system requirement, like aisi 304, aisi 316, aisi 316l etc. Flow rate ranges from 0 - 500 m3 hr and pressure 6, 12,24,36,48 bar extra

• Power: Electric
• Application: Mobile Pumps
• Type: Progressive Cavity Pumps
• Structure: Screw Pump
• Country of Origin: India
• Temperature: 1-80 Deg C,80-160 Deg C
• Maximum capacity: 20 LPH to 500 LPH
• Maximum Temperature: 150 Degree C
• Max Pressure Head: 24 Bar
• Maximum Viscosity: 2,000 cSt

We deal in range of progressive cavity pumps that are built with rugged gear-type universal joint which is the effective solution to handle heavy radical thrust loads. This design ensures best performance with very minimal maintenance, low wear & tear rotating parts and longer life of pump. Unique fitment of pumping elements a. Precision machined rotor and elastomer stator design reduces slippage for higher efficiency and improved volumetric effeciency. B. Hard chrome plated rotors provide high abrasion resistance and longer service life. c. Wide variety of elastomers available for every applications with proven qualities sailent features of hydro prokav km 2000 progressive cavity pumps ⷠlow total cost of ownership ⷠpositive displacement ⷠnon-pulsating flow ⷠaccurate, repeatable flow ⷠhead independent of pump speed ⷠlow npsh requirement ⷠself-priming ⷠhigh suction lift upto 28 feet ⷠlow shear ⷠparticles upto 2.8 � in diameter ⷠreversible ⷠviscosities up to 1,000,000 cps ⷠsimple pin-type universal joint drive assembly for easy maintaince ⷠmodular design ⷠwide selection of materials of construction special designs available confirming to api 676.