Protection Relay Dealers

• Type: Protection Relay
• Frequency: 50Hz
• Country of Origin: India

PIC make Protection Relay

• Input Supply: 1 Phase 230 V, 50 Hz AC supply.
• Input Current: 0-15 Amps
• Accuracy: Current
• Resolution: Current
• Working Temp: 0 to 55 degree C
• Storage Temp: 10 to 70 degree C
• 3)Relative humidity: 0 – 95 % non-condensive
• Warm up time: 5 Sec
• Protection: Voltage( Under and Over ) ,Current ( Over Load and Under Load)
• Mounting: wall mounting.
• Enclosure: 90 (W) X 200 (H) X 60 (D) mm.
• Terminal: Screw ON Terminals.

Supported by a team of hardworking professionals, we have been able to offer a range of Motor protection devices. The products we offer are developed employing latest technology in accordance with international quality standards. Available in different sizes, designs and specifications for motor protecting , these products are widely used for having hassle-free functioning of boilers in various domestic and industrial purposes with wide range of controls and PLC nad DCS controls

• Aux Supply: 110 VAC TO 415 VAC
• CT Type: DIN Rail Mount CT Unit up to 61 A & External Phase CTs for above 61 A
• Operating Temp: +10 TO 60 Degree Centigrade [Operation]
• Voltage Type: AC
• Display: Current Through 7 Segment LED
• Output Contact: P-NO-NC [3 A 240 VAC]
• Mounting: Device Door Mount [Door Cut out 92 X 92 mm]
•  :  
•  :  

Features Suitable for 1A / 5A relay rating Choice of 6 IDMT curve and definite time History of 6 latest faults along with settings Self supervision facility Breaker status monitoring In-built breaker trip circuit supervision Disturbance records (DR) in IEEE COMTRADE format – Optional Event Records (ER) – Optional Programmable digital inputs and outputs MODBUS open protocol over RS – 485 port MODBUS protocol over RS – 232 port Draw out facility with inbuilt CT shorting Principle of Operation: JNC 268 N / JNC 268 A / JNC 268 L : The relay measures the line current from each of the line CTs and if the current exceeds the set threshold, then relay extends a trip signal after an operating time. The relay's “operating time” is determined by selecting “definite time” or one of the six “inverse time” characteristics. A sensitive earth fault or restricted earth fault (suitable for high impedence REF scheme) is provided in the relay.The input to sensitive earth fault protection can be connected in two ways. First one the residual current derived from three phase current transformers, and second is low output core balance current transformer can be connected. The input to restricted earth fault protection will be derived from neutral CT output with external stabilizing resistor.The relay has facility to monitor circuit breaker operation through 52a or 52b aux contacts of circuit breaker. 4 programmable digital inputs (PDI) and 4 programmable digital outputs are provided and can be used to synthesize logic along with some internal digital inputs i.e.(phase OC pickup, Earth fault pickup, Phase high set trip, Earth fault OC trip, Earth fault high set trip,etc). Together, this feature can be effectively used to reduce the number of aux. tripping relays in a protection scheme. The trip relay (B1-B2) can be operated either when any one / more of the protection scheme provided inside JNC 268 x initiates the relay or any/more of the PDI initiates the same relay. Each PDO has independent timer. Each PDI has programmable mask facility.The relay in-built breaker trip circuit supervision and dedicated alarm contact to indicate trip circuit failure. JNC 268 A : Provides Multi shot auto re-closer facilitates automation of breaker operation. Auto re-closer can be programmed to provide a maximum of five shots. “Dead time” starts when a trip signal is provided due to the occurrence of a fault involving L-L or L-G or L-L-G or L-L-L or L-L-L-G. After an elapse of a time interval equal to “dead time”, closing command will be extended. The “reclaim time” timer starts at the instant when the “dead time” timer expires. If after extending the “breaker close” signal an over current fault was detected before the “reclaim time” timer reached its terminal count, then the relay understands that the fault in the system is still persisting and the over current relay will issue a trip signal. The relay tries to close the breaker for a maximum of the programmed number of shots before it choses to lockout. The relay can be configured for independent trip sequence as IDMT or Def. time JNC 268 L : The relay monitors line current even after the trip condition to ensure breaker operation. Even if small current exist in the line the relay sends trip command to adjacent or backup breaker after definite operating time. The current threshold and definite time required to detect breaker failure are programmable.

• Brand Name: ELLICO
• Weight: 0.336 gms
• Supply voltage: 230V AC, 415V AC
• Trip time delay: Less than 2 sec
• Resetting: Automatic
• Indication: Healthy and trip
• Contact rating: 6 Amp
• Output Relay contact: 1 C/O
• Enclosure: PVC Box
• Dimension (HXWXD): (113 X 78 X 51)
• thermistor Sensor healthy: 40 ohms-4 k ohms
• Thermistor Sensor trip: 4.1 k ohms-5.5 k ohms
• Thermistor Sensor open: 5.6 k ohms & above
• Thermistor Sensor short: 40 ohms & below

• Brand Name: EcoSmart
• Usage: Industrial Control Panels, PCC, MCC
• Size: Bazel Size 96x96 Depth 68 mm
• Type: Panel Door Mounting
• Model Number: MPR-250
• Place of Origin: Vadodara, India
• Theory: Micro Computer based
• Aux. Supply Voltage: 110V AC, 230V AC, Or As per requirement

Buyers can rely on us for the best in line products as we prepare them using the finest grade raw material and modern techniques. Also, the basic material is sourced from the reliable places. Our payment terms and conditions and easily comprehensible and our methods are practical. We do not impose hidden charges and ensure business is carried out ethically.   Listed below are the quality attributes of our range : Current base smart logic motor monitoring algorithm for protection Instantaneous response to abnormal supply or load conditions 7 segment LED display for monitoring all three phase currents as well as tripping annunciation Menu driven user interface with 3 Key & 7 segment LED display Easily programmable protection parameters & trip delay settings Site selectable trip class for customized trip characteristics based on motor type, & nature of application Displays and records trip events for enhanced fault analysis Option available for RS 485 connectivity for interfacing with PC or DCS Wide operating voltage range (Control supply) 90 V to 270 V AC (other options available on request) Applicable for 3 phase induction motors up to 2500 Amp   Approx Price : Rs 6,800 / Piece(s)

• Packaging Type: Carton Box, Wooden Box, Metal Sheet Box
• Overall Weight: 100gm, 200gm, 300gm
• Usage: Factories, Power Plants, Shopping Malls, VCB
• Specialities: Stable Performance, Shocked Proof, High Performance, Heat Resistance, Durable, Dipped In Epoxy Resin
• Size (Inches): 4-6 Inches, 6-8 Inches, 8-10 Inches
• Overall Dimension: 580x260x465mm
• Witdh: 80-120mm
• Relay Height: 40mm
• Relay Length: 30mm
• Brand Name: CG
• Shape: Square
• Condition: New
• Phase: Single Phase
• Warranty: 1 Year
• Country of Origin: India
• Current Type: AC
• IP Rating: IP30-50
• Corrosion Resistance: Yes
• Number of Poles: 3 Pole
• Terminals: 3 Terminal
• Switching Voltage For Zero: 220V

• Material: Plastic
• Finishing: Polished
• Current Type: DC
• Color: Black
• Condition: New
• Power Consumption: 6W-10W
• Usage: Mines, Factories, Power Plants
• Certification: CE Certified
• Voltage: 110V
• Mounting Type: Base Mounting
• Relay Type: Oil Filled
• Specialities: Stable Performance, Shocked Proof, High Performance, Heat Resistance
• Overall Dimension: 275x90x285mm
• Size (Inches): 4-6 Inches, 6-8 Inches, 8-10 Inches
• Thickness: 0-10mm, 10-20mm
• Phase: Triple Phase
• Warranty: 1 Year
• Country of Origin: India
• Number of Poles: 4 Pole
• Terminals: 3 Terminal
• Rust Resistance: Yes
• Witdh: 50-80mm, 80-120mm, 120-150mm
• Relay Height: 30mm, 40mm, 50mm
• Relay Length: 20mm, 30mm, 40mm

• Voltage: 230 V
• Frequency: 60 Hz
• Phase: 2 Phase
• Ambient Temperature: 10 to 50 Degree Celsius
• Current: 5A
• Type: Protective Relay
• Power Source: Electric

• Country of Origin: UK
• Voltage: 220V
• Condition: Used
• Current Type: AC
• Mounting Type: Base Mounting
• Usage: Mines, Factories, Power Plants, Shopping Malls
• Packaging Type: Carton Box

Kriwan int 69/69f motor protection relay 250v~10a 1500vaFind many great new & used options and get the best deals for Kriwan int 69/69f motor protection relay 250v~10a 1500va at the best online prices  

digital motor protection relay is fully digital auto switch for pumpmotor with inbuilt protection unit. following protection covers overload under current (dry run) single phase preventing reverse phasing over voltage under voltage unbalance balance voltage also, in built time delay and digital display for voltage and current.

• Size: 96mmX96mmX65mm
• Type: Microprocessor based motor protection device
• Model Number: LEDX

Being one of the renowned firms in the industry, we are decidedly involved in providing a premium quality array of Motor Protection Device. Note: CE Certification Model: LEDX Protections: Over Load Under Current Earth Fault Locked Rotor Short Circuit Single Phase Unbalance Phase Reversal(optional) Over Temperature(optional) Range: 0.4 to 12.5A 0.8 to 25A 2 to 62.5A 4 to 125A 40 to 250A 80 to 500A 100 to 1000A 200 to 2000A Display type: LED Seven Segment, 4 Digit Size: Panel Mountable 96X96X65 Note: All Dimensions are in mm

The Protection Relays, provided by us, are known for its excellent performance as well as high durability. Now purchase Protection Relay at highly affordable prices from us. We are its well-known supplier in the country. Buyers can rely on us for the best in line products as we prepare them using the finest grade raw material and modern techniques. Also, the basic material is sourced from the reliable places.

• Country of Origin: India
• Color: Grey
• Voltage: 440V
• Condition: New
• Finishing: Polished
• Warranty: 1 Year
• Current Type: AC
• Mounting Type: Base Mounting
• Power Consumption: 2W-5W
• Corrosion Resistance: Yes
• Terminals: 7 terminal
• Relay Type: Dry Filled
• Rust Resistance: Yes
• Brand Name: Jai kisan
• Shape: Rectangular
• Usage: Factories, Power Plants
• Specialities: Stable Performance, Durable
• Size (Inches): 4-6 Inches
• Working Temperature: 25---45 degree

Our range of Motor Protection Relay is used to identify inefficiency in machines and reduce panel space, wiring & installation time. We provide Motor Protection Relay in desired specifications. The range of Motor Protection Relay provided by us is used in major industrial and commercial areas. The Motor Protection Relay provided by us is rich in features. Features State-of-art micro controller-based designRelay output for cutoff / alarmUser programmable alarm set point, time delay & CT ratioTrue RMS measurementAuto-scrolling facilityPassword protectionBar graph indication for loadAlarm / tripUnder voltage Over voltage Over load Phase sequence reversal Phase failure Ideal For Control panelTest benchDistribution systemsAPFC panelGenerator setsEnergy managementMotor controlProcess control & SCADA

• Brand Name: ABB
• Material: Aluminium
• Finishing: Powder Coated
• Current Type: AC
• Shape: Rectangular
• Condition: New
• Power Consumption: 6W-10W
• Usage: Mines, Factories, Power Plants
• Certification: CE Certified
• Voltage: 110V
• Mounting Type: Din Rail Mounting
• Phase: Triple Phase
• Warranty: 1 Year
• Country of Origin: India

Being a reliable name, we are focused towards delivering exceptional quality range, along with this, we follow strict guidelines and conduct regular quality examinations to ensure quality. We are equipped with the upgraded machines and technology, thus, we are capable of making stern packaging of products. To keep the product safe from external factors, we make use of finest packaging material.   Protection Elements for Comprehensive Numerical Transmission Line Protection Relay; Impedance Function : Single Phase Distance Protection Four Independent Groups Five Independent Zones of Protection Permissive Over reach Trip Transfer (Z1ext.) Independent Polygonal/Mho characteristics for Phase to Phase and Phase to Ground Faults Power swing Detection Load Encroachment Detection Settable Switch On to faults and Auto Recloser VT Fuse Fail Circuit Breaker failure(50BF) Disturbance Recorder 16 Red, Green LED for Indications Relay healthy indication (Green). Relay Design Features : Minimum operating time of 1.5 Cycles (30msec). Large 20x4 LCD display for Parameter and setting display. In built Real Time Clock with non-volatile memory for time stamping. Display of various counters Disturbance Recorder - Up to 1sec of actual waveform of current & voltage along with logical and physical status are captured & saved in built-in memory with date time stamping, for analyzing fault condition & fault location. Online display of CB status and other digital and logical status. Continuous monitoring of module’s internal hardware and alarm generation in case of failure of any critical components. 10 Programmable Digital Output contacts. 8 Optically isolated digital status input for monitoring of status and avoid use of external relay logic. 2 dedicated status input for Trip Circuit Monitoring. 100 nos. of event memory, event such CB close, Trip, digital status change, relay pkp etc. All events are with date and time stamped with up to 1ms accuracy. 10 nos. of Fault data stored with keypad interface and time. Display of Voltage, current, frequency, Reactance, Resistance in terms of secondary value. Control Panel: Control Panel suitable for the testing of Numerical Distance protection relay, Mainly consist of Power Input 230V AC 50 Hz, Built in variable current source 0-20 Amp and Variable Voltage source: 0-250V AC, Time interval meter- stop/ start timer digital, Power ON/ OFF mains switch/ MCB, power ON indication, Control circuit for Current injection and voltage injection. Auxiliary power supply for relay 220 or 110 or 48 or 24 Volts AC or DC. Built in digital Ammeter and Voltmeter. With fault simulating switchs.

• Packaging Type: Wooden Box
• Overall Weight: 5 kg
• Usage: Factories, Power Plants, Ship
• Brand Name: ABB
• Shape: Square
• Color: White
• Voltage: 24 VDC
• Country of Origin: India
• Current Type: DC
• Condition: Used

• Material: Aluminium
• Voltage: 110V
• Frequency: 50Hz
• Type: Protection Relay
• Application: Power Protection
• Weight: 0-100gm, 1-2kg, 100-200gm
• Operating Temperature: -25 +85deg C

We have garnered acclaim as the Manufacturer and Supplier of Digital Protection Relay from Odisha, India. The offered Distribution Protection Relay is noted for its dimensionally accurate design, efficient performance, reliability and long functional life. Available in variants such as Busbar Protection Relay, Feeder Protection Relay, Machine Protection Terminal Relay, Electromechanical and solid state relays, etc., customers can acquire it at nominal rates.Uses : Distribution Relay is used for feeder protection and general power system protection to provide instantaneous or time overcurrent protection The solutions offered are for Arc fault protection. Grid automation, Distribution automation, and many more.