Pump Automation Systems Dealers

Features Automation System is advance micro controller based and designed for TWIN PUMP installations and can operate both pumps in wide variety of modes. The user can use the system on single pump installations also and the second pump control can be used as a redundant or stand-by feature. The operation of the pump is done by switch ON and switch OFF time, which is stored as one sequence in Automation System̢۪S memory. The user can set 9 sequences in a single day such sequence into Automation System. Automation System also gives Time Compensation against power bad condition. Automation System also equipped with LEVEL based pump control system. The system automatically starts the pump when water level down to set level in the OHT and stops the pump when water level reaches to high level in the OHT (Over Head Tank) or low level in the UGT (Under Ground Tank). The system does not allow starting the motor when water level in the UGT is not sufficient and protect the motor from dry run. Automation System provides protection against reverse phasing and single phasing. Automation System provides time delay (from 1 min. to 10 min.) when power recovers or pump tripped or pump OFF event occurs. This will be provided to avoid nuisance tripping, protects pump and prevents pipeline from back water thrust. Automation System also equipped with pressure sensing technology. In certain cases when all the taps of the pipelines are not in use (approx. 60% of taps are closed), pressure in the pipeline will rise and that damages the pipeline joints or pipeline. To protect from this over pressure, Automation System is equipped with settable pressure gauge. When pressure rise up to the limit, system will automatically tripped the pump and prevents the pipeline. For maintenance point of view, Automation System will continuously calculate and totalize total no. of hours of pump ON operation.

Over flow alarm 220volt Transformer

A water pump is used to transport water from one location to another. To suck water in so that it can be expelled, a pump must be able to rapidly alter pressure within a system. How a water pump achieves this pressure change is what allows certain pumps to be more beneficial to certain applications than others.

• Type: Water Pump House Automation
• Certification: ISO 9001:2008
• Color: Blue
• Voltage: 220V
• Condition: New

As the ideal fit for pump houses, pump stations & wastewater pump stations, Pump House Automation System can help to control water pumps for maintenance of water level within normal limits. It sends alarm messages immediately to Internet SCADA and to service men's GSM (Mobile) phones in the event of an abnormal condition. It is equipped with an energy meter which can easily calculate  approximate power consumption and costs.   Remote Control Operation : User can send commands from the web browser or SCADA application to the remote pump house to switch on/off montors. Switching can also be done from the mobile phone. You get a response SMS for every action.  Data Storage & Monitoring : The data is stored on server for analysis & report generation . Server is hosted (24/7/365). Customer doesn't need to investments on server PC and its maintenance tasks.Customer can see status of their remote targets, print monthly reports, analyze productivity, check maintenance.browse alarm views, trend views, process picture views, target control views, report views, trouble ticket views...    Features in SCADA : Fault diagnostics and reports Days min/max values Hourly averages Pump efficiency bargraph curve Pumps operating counts & times day, week, month, year diagrams. Power consumption day, week, month, year diagrams Flow rates day, week, month, year diagrams All information can be read to EXCEL for own reports etc.

For continuous measurement of liquid level and to control auto/manual pumpimg system  

SCADA & Telecom for Control & Monitoring of wide spread Assets E-house and Electrical Power distribution system Wellhead Automation, Instrumentation and Fieldbus solutions Variable Frequency Drives and Soft-starters High Integrity Pressure protection System ( HIPPS) Integrated control system comprising DCS , ESD and F&G Turbine control system

Total command area is of 6978 hectares and it is divided into 57 zones of approximately 100 to 150 hectares and each zone is further divided into 16 sub-sections.After detailed designing Saisanket was able to optimize the cost of Distribution Network with the use of Air Management System, Outlet Management System, Electric Energy less and Wireless Automation etc and enable client to use these system for better efficiency, Project can operate as per the variable schedule depends on varying crop water requirement , rainfall, Maintenance, No Water Requirement.Remote Metering, Controlling, monitoring & synchronization of 912 nos Outlets Chaks (Discharge at every outlet is from 50 lps to 110 lps) with zonal pumping stations , intake & 2nd stage pumping station.

Aqua-SCANET is the SCADA system designed specifically for real-time online monitoring and control of water distribution networks. All key water distribution parameters for public and industrial water distribution are monitored controlled. The system provides wireless monitoring of the Pumping Stations, Tubewells and associated flowproduction data and valve operations on control room PC and also provides real time alarmsdata on your mobile sets. Special control options of remote dial-in and auto dial-out enable the user to remotely access the status of critical plant parameters. Uninterrupted operation of control system is guaranteed by automatic transfer to battery mode in case of power failure. It also supports a variety of communication options including existing telephone network, RS 422485 wired network, VHFUHF Wireless radio network and Satellite global network.

• Supply Voltage: 415 V AC +20%,-25% 50/60Hz ± 3% Auxillary : 90-270 VAC/DC ± 20%, 50Hz
• Output Contacts: 4 x 1 CO Relays (for 2 pumps)
• Current sensor: External CT5 / CT20 / CT50

M-Commander is a micro-processor based Motor protection and Pump management system, suitable for 2 pumps, Sensing voltage, current and temperature, Protecting against Phase Failure, Unbalance, Phase sequence, Under/over voltage, Overloading, dry running, winding over temperature, Over current/Short circuit, Locked rotor, earth fault. Auto/Manual resetting, Adjustable trip settings for UV/OV, UC/OC, O/L, Locked rotor & earth fault, On delay & start-up delay adjustable, 2x1CO output relays RTC based time settings, Water level control. Motor protection Includes Under /Over voltage protection Single/Reverse phasing protection Voltage / Current unbalance Overload trip Over current protection Dry running protection Earth fault protection PTC based winding overheating protection

Pump Automation System, poly green house, Drip Irrigation System

water pump automation system, Energy Saving Devices

water pump automation system, Fisher Clamp, Wire, Led Light, Ceiling Fan

pump automation systems, high voltage rectifiers, tacho generator

water pump automation system, Light Management System, Energy Saving System

water pump automation system, Control Panels, water pump automation system

water pump automation system, Architectural Drafting, breaks, water supply