Pump Bowl Dealers

• Bore Size: 150/200
• Discharge L.P.M(Approx): 500/600

Pump bowl, These applications include raw water intake, liquid transfer, cooling water circulation, booster service, storm water, flood control, marine, process services, volatile fluids, condensate, fuel pumps and mine dewatering. KISHAN turbine pump applications are found in a variety of markets including: urban and rural municipal water, irrigation, chemical processing, primary metals, petroleum, power plants, mines, food processing, offshore platforms, and more. Parameters of vertical pumping applications require the units be available in a variety of pumping configurations to meet user needs. Fairbanks Morse meets these demands by providing pump bowls from V-6,V-8,V-10 in diameter. Turbine bowls can be staged in series to produce the necessary discharge pressures.

• Product Code: 1309
• Price: Rs 199
• Quantity: 1

Nabhi Pump-Katori /  Solar Plexus Pump A large number of disorders/diseases of the human body are attributable to disbalance of the solar plexus located below the navel between upper and lower abdomen.  in many cases that if the solar plexus is disbalance any treatments is not effective. There are many methods of correcting a disturbed solar plexus. The solar plexus pump is effective and convenient device used to correct the disturbed solar plexus. Method :  The patient should lie down on his/her back on a flat, hard surface with both legs touching and stretched. The arms should also be stretched and be resting on the sides of the body. The patient himself/herself or another person should then place the solar setter directly over the navel. To place the solar setter on the navel, press deeply the solar setter’s top closed, broader end with the fingers, thus allowing the air to escape out from the device and then gently put it on the abdomen in such a way that the center of the bowl is directly over the navel. The solar pump will now stay put in its place on its own and will gradually bring the displaced solar plexus in the center of the abdomen due to its vacuum action. As the displaced solar plexus keeps moving towards the center of the abdomen, the pressed rubber device will keep opening out gradually. Once the solar plexus is fully corrected, the solar setter will fall off on its own. If the solar setter does not fall off on its own within half an hour, it is unlikely that solar plexus will get corrected in one session and the exercise should be terminated for the day. To remove the solar setter, press one side of the abdomen with a finger, thus allowing air to rush into the device that will then fall off. After the exercise is complete, the person should gradually turn the body to the Left and gradually get up. It is important to get up gradually to avoid re-displacement of the just corrected solar plexus. The exercise should be carried out daily till the solar plexus is firmly set in its correct position. Precaution : Never attempt to use the  Solar Plexus Pump until patient is empty stomach. The process is best to do in the morning. Children below 8 years, very old and weak persons, abdomen surgery cases, umbilical hernia cases and pregnant ladies must not use the  Solar Plexus Pump. There are other methods available to correct the solar plexus of such persons. If Solar Plexus Pump does not fall off on its own in stipulated time, strictly remove it from the abdomen as described above. Never attempt to pull off the solar setter from the abdomen as it may severely tear the abdominal skin in the process.

We are manufacturer and exporter of submersible pump parts. Steel Melt established in 1994. We are based at Rajkot, Gujarat.

• CASTING: CASTING

We are supported by a team of professionals who ensure that the offered lot is prepared using the best quality raw material. Also, they confirm that the material is sourced from the certified places. Owing to our timeliness and hassle free deliveries, we have become the primary choice of the buyers. Specifications CF8, CF8M, CF3M Features Heavy metal Finely finished Corrosion resistant

We are the leading manufacturers, exporters and supplier of this products.

The stage casing of radial pumps are connected by metal straps, those of mixed flow pumps by stud bolts.A suction casing is fitted between the pump & motor. Suction casing is fitted with strainer to protect the pump from coarse particles sand in the fluid. Pumps with check valve (non-return valve) in option are supplied. Available with threaded particularly suitable for vertical installation in narrow deep wells. Additional bearings are fitted depending on the number of stages. Stainless Steel inserts are fitted to the impeller. The impeller hub is protected by stainless Steel inserts are fitted depending on the number of stages. Stainless steel inserts are fitted to the bowl in mixed flow version and in radial flow pumps available with Bronze bush in each stage casings. The impeller hub is protected by stainless steel inserts. This design improves the starting torque & has the effect that solid particles such as sand are propelled outside.

• Model: Turbine
• Brand Name: JL
• Material: Cast Iron , Stainless Steel
• Surface Treatment: Spray Coating

Bush Leaded tin bronze 4 Bowl (V3 & V4) F-Tech diffuserbowl are made from GFN-3 Vergine (Noryl) With Stainless Steel Jacket. V3: OD 64.5mm & 69.5mm Model: F2, F4, F5, F7, F10 V4: OD 81mm Model: F1, F2, F4, F5, F7, F10, F12, F18 Bowl (V4, V5, V6 & V8) F-Tech diffuserbowl are made from Stainless Steel 304 grade non magnetic investment casting material. V6 Model: F50, F60, F80, F100, F125, F150, F200, F250 Stamping Made from M-45 grade imported sheet having high silicon.

Stainless Steel 4SP / 6SP / 8SP Bowl Impeller Sets Entire Range of 4” to 8” SP Series Borehole Pumps 4” – SP 2 TO SP 14 6” – SP 17 TO SP 90 8” – SP 77 TO SP 125 Completely Construction of Stainless Steel AISI 304 High-Efficiency Stainless Steel Impellers and Diffusers. Proven Performance Specifications with Ideal Head vs Discharge as per requirements. Excellent Hydraulics saves input energy and increase performance. Lifelong durable, highest strength and ultimate withstanding capacity. Designed and Built for Years Of Trouble-Free Operation.

• Bowl Size: 10Inch, 3Inch, 4Inch, 5Inch, 7Inch, 8Inch, 9Inch
• Type: Pump Bowl
• Material: Cast Iron
• Thickness: 0-5mm, 10-15mm, 15-20mm, 20-25mm
• Usage/Application: Pump Use
• Color: Blue, Creamy, Light Green, Orange, Yellow
• Features: Durable, Eco-friendly, Hard Structure, Heat Resistance, Unbreakable
• Capacity: 0-500ml, 1-2ltr, 2-3ltr, 3-4ltr
• Surface Finishing: Coated, Non Coated
• Technics: Handmade, Machine Made

• Size: 10Inch, 4Inch, 7Inch, 9Inch
• Type: Pump Bowl
• Material: Brass, Copper, Glass, Metal, Plastic, Stainless Steel
• Thickness: 0-5mm, 10-15mm, 15-20mm, 20-25mm, 5-10mm
• Usage: Pump Use
• Color: Blue, Creamy, Light Green, Orange, Yellow
• Feature: Attractive Design, Durable, Heat Resistance, Light Weight, Unbreakable
• Capacity: 0-500ml, 2-3ltr, 4-5ltr, 500-1ltr
• Surface Finishing: Coated, Non Coated
• Technics: Handmade, Machine Made

• Material: SS
• Usage: Industrial
• Size: Customized

• Size: Multisizes
• Type: Stainless Steel Bowls
• Material: Stainless Steel
• Shape: Oval, Round
• Usage/Application: Industrial
• Color: Light Grey, Silver, White
• Feature: Durablity, Eco-Friendly, Good Quality
• Pattern: Plain, Printed
• Surface: Polihsed
• Condition: New, Used
• Packaging Type: Cartpon Box, PP Bags

• Type: Pump Bowl
• Material: Aluminium, Copper, Metal, Stainless Steel
• Thickness: 0-5mm, 10-15mm, 15-20mm, 20-25mm, 5-10mm
• Usage: Pump Use
• Color: Blue, Brown, Light Blue, Light Green, Off White
• Feature: Hard Structure, Heat Resistance, Unbreakable
• Surface Finishing: Coated, Non Coated
• Technics: Handmade, Machine Made

• Type: Fuel Filter
• Supply Ability: 100000 Piece/Pieces per Day
• OE NO.: 000 090 06 50

• Material: Stainless Steel
• Color: Silver
• Shape: Round
• Thickness: 1.5 mm
• Finishing Type: Chrome
• Packaging Type: Box

• Material: Stainless Steel
• Shape: Round
• Rust Proof: Yes
• Finishing: Polished
• Pack Type: Box

• Usage: Spare
• Material: CI
• Brand Name: Shree Kuldevi Industries
• Country of Origin: Made in India
• Model Name/Number: Bowl
• Pump Type: Submersible
• Packaging Type: Plastic Bag
• Voltage: 220V

Multistage centrifugal submersible pumps have radial or mixed how impellers. These are cast ensuring smooth water passages. Dynamically balanced impellers and shaft assemblies guarantee minimal vibrations and wear on the bearing bushes. All the Bearings are water lubricated and protected from sand and other suspended particles. Discharge outlet fitted to the top bowl streamlines the flow which then passes through Non Return Valve. This can be supplied in screwed or flanged construction. Intermediate piece (suction housing) of the pump is fitted with pre formed strainer to prevent entry of suspended particulate matter. Cable clips and guard are provided to protect Submersible cable coming out of the motor.

We are the Manufacturer of Submersible Pump Impeller, Plastic Pump Impeller, Noryl Impeller, Submersible Bowl Impeller, Submersible Pump Bowl Impeller, Plastic Pump Bowl Impeller, Steel Pump Bowl Impeller, Plastic Pump Bowl Impeller, Agriculture Pump Impellers, Water Pump Impeller, Submersible Pump Impeller Diffuser, Diffusers Impeller, R – Series Bowl Impeller, Plastic Mold Developer, Texmo Design Bowl Impeller, CRI Design Bowl Impeller, PVC CNC Coupler Impeller, V3 Bowl Impellers, V4 Bowl Impellers, Pump Bowl Coupler Impeller, Submersible Pump Impeller Material