PVC Drift Eliminator Dealers

• Brand Name: KCSPL
• Material: PVC,PVC
• Color: Black, Grey
• Condition: NEW
• Feature: Rust Resistance, Waterproof, Weather Resistance
• Type: Pvc Drift Eliminator
• Country of Origin: India,INDIA

pvc drift eliminator pata with multi spacer

We are offering PVC Drift Eliminators manufactured from rigid PVC and are designed to remove entrained particles from air steam efficiently, with minimum pressure drop, thereby reducing the fan power requirement when the air passes through the drift Eliminator. Water droplets are separated from the air drift at the three direction change points on the drift eliminator. For crossflow tower applications, the almost vertical water conduits provided by the SPC 100 drift eliminator remove the water droplets out of the drift eliminator area and return them back into the tower and does not allow any re-entry. The special locking pin arrangement for SPC-100 facilitates quick and simple assembly at site. When used in counter-flow cooling towers, the measurable residual liquid load behind a droplet separator characterizes its efficiency. The performance data of our droplet separators have been determined under laboratory conditions. At a face velocity (CA) of 3.5 ms and a specific water flow (rw) -22tm2 h, the residual liquid load of the air is 15mgm3. If this residual load is related to the circulating cooling water volume this equates to a value smaller than 0.001%.   Fundamental conditions required to achieve these high efficiencies in practice are, a workman like installation, the droplet separator sections must be installed without any gaps between themselves or the tower walls to ensure by passing does not take place. The face value shall not exceed the maximum permissible value at any position across the total area of the separator. Any performance testing of the separators must be carried out immediately above the separators and by using a test method consistent with that employed in our laboratory or otherwise agreed with ourselves. We can advise on the likely operating efficiencies of specific towers provided that their operating data are made available to us.       Application Areas : Primary setting in wastewater treatment plants (suspended and flocculated solids) Secondary (biological solids) setting in wastewater treatment plants Solid-liquid separation in potable and industrial process water treatment plants, Anaerobic digesters (restrict loss of solids) Ash handling units in thermal power plants Process industry (material recovery from wash storm water) Oil-water separation

• Size: 100mm
• Type: Pvc Drift Eliminator
• Shape: Rectangular
• Thickness: 100-200mm
• Color: Grey
• Feature: Waterproof
• Dimension: 300X300mm
• Country of Origin: India

The eliminators can be supported at spans as high as 1800mm. Made out of UV resistant UPVC confirming tstandards set by CTI-STD 136, the V-100 drift eliminator uses the 3-pass system tair efficiently out of the drift eliminator while restricting the drift loss tless than 0.05% of circulating water.    Features and Advantages : Uniquely designed notches on the surface of the blade, positioned at the point on the drift eliminator blade where the air changes direction advances the principles of drift elimination.  Not only dthe drift droplets stay on the surface of the blade due to inertial forces but also as the drift laden air enters the drift eliminator assembly the notch on the bottom surface of the blade entraps the drift droplets while causing minimal resistance tthe circulating air. The air then changes direction to follow the sinusoidal path of the drift eliminator while the remaining drift droplets continue in their original direction where they are trapped by the notch on the inner side of the drift eliminator. 

• Material: PVC
• Weight: 5-10 Kg
• Condition: New
• Warranty: 1 Year
• After-Sales Service Provided: Spare Parts
• Color: Grey
• Module Depth: 135 mm
• Module Width: 600 mm

We are identified as one of chief PVC Drift Eliminator Manufacturers, Suppliers and Exporters from India. PVC Drift is designed keeping in accordance with industrial standards and norms. PVC Drift we offer is appreciated by the clients for its durability, longer service life, high strength and minimal maintenance. Moreover, PVC Drift Eliminator can be availed by the clients at leading market rates.

• Material: PVC
• Color: Black
• Size: 600x600 mm
• Shape: Square
• Usage/Application: To Reduce Water Loss and Emission
• Capacity: 50 kg

• Material: PVC
• Color: Black
• Thickness: 0.5-0.8mm
• Sheet Space: 34mm
• Width: 500mm
• Length: 1500mm

Requirement When The Air Passes Through The Drift Eliminator. Water Droplets Are Separated From The Air Drift At The Three Direction Change Points On The Drift Eliminator. For Cross flow Tower Applications, The Almost Vertical Water Conduits Provided by the CD-100 Drift Eliminator Remove the water droplets out of the drift eliminator area and return them back into the tower and does not allow any re-entry.Drift Eliminators, Made Out Of Rigid PVC, Are Designed To Remove Entrained Particles From Air Steam Efficiently, With Minimum Pressure Drop, Thereby Reducing The Fan Power

• Module Depth: 135 mm
• Module Width: 600 mm

PVC Drift is designed keeping in accordance with industrial standards and norms.PVC Drift Eliminator can be availed by the clients at leading market rates.

• Size: 600 x 300 x 150 mm ( 1 CFT ) and 600 x 150 x 150 mm ( 1/2 CFT )

Drift Eliminators, made out of rigid PVC, are designed to remove entrained particles from air steam efficiently, with minimum pressure drop, thereby reducing the fan power requirement when the air passes through the Drift Eliminator. Cooling tower fills of size 600 x 300 x 150 mm ( 1 CFT ) and 600 x 150 x 150 mm ( 12 CFT ) made of corrugated virging quality PVC film duly vacuum formed and edge folded for extended service life. Available in blue and black colors for cooling tower of FRP induced draft counter flow type and cross flow type. The edge folded technology will reduce the attrition loss of the fills and save the process equipment from fouling .

Drift eliminators are used to capture water droplets in the air stream that otherwise would be lost to the atmosphere. Entrapping these droplets is important for not only conserving water as a resource but also to prevent cooling tower water from contaminating the area peripheral to the cooling tower. The cooling tower industry uses drift rate to compare drift eliminator performance, a relationship that correlates droplet capture efficiency to the water circulation rate in a tower. COOLDECK’s drift eliminators are specifically designed to achieve maximum drift removal efficiency in both crossflow and counterflow tower applications with various product options available to minimize pressure drop, drift loss, cost, or a combination of all three.

We are offering pvc drift eliminators. We are actively engaged as a reputed pvc drift eliminators manufacturer and supplier in india. The wide array of pvc drift eliminators that we offer is mainly used in cooling towers. Pvc drift eliminators are basically installed in cooling towers so that the water and mist are captured in hot stream and prevented from escaping the cooling tower. Our pvc drift eliminators are made of high-grade components and parts. Clients can avail the precisely made pvc drift eliminators from us at very cost-effective prices. why our pvc drift eliminators? made from high-grade componentsreliablelonger service lifehigh performance industries catered : power plantchemicalfood processingpetrochemical.

We are the prominent manufacturer and supplier of a wide array of Drift Eliminator, which are widely used in diversified industries. The offered product is manufactured using the finest grade raw material and advanced technology in accordance with the international quality standards.

Pvc MM Aqua Drift Eliminator has successfully operated in cooling tower of all types. There are 3 different design of Drift Eliminator are available to meet any customers requirement.

We hold expertise in manufacturing and supplying precision engineered PVC Drift Eliminator. Fabricated with the best quality components, PVC Drift Eliminator, available with us, is robustly constructed and accurately dimensioned. Super Cool Cooling Tower provides D-15 DE, the best performance available at a competitive price. Salient Features of PVC Drift Eliminator Cellular type Eliminators having drift loss of 0.001 % of total circulating waterPreferably shipped in nested sheet from & glued at site to from blocksIt has low transportation costIt has width of supports 10 mm